SUSPENSION/ BRAKES

 
     
    1 - 71 of 71 items
    RRGS 4 Pot  Piston PH80 Brake Caliper 75" Throttle Cable for CVK Carb on Ruckus or GY6 w/ adjuster USA ADELIN 4 POT REPLACEMENT BRAKE PAD SET PADS
    RRGS 4 Pot Piston PH80 Brake Caliper75" Throttle Cable for CVK Carb on Ruckus or GY6 w/ adjuster USAADELIN 4 POT REPLACEMENT BRAKE PAD SET PADS

    FAMOUS RRGS BRAKE CALIPER. THESE HAVE BEEN SOLD OUT FOR ALMOST 1 YEAR. WE HAVE ONLY A FEW. GET THEM WHILE YOU CAN. BLACK ONLY

    Throttle cable with a 76" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb. This is the most popular cable lenght used for Honda

    REPLACEMENT BRAKE PADS FOR THE 4 POT ADELIN CALIPER.

    $199.00

    $169.15

    $22.00

    $20.90

    $14.99

    $13.79

    BLACK STAINLESS BRAKE LINE WITH FITTINGS 30 INCH CHROME BANJO FITTING 90 DEGREE 10MM 3/8 CLEAR  STAINLESS BRAKE LINE 28"
    BLACK STAINLESS BRAKE LINE WITH FITTINGS 30 INCH CHROME BANJO FITTING 90 DEGREE 10MM 3/8 CLEAR STAINLESS BRAKE LINE 28"

    BLACK STIANLESS BRAKE LINE WITH CHROME STRAIGHT FITTING AND 90 DEGREE CHROME BANJO FITTING ON OTHER END. MEASURES 30 INCHES FOR LINE. TOTAL LENGHT 33 INCHES. PERFECT FIT FOR THOSE RRGS/ADELINE FRONT END KITS.

     

    CHROME  90 DEGREE 10MM BANJO FITTING USED NORMALLY ON RRGS CALIPERS OR NCY CALIPERS

    CLEAR BRAKE LINE 28" LINE SWIVEL ENDS  PERFECT FOR THOSE LOW FRONT ENDS NO MORE COILING THOSE BRAKE LINES

    $34.99

    $29.74

    $9.95

    $9.35

    $28.95

    $26.05

    CNC Billet  levers for Disc / Disc Brake DUAL MASTER BLK OR SIL CNC Billet Control levers for Drum / Disc Brake BLACK OR POLISH CNC Billet lever for Disc Rear Brake LEFT SIDE ONLY BLACK
    CNC Billet levers for Disc / Disc Brake DUAL MASTER BLK OR SIL CNC Billet Control levers for Drum / Disc Brake BLACK OR POLISHCNC Billet lever for Disc Rear Brake LEFT SIDE ONLY BLACK

    CNC Billet control CRG Style Top Quality with DUAL MASTER CYLINDERS for DISC FRONT AND REAR BRAKE WITH BRAKE SIGNAL SWITCHES.  SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN

    CNC Billet control CRG Style Top Quality with Brake Switch Left for Clutch or Drum Brake Right for Disc Brake. SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN . We also install American Made O-ring in cup to help...

    CNC Billet control CRG Style Top Quality with DUAL MASTER CYLINDERS for DISC FRONT AND REAR BRAKE WITH BRAKE SIGNAL SWITCHES.  SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN

    $169.00

    $160.54

    $149.00

    $126.65

    $87.50

    $78.75

    Complete Front Hub w/ rotor adapter w/ all bolts included V2 DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 Blk or Raw DYNA BEADS TIRE BALANCING CERAMIC BEADS
    Complete Front Hub w/ rotor adapter w/ all bolts included V2 DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 Blk or Raw DYNA BEADS TIRE BALANCING CERAMIC BEADS

    Professional Crafted front Billet Hub for 4x90 pattern front wheels (common monkey wheels as well as most ruckus custom wheels on the market, with Brake Adapter flange, 3 Titanium Finish Rotor, 3 Stainless bolts to attach adapter plate, and...

