SUSPENSION/ BRAKES

 
1 - 56 of 56 items
RRGS 4 Pot  Piston PH80 Brake Caliper ADELIN 4 PISTON BIG BRAKE KIT 2 COLORS Lowboy low down Shock Chrome Spring Adjustable Ruckus & GY6
RRGS 4 Pot Piston PH80 Brake CaliperADELIN 4 PISTON BIG BRAKE KIT 2 COLORS Lowboy low down Shock Chrome Spring Adjustable Ruckus & GY6

FAMOUS RRGS BRAKE CALIPER. THESE HAVE BEEN SOLD OUT FOR ALMOST 1 YEAR. WE HAVE ONLY A FEW. GET THEM WHILE YOU CAN. BLACK ONLY

 Looking for 4 POT Caliper and Mount for RRGS, NCY, or Adelin forks to use with the Grom Front Fork Adapters. Here they are. 

Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this Black Shock and Chrome Spring Shock

$199.00

$169.15

$160.00

$159.00

$119.25

TRS 8 INCH FATTY SHOCK ARM MADE FROM 6160 BILLET TRS RUCKUS TOW RINGS FRONT ( HOOKS )  BILLET USA MADE TRS RUCKUS TOW RINGS REAR ( HOOKS )  BILLET USA MADE
TRS 8 INCH FATTY SHOCK ARM MADE FROM 6160 BILLETTRS RUCKUS TOW RINGS FRONT ( HOOKS ) BILLET USA MADE TRS RUCKUS TOW RINGS REAR ( HOOKS ) BILLET USA MADE

TIRED OF YOUR STEEL SHOCK ARM BENDING OR CRACKING ON YOU? WELL HERE IS YOUR SOLUTION. OUR TRS BILLET 6061 SHOCK ARM IS BUILT STRONG AND MADE TO LAST. THIS SHOCK ARM COMES WITH THE HARDWARE AND SPACERS

Always trying to find a way to tie down your Ruckus? Mounting easily to the front fork assembly with supplied hardware in minutes giving you a sturdy place to attach tie-downs to your Ruckus. We have extended the hooks outwards for better...

Always trying to find a way to tie down your Ruckus? Mounting easily to the rear frame (Seat Area)  with supplied hardware in minutes giving you a sturdy place to attach tie-downs to your Ruckus. Keep the rear from bouncing around.

$125.00

$49.99

$49.99

$44.99

TRS Stifler Stablizer Bar Billet made in USA 2 Colors NCY 12MM X 250MM NEO CHROME FRONT AXLE FOR RUCKUS DISC KITS CNC Billet  levers for Disc / Disc Brake DUAL MASTER BLK OR SIL
TRS Stifler Stablizer Bar Billet made in USA 2 ColorsNCY 12MM X 250MM NEO CHROME FRONT AXLE FOR RUCKUS DISC KITSCNC Billet levers for Disc / Disc Brake DUAL MASTER BLK OR SIL

Stabilizes the seam where the main frame meets the rear frame. Made in the USA. Billet T6061 Comes in black or raw • T6061 Aluminum • Joint Rod Ends & nuts included

TRS 12MMX250MM. Got that RRGS fork kit but no axle. Same axle that comes in the NCY AND TRS Front end Kits. Get it NOW.  Not found in States IMPORTED

CNC Billet control CRG Style Top Quality with DUAL MASTER CYLINDERS for DISC FRONT AND REAR BRAKE WITH BRAKE SIGNAL SWITCHES.  SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN

$55.00

$49.50

$25.99

$22.09

$169.00

$160.54

BLACK STAINLESS BRAKE LINE WITH FITTINGS 28 INCH CNC Billet Control levers for Drum / Disc Brake BLACK OR POLISH CNC Billet lever for Disc Rear Brake LEFT SIDE ONLY 2 colors
BLACK STAINLESS BRAKE LINE WITH FITTINGS 28 INCH CNC Billet Control levers for Drum / Disc Brake BLACK OR POLISHCNC Billet lever for Disc Rear Brake LEFT SIDE ONLY 2 colors

BLACK STIANLESS BRAKE LINE WITH CHROME STRAIGHT FITTING AND 90 DEGREE CHROME BANJO FITTING ON OTHER END. MEASURES 28 INCHES FOR LINE. PERFECT FIT FOR THOSE RRGS/ADELINE FRONT END KITS.

 

CNC Billet control CRG Style Top Quality with Brake Switch Left for Clutch or Drum Brake Right for Disc Brake. SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN . We also install American Made O-ring in cup to help...

CNC Billet control CRG Style Top Quality with DUAL MASTER CYLINDERS for DISC FRONT AND REAR BRAKE WITH BRAKE SIGNAL SWITCHES.  SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN

$34.99

$29.74

$149.00

$134.10

(1)

$87.50

$78.75

LEFT SIDE REAR LEVER SWITCH AND BRACKET FOR CNC ADELIN LEVERS HARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR) Complete Front Hub w/ rotor adapter w/ all bolts included V2
LEFT SIDE REAR LEVER SWITCH AND BRACKET FOR CNC ADELIN LEVERS HARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR)Complete Front Hub w/ rotor adapter w/ all bolts included V2

All you riders with CNC levers and No Left hand switch we now have the solution in our PATENT PENDING Ruckus CNC Left hand switch. Comes with everything you need to install a left switch on your CNC levers. Fits Adelin and most other CNC Clutch...

HAVING ISSUES BLEEDING MASTER CYLINDER GET THESE BANJO WASHERS WITH SEAL COMES IN A PAIR WILL NEED 2 SETS IF YOU ARE DOING FRONT BRAKES. ONE SET FOR MASTER CYLINDER ONE SET FOR CALIPER SIDE.

Professional Crafted front Billet Hub for 4x90 pattern front wheels (common monkey wheels as well as most ruckus custom wheels on the market, with Brake Adapter flange, 3 Titanium Finish Rotor, 3 Stainless bolts to attach adapter plate, and...

$24.99

$22.49

$2.99

$2.84

$124.99

$112.49

TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 4/90 4/110 Blk or Raw NCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6
TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 4/90 4/110 Blk or Raw NCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6

RRGS / NCY FRONT HUB SPACER KIT THIS KIT IS TO CENTER WHEEL FOR AFTERMARKET FRONT HUB NORMALLY USED WITH DOUGLAS, TRS, OR OTHER RUCKS WHEELS. YOU MAY HAVE TO ADD (USING WASHER) OR REMOVE (FILE) A COUPLE THOUSANTH OFF THE SPACER AS WE HAVE NO...

Dual Pattern, 4 lug 4 inch lug spacing, four 12mm x 1.25 thread studs, for use with golf cart wheels OR 4x110 ATV pattern M10mmX 1.5MM For use with wheels measuring 3 inch back spacing and 4 or 5 inch front spacing 10 or 12 inch dimeter is OK....

Replacement brake cable for the following Honda Ruckus frame extension kits: 0300-0012 PASSWORD EXTENSION Overall length: 87"

 

$19.99

$18.79

$150.00

$142.50

$20.99

$16.79

EXTENDED BRAKE CABLE 101 INCH FREE SHIPPING EXTENDED BRAKE CABLE 91 INCH SHIPS FREE METAL RUBBER COATED REAR BRAKE CABLE HOLDER
EXTENDED BRAKE CABLE 101 INCH FREE SHIPPING EXTENDED BRAKE CABLE 91 INCH SHIPS FREE METAL RUBBER COATED REAR BRAKE CABLE HOLDER

101 INCH EXTENDED BRAKE CABLE TRUE 101 INCES. SEE PICS OF MEASUREMENT POINTS TO COMPARE. MADE IN CHINA *Don't forget to lube all cables with cable lube, WD-40 , or oil. All cables come dry and should always be lubed.

91 INCH EXTENDED BRAKE CABLE TRUE 91 INCES. SEE PICS OF MEASUREMENT POINTS TO COMPARE. MADE IN CHINA *Don't forget to lube all cables with cable lube, WD-40 , or oil. All cables come dry and should always be lubed.