    Dual Pattern, 4 lug 4 inch lug spacing, four 12mm x 1.25 thread studs, for use with golf cart wheels OR 4x110 ATV pattern M10mmX 1.5MM For use with wheels measuring 3 inch back spacing and 4 or 5 inch front spacing 10 or 12 inch dimeter is OK....

    Motorcycles and Scooters ride s-m-o-o-t-h with Dyna Beads ®! You simply won't believe the ride... Glass smooth ride, every time, all the time. Dramatically longer tire life No rebalancing No spoke or rim weights Eliminates tire cupping. Easy...

    $124.99

    $118.74

    $150.00

    $142.50

    $15.99

    EXTENDED BRAKE CABLE 101 INCH FREE SHIPPING EXTENDED BRAKE CABLE 91 INCH SHIPS FREE FLP KYMCO HUB ADAPTER 4/110 4X4 AND 4/90 BOLT PATTERN
    EXTENDED BRAKE CABLE 101 INCH FREE SHIPPING EXTENDED BRAKE CABLE 91 INCH SHIPS FREE FLP KYMCO HUB ADAPTER 4/110 4X4 AND 4/90 BOLT PATTERN

    101 INCH EXTENDED BRAKE CABLE TRUE 101 INCES. SEE PICS OF MEASUREMENT POINTS TO COMPARE. MADE IN CHINA *Don't forget to lube all cables with cable lube, WD-40 , or oil. All cables come dry and should always be lubed.

    91 INCH EXTENDED BRAKE CABLE TRUE 91 INCES. SEE PICS OF MEASUREMENT POINTS TO COMPARE. MADE IN CHINA *Don't forget to lube all cables with cable lube, WD-40 , or oil. All cables come dry and should always be lubed.

    Looking to run 4/110 wheels on your GET ? We have adapters in stock. Hub adapter has 4/110 , 4X4 and TRS 4/90 bolt pattern. You will need to run a 4+4 offset wheel since adapter is 1" think. Call us for detail as we have 12x8 4+4 Rims in stock....

    $24.99

    $23.74

    $22.00

    $18.70

    $95.00

    Forsa Ruckus Performance Shock - 252mm FRONT BRAKE SWITCH RIGHTSIDE GOODRIDGE BLACK BANJO BOLT 10MM
    Forsa Ruckus Performance Shock - 252mmFRONT BRAKE SWITCH RIGHTSIDEGOODRIDGE BLACK BANJO BOLT 10MM

    Heavier Riders get rid of that soft shock. After-Market Adjustable Performance Shock for the 50cc Honda Ruckus. No modification necessary - can be used with stock air box! 

    COMMON BRAKE SWITCH FOUND ON CNC LEVERS, NCY BRAKE MASTER CYLINDERS AND MANY MORE.

    GOODRIDGE SHADOW BLACK BANJO BOLT 10MM FOR FRONT BRAKE MASTER CYLINDERS ON CHINESE BILLET LEVERS AND OTHERS.

    $79.99

    $4.99

    $4.49

    $9.95

    $8.95

    GOODRIDGE BLACK BANJO FITTING 90 DEGREE 10MM GOODRIDGE BLACK BANJO FITTING STRAIGHT 10MM GOODRIDGE CHROME BANJO BOLT 10MM
    GOODRIDGE BLACK BANJO FITTING 90 DEGREE 10MMGOODRIDGE BLACK BANJO FITTING STRAIGHT 10MMGOODRIDGE CHROME BANJO BOLT 10MM

    GOODRIDGE 90 DEGREE 10MM BANJO FITTING USED NORMALLY ON RRGS CALIPERS OR NCY CALIPERS

    GOODRIDGE STRAIGHT 10MM BANJO FITTING USED NORMALLY ON RRGS CALIPERS OR NCY CALIPERS

    GOODRIDGE CHROME BANJO BOLT 10MM FOR FRONT BRAKE MASTER CYLINDERS ON CHINESE BILLET LEVERS AND OTHERS.