METAL CLAMP WITH RUBBER COATING TO HOLD REAR BRAKE CABLE SO IT DOES NOT HIT THE LIP OF THE WHEEL. ATTACHES TO CVT AREA. SEE PIC

$24.99

$23.74

$22.00

$18.70

$3.00

RUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA FRONT BRAKE SWITCH RIGHTSIDE HONDA RUCKUS  FRONT END DISC KIT RRGS NCY OR  ADELIN SHIPS FREE
RUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA FRONT BRAKE SWITCH RIGHTSIDEHONDA RUCKUS FRONT END DISC KIT RRGS NCY OR ADELIN SHIPS FREE

TIRED OF ROCKING THAT LONG FRONT BRAKE CABLE WHEN YOU LOWER YOUR SHOCK FORKS? WE FIXED THAT. CUSTOM MADE FOR THE RUCK SHOP 39 INCH SHORT FRONT BRAKE CABLE TRUE 39 INCES.

 

COMMON BRAKE SWITCH FOUND ON CNC LEVERS, NCY BRAKE MASTER CYLINDERS AND MANY MORE.

RRGS LOW DOWN FRONT END KIT CONTENTS: 1 X SET OF BLACK RRGS LOW DOWN FORKS 1 X 4 PISTON CALIPER 1 X RRGS CALIPER MOUNT 1 X FLOATING ROTOR 1 X NCY FRONT AXLE 1 X SET OF TITANIUM COATED ROTOR BOLTS

$30.99

$27.89

$4.99

$4.49

$420.00

$378.00

ADELIN 4 POT REPLACEMENT BRAKE PAD SET PADS GY6 150  SHORT AXLE FOR FATTY MOD Taiwan made not chinese GY6 WHEEL FLANGED REAR WHEEL AXLE  NUT
ADELIN 4 POT REPLACEMENT BRAKE PAD SET PADSGY6 150 SHORT AXLE FOR FATTY MOD Taiwan made not chinese GY6 WHEEL FLANGED REAR WHEEL AXLE NUT

REPLACEMENT BRAKE PADS FOR THE 4 POT ADELIN CALIPER.

The Ruck Shop's Very Own. Short Axle used when installing a Fatty Tire/Rim combo with 12x8 or 10x8 rims on your GY6 Ruckus Swap. This is needed so your axle doesn't stick out like you are riding a Roman Chariot.

 

GY6 WHEEL FLANGED REAR WHEEL NUT FOR GY6 125CC AND 150CC MOTORS

$14.99

$13.79

$29.99

$25.49

$3.99

$3.59

GY6 REAR DRUM BRAKE SHOES GY6 TRANSMISSION BEARING KIT Honda  fit Brake Lever with BRAKE SWITCH  - BLACK
GY6 REAR DRUM BRAKE SHOESGY6 TRANSMISSION BEARING KITHonda fit Brake Lever with BRAKE SWITCH - BLACK

Rear Drum Brake Shoe Set for 150cc and 125cc GY6 engine based scooters. Fits other makes and models and found in many popular 13" wheel sizes. Outer Diameter: 125mm Thickness: 28mm

COMPLETE TRANSMISSION BEARING KIT WITH SEAL. COMES WITH ALL BEARINGs AND GASKET. IF YOU TAKE A BUTANE TORCH AND HEAT THE BACK OF THE PLATE THE BEARING USUALLY JUST FALL OUT. WE RECOMMEND YOU GET A NEW GASKET OR USE YAMABOND OR HONDABOND SEALANT.

Universal Fit Brake Lever. In Black. Great for those that want to run no left switch boxes or looking for a matching lever for the NCY front end kits. Comes with brack switch. USA Stainless hardware for clamp with nylock nut for shouldered bolt....

$14.99

$13.49

$34.99

$31.49

$14.99

$13.49

HONDA RUCKUS GROM FRONT FENDER W/ BRACKET & HARDWARE Lowboy low down Shock Chrome Adjustable Ruckus & GY6 230mm NCY PERFORMANCE SHOCK BLACK
HONDA RUCKUS GROM FRONT FENDER W/ BRACKET & HARDWARE Lowboy low down Shock Chrome Adjustable Ruckus & GY6 230mm NCY PERFORMANCE SHOCK BLACK

Tired of getting water in your face. We have the solution. OEM Honda Grom in either Black or Pearl White Fender along with our High Gloss Black Powdercaoted Stainless brackets and all the hardware that allow you to run this fender. Fills that gap...

Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this Aluminum and Chrome Spring Shock

High-quality, NCY-built rear performance shock for Honda's Ruckus improves ride, handling, and looks great - this part is sure to improve your Ruckus and finish your custom build in style! Measurements:

$95.00

$90.25

$159.00

$130.49

$109.00

$98.10

Lowboy low down Short Shock BlK Adjustable for Ruckus & GY6 NCY TRS DRAG LOW DOWN  FRONT FORKS RUCKUS ( RRGS GY6) 2 COLORS NCY Forged Brake Caliper 2 piston - black
Lowboy low down Short Shock BlK Adjustable for Ruckus & GY6 NCY TRS DRAG LOW DOWN FRONT FORKS RUCKUS ( RRGS GY6) 2 COLORSNCY Forged Brake Caliper 2 piston - black

Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this black on black rear shock. Top=Eye Bottom=Clevis 235mm, eye to clevis See difference in picture compared to NCY shock

TRS Ruckus Low Down Front Forks The TRS Drag Forks measure 3" shorter then the normal ncy, atr, rrgs and its about 1" shorter then the KN Low Down Forks. Custom drag forks are great for lowering your scooter without cutting springs and...

NCY FORGED 2 PISTON FRONT BRAKE CALIPER W/ PADS. YOU WILL NEED BANJO FITTING AND BANJO BOLT.

$125.00

$93.75

(1)

$225.00

$191.25

$107.99

$91.79

NCY Performance Brake Pads (Front)  Ruckus Zoomer RRGS / ADELIN 4 PISTON BIG BRAKE KIT 3 COLORS NCY Racing Brake Rear Drum Shoes (Blue) GY6 150cc+
NCY Performance Brake Pads (Front) Ruckus Zoomer RRGS / ADELIN 4 PISTON BIG BRAKE KIT 3 COLORSNCY Racing Brake Rear Drum Shoes (Blue) GY6 150cc+

Performance NCY front brake pads for Genuine Buddy 50.  The pad compound is long-wearing and ensures the best stopping power for your Buddy.

These also work with the NCY Honda Ruckus front end kits.

HAVE YOUR OWN FORKS BUT ARE LOOKING FOR 4 PISTON BRAKES. RRGS OR ADELIN (WHATEVER WE HAVE IN STOCK) CALIPER BRACKET,220MM FLOATING ROTOR, TITANIUM ROTOR BOLTS , 4 PISTON ADELIN CALIPER W/ PADS (BLACK, SILVER, OR RED)

PERFORMANCE REAR GY6 BRAKE SHOES BY NCY. HAS VENTED SHOES TO PREVENT GLAZING.

 

$20.99

$18.89

$260.00

$247.00

$20.99

$18.89

NCY Steering Stem/Triple Tree  Honda Ruckus BLACK NCY Steering Stem/Triple Tree  Honda Ruckus CHROME NCY TRS CALIPER ADAPTER 2 PISTON CALIPER
NCY Steering Stem/Triple Tree Honda Ruckus BLACKNCY Steering Stem/Triple Tree Honda Ruckus CHROMENCY TRS CALIPER ADAPTER 2 PISTON CALIPER

Now available in black, the NCY triple tree will add some stability, flash, and amazing quality to match your NCY front end disc conversion. SHIPS FREE TO 48 STATES

From NCY, makers of performance parts for Ruckus and many other top scooter models, we offer a Steering stem in chrome-plated aluminum. On a Ruckus, literally all of your parts are showing.

NCY caliper adapter. Looking to run RRGS, DIO or NCY fork but don't want to spend a fortune on Brake set up. This bracket fits on most aftermarket NCY and RRGS forks and allows you run a NCY

 

 

 

$279.99

$251.99

$279.99

$251.99

$30.00

$25.50

NeoChrome Brake Rotor Bolts TRS RRGS NCY DRUM ADAPTER NOW IN BILLET 6061 ALUMINUM 2 COLORS RRGS DRAG FRONT FORKS RUCKUS GY6  BLACK (DISC) SHIPS FREE
NeoChrome Brake Rotor BoltsTRS RRGS NCY DRUM ADAPTER NOW IN BILLET 6061 ALUMINUM 2 COLORSRRGS DRAG FRONT FORKS RUCKUS GY6 BLACK (DISC) SHIPS FREE

Very nice quality stainless titanium brake disk screws by NCY. Comes as a set of 3. OUT OF STOCK EVERYWHERE BUT HERE. WE HAVE THEM

Looking to run RRGS, Adelin, TRS or NCY front forks but wanna keep the OEM drum brakes. We have a fix for ya. Simple bolt on bracket with all the hardware and spacers included. These are now in Billet 6061

RRGS Ruckus Low Down Front Forks The RRGS Drag Forks measure 3" shorter then the normal ncy, atr, rrgs and its about 1" shorter then the KN Low Down Forks. Custom drag forks are great for lowering your scooter without cutting springs and...