    $20.50

    $18.45

    $13.95

    $7.50

    $6.37

    GOODRIDGE SHADOW BLACK STAINLESS BRAKE LINE 28" HARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR) Honda  fit Brake Lever with BRAKE SWITCH  - BLACK
    GOODRIDGE SHADOW BLACK STAINLESS BRAKE LINE 28"HARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR)Honda fit Brake Lever with BRAKE SWITCH - BLACK

    GOODRIDGE SHADOW BLACK BRAKE LINE 28" LINE SWIVEL ENDS  PERFECT FOR THOSE LOW FRONT ENDS NO MORE COILING THOSE BRAKE LINES

    HAVING ISSUES BLEEDING MASTER CYLINDER GET THESE BANJO WASHERS WITH SEAL COMES IN A PAIR WILL NEED 2 SETS IF YOU ARE DOING FRONT BRAKES. ONE SET FOR MASTER CYLINDER ONE SET FOR CALIPER SIDE.

    Universal Fit Brake Lever. In Black. Great for those that want to run no left switch boxes or looking for a matching lever for the NCY front end kits. Comes with brack switch. USA Stainless hardware for clamp with nylock nut for shouldered bolt....

    $34.59

    $2.99

    $2.84

    $14.99

    $13.49

    HONDA LOWER RACE FOR STEERING STEM TRIPLE TREE HONDA RUCKUS  FRONT END DISC KIT RRGS NCY OR  ADELIN SHIPS FREE HONDA RUCKUS front or Rear Brake Shoes Pads
    HONDA LOWER RACE FOR STEERING STEM TRIPLE TREE HONDA RUCKUS FRONT END DISC KIT RRGS NCY OR ADELIN SHIPS FREE HONDA RUCKUS front or Rear Brake Shoes Pads

    JUST ORDERED THE NCY TRIPLE TREE DON'T WASTE TIME BEATING THE OLD RACE OUT OF YOUR STOCK FORK SET UP RACE, STEERING CONE (LOWER) 53212-GEE-000

    RRGS LOW DOWN FRONT END KIT CONTENTS: 1 X SET OF BLACK RRGS LOW DOWN FORKS 1 X 4 PISTON CALIPER 1 X RRGS CALIPER MOUNT 1 X FLOATING ROTOR 1 X NCY FRONT AXLE 1 X SET OF TITANIUM COATED ROTOR BOLTS

    Front or Rear Brake shoes for Honda Ruckus

    $8.25

    $420.00

    $378.00

    $17.99

    HONDA RUCKUS GROM FRONT FENDER W/ BRACKET & HARDWARE HONDA RUCKUS OEM FORK NECK BEARING KIT ALL PARTS KICKSTAND FOR LOWERED HONDA RUCKUS ZOOMER MADE IN USA SHIPS FREE
    HONDA RUCKUS GROM FRONT FENDER W/ BRACKET & HARDWARE HONDA RUCKUS OEM FORK NECK BEARING KIT ALL PARTS KICKSTAND FOR LOWERED HONDA RUCKUS ZOOMER MADE IN USA SHIPS FREE

    Tired of getting water in your face. We have the solution. OEM Honda Grom in either Black or Pearl White Fender along with our High Gloss Black Powdercaoted Stainless brackets and all the hardware that allow you to run this fender. Fills that gap...

    Upon popular request we now sell all the parts for the Ruckus fork stems. Comes with parts 16,3,24,21,20,1,2,19,22 . These parts are all OEM Honda factory parts and come as a kit.

    This compact kickstand design is made for your lowered Honda ruckus. Simple from the outside yet in contains a spring loaded ball bearing locking mechanism on the inside. Powder Coated Gloss black and Made 100% in America.

    $95.00

    $90.25

    $69.00

    $84.00

    $71.39

    KYMCO HUB FOR HONDA RUCKUS 4/140 BOLT LEFT SIDE REAR LEVER SWITCH AND BRACKET FOR CNC ADELIN LEVERS Lowboy low down Shock Chrome Adjustable Ruckus & GY6 230mm
    KYMCO HUB FOR HONDA RUCKUS 4/140 BOLT LEFT SIDE REAR LEVER SWITCH AND BRACKET FOR CNC ADELIN LEVERS Lowboy low down Shock Chrome Adjustable Ruckus & GY6 230mm

    LOOKING TO RUN A FATTY RIM ON A HONDA RUCKUS MOTOR HERE'S THE HUB YOU NEED. WILL REQUIRE YOU TO REMOVE THE STUD AND USE BOLTS TO USE ON AFTERMARKET WHEEL. HUB HAS 4/140 BOLT PATTERN.

    All you riders with CNC levers and No Left hand switch we now have the solution in our PATENT PENDING Ruckus CNC Left hand switch. Comes with everything you need to install a left switch on your CNC levers. Fits Adelin and most other CNC Clutch...

    Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this Aluminum and Chrome Spring Shock

    $56.00

    $43.68

    $24.99

    $22.49

    $159.00

    $130.49

    Lowboy low down Short Shock BlK Adjustable for Ruckus & GY6 NCY METAL RUBBER COATED REAR BRAKE CABLE HOLDER NCY 12MM X 250MM NEO CHROME FRONT AXLE FOR RUCKUS DISC KITS
    Lowboy low down Short Shock BlK Adjustable for Ruckus & GY6 NCY METAL RUBBER COATED REAR BRAKE CABLE HOLDERNCY 12MM X 250MM NEO CHROME FRONT AXLE FOR RUCKUS DISC KITS

    Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this black on black rear shock. Top=Eye Bottom=Clevis 235mm, eye to clevis See difference in picture compared to NCY shock

    METAL CLAMP WITH RUBBER COATING TO HOLD REAR BRAKE CABLE SO IT DOES NOT HIT THE LIP OF THE WHEEL. ATTACHES TO CVT AREA. SEE PIC

    TRS 12MMX250MM. Got that RRGS fork kit but no axle. Same axle that comes in the NCY AND TRS Front end Kits. Get it NOW.  Not found in States IMPORTED

    $125.00

    $98.75

    $3.00

    $2.84

    $25.99

    $22.09

    NCY Blue Brake Shoes (Drum) Honda Ruckus, Met for Front or Rear NCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6 NCY Forged Brake Caliper 2 piston - black
    NCY Blue Brake Shoes (Drum) Honda Ruckus, Met for Front or RearNCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6 NCY Forged Brake Caliper 2 piston - black

    NCY Blue Brake Shoes (Drum) Honda Ruckus, Metropolitan NCY High Performance Grooved Brake Shoes - Honda Ruckus & Metropolitan High friction grooved linings, efficiency improves with heat. NCY Blue Series brake shoes are made using high...

    Replacement brake cable for the following Honda Ruckus frame extension kits: 0300-0012 PASSWORD EXTENSION Overall length: 87"

     

    NCY FORGED 2 PISTON FRONT BRAKE CALIPER W/ PADS. YOU WILL NEED BANJO FITTING AND BANJO BOLT.

    $22.99

    $20.69

    $20.99

    $16.79

    $107.99

    $91.79

    NCY Front End Kit  ( Black Fork ) For Honda Ruckus 03-16 NCY Front End Kit, (Titanium Grey) ; Honda Ruckus 03-16 NCY Performance Brake Pads (Front)  Ruckus Zoomer
    NCY Front End Kit ( Black Fork ) For Honda Ruckus 03-16NCY Front End Kit, (Titanium Grey) ; Honda Ruckus 03-16NCY Performance Brake Pads (Front) Ruckus Zoomer

    NEW STYLE NCY Honda Ruckus / Zoomer Big Brake Kit. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer. Shocks have a high quality titanium grey finish. Includes: Front fork / shock Dual...

    NEW STYLE NCY Honda Ruckus / Zoomer Big Brake Kit. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer. Shocks have a high quality titanium grey finish. Includes: Front fork / shock Dual...

    Performance NCY front brake pads for Genuine Buddy 50.  The pad compound is long-wearing and ensures the best stopping power for your Buddy.

    These also work with the NCY Honda Ruckus front end kits.

    $519.00

    $467.10

    $519.00

    $467.10

    $20.99

    $18.89

    NCY PERFORMANCE SHOCK BLACK NCY Slammed Front End Kit (All Black) for Honda Ruckus 03-16 NCY Slammed Front Forks lower than RRGS
    NCY PERFORMANCE SHOCK BLACKNCY Slammed Front End Kit (All Black) for Honda Ruckus 03-16NCY Slammed Front Forks lower than RRGS

    High-quality, NCY-built rear performance shock for Honda's Ruckus improves ride, handling, and looks great - this part is sure to improve your Ruckus and finish your custom build in style! Measurements:

    NCY Slammed Honda Ruckus / Zoomer Front End Kit. MOAR LOW is the name of the game for our newest exclusive NCY FEK. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer or Metropolitan (with...

     NCY Slammed Honda Ruckus / Zoomer Front End Kit. (THESE ARE NOT THE SAME AS FOUND IN THE SLAMMED FRONT END KIT THEY ARE LOWERED)

    $109.00

    $100.28

    $699.00

    $594.15

    $199.00

    $189.05

    NCY Steering Stem/Triple Tree  Honda Ruckus BLACK NCY Steering Stem/Triple Tree  Honda Ruckus CHROME NCY TRS CALIPER ADAPTER 2 PISTON CALIPER
    NCY Steering Stem/Triple Tree Honda Ruckus BLACKNCY Steering Stem/Triple Tree Honda Ruckus CHROMENCY TRS CALIPER ADAPTER 2 PISTON CALIPER

    Now available in black, the NCY triple tree will add some stability, flash, and amazing quality to match your NCY front end disc conversion. SHIPS FREE TO 48 STATES

    From NCY, makers of performance parts for Ruckus and many other top scooter models, we offer a Steering stem in chrome-plated aluminum. On a Ruckus, literally all of your parts are showing.

    NCY caliper adapter. Looking to run RRGS, DIO or NCY fork but don't want to spend a fortune on Brake set up. This bracket fits on most aftermarket NCY and RRGS forks and allows you run a NCY

     

     

     

    $279.99

    $251.99

    $279.99

    $251.99

    $30.00

    NeoChrome Brake Rotor Bolts PARTS BY  MAX 2mm STACKABLE SPACER FOR GY6 HUB Polished Douglas 12x5  3+2 4/140 Ruckus Fatty Rim CUSTOM
    NeoChrome Brake Rotor BoltsPARTS BY MAX 2mm STACKABLE SPACER FOR GY6 HUBPolished Douglas 12x5 3+2 4/140 Ruckus Fatty Rim CUSTOM

    Very nice quality stainless titanium brake disk screws by NCY. Comes as a set of 3. OUT OF STOCK EVERYWHERE BUT HERE. WE HAVE THEM

    2mm stackable positive offset spacer for gy6 hub. USE THESE TO CENTER YOUR WHEEL OR TO OFFSET HUB SO AFTERMARKET WHEELS CAN CLEAR AXLE.

    $10 EACH SHIPS FREE 

    Douglas 12x5 3+2 Offset with 4/140 bolt pattern. Polished Rim. Red Label Must use an Kymco hub. No need to open holes we do it for you.  This wheel is for mainly used on the Honda Metropolitan or 12x5 Mini Fatty.

    $16.99

    $15.29

    $10.00

    $9.00

    $150.00

    Polished Douglas 12x8  3+5 4/137 Ruckus Fatty Rim RED Label RRGS / ADELIN 4 PISTON BIG BRAKE KIT 3 COLORS RRGS DRAG FRONT FORKS RUCKUS GY6  BLACK (DISC) SHIPS FREE
    Polished Douglas 12x8 3+5 4/137 Ruckus Fatty Rim RED LabelRRGS / ADELIN 4 PISTON BIG BRAKE KIT 3 COLORSRRGS DRAG FRONT FORKS RUCKUS GY6 BLACK (DISC) SHIPS FREE

    Douglas 12x8 3+5 Offset with 4/137 .190mm 10mm bolt pattern. Polished Rim. Must use an Kymco hub or similar. This wheel is for a GET motor. Customer must have a long stretch kit to clear wheel.

     

    HAVE YOUR OWN FORKS BUT ARE LOOKING FOR 4 PISTON BRAKES. RRGS OR ADELIN (WHATEVER WE HAVE IN STOCK) CALIPER BRACKET,220MM FLOATING ROTOR, TITANIUM ROTOR BOLTS , 4 PISTON ADELIN CALIPER W/ PADS (BLACK