$16.99

$15.29

$49.99

$225.00

$202.50

RRGS PH80 Replacement Brake Pads SPORT AND RACE Taida GY6 150 Engine Bushing Set (3pcs / set) TRS Stage 6 to CVK Carburetor Throttle Cable 75 INCH USA
RRGS PH80 Replacement Brake Pads SPORT AND RACE Taida GY6 150 Engine Bushing Set (3pcs / set)TRS Stage 6 to CVK Carburetor Throttle Cable 75 INCH USA

Just like any other pad, eventually they need to be replaced. Use these to replace your worn down PH80 Disc Brake Caliper Pads. RED= SPORT ORANGE = RACE

Is your motor sagging? These Taida GY6 bushing sets use a thick metal sleeve which makes installing bushings installation much easier.

TRS Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. TRS Throttle SSP to CVK throttle cable will also work...

$21.99

$19.79

$15.99

$15.19

$37.00

$33.30

TWIN POWER CHROME BANJO FITTING STRAIGHT 10MM GOODRIDGE BLACK BANJO FITTING 90 DEGREE 10MM GOODRIDGE BLACK BANJO FITTING STRAIGHT 10MM
TWIN POWER CHROME BANJO FITTING STRAIGHT 10MMGOODRIDGE BLACK BANJO FITTING 90 DEGREE 10MMGOODRIDGE BLACK BANJO FITTING STRAIGHT 10MM

TWIN POWER CHROME BANJO FITTING STRAIGHT 10MM USED NORMALLY ON RRGS CALIPERS OR NCY CALIPERS

GOODRIDGE 90 DEGREE 10MM BANJO FITTING USED NORMALLY ON RRGS CALIPERS OR NCY CALIPERS

GOODRIDGE STRAIGHT 10MM BANJO FITTING USED NORMALLY ON RRGS CALIPERS OR NCY CALIPERS

$10.95

$9.85

$20.50

$18.45

$13.95

$12.97

GOODRIDGE CHROME BANJO BOLT 10MM GOODRIDGE SHADOW BLACK STAINLESS BRAKE LINE 28" CHROME BANJO FITTING 90 DEGREE 10MM 3/8
GOODRIDGE CHROME BANJO BOLT 10MMGOODRIDGE SHADOW BLACK STAINLESS BRAKE LINE 28"CHROME BANJO FITTING 90 DEGREE 10MM 3/8

GOODRIDGE CHROME BANJO BOLT 10MM FOR FRONT BRAKE MASTER CYLINDERS ON CHINESE BILLET LEVERS AND OTHERS.

GOODRIDGE SHADOW BLACK BRAKE LINE 28" LINE SWIVEL ENDS  PERFECT FOR THOSE LOW FRONT ENDS NO MORE COILING THOSE BRAKE LINES

CHROME  90 DEGREE 10MM BANJO FITTING USED NORMALLY ON RRGS CALIPERS OR NCY CALIPERS

$7.50

$6.37

$34.59

$32.86

$9.95

$9.35

CLEAR  STAINLESS BRAKE LINE 28" TRS BANJO BOLT W/ BLEEDER -
CLEAR STAINLESS BRAKE LINE 28"TRS BANJO BOLT W/ BLEEDER -

CLEAR BRAKE LINE 28" LINE SWIVEL ENDS  PERFECT FOR THOSE LOW FRONT ENDS NO MORE COILING THOSE BRAKE LINES

Hydraulic banjo bolt with bleeder valve. Supplied with two sealing washers. When doing a disk conversion in tight quarters, these bolts allow for easy access to bleed your system. M8x1.25mm works

$28.95

$26.05

$6.00

$4.80

1 - 56 of 56 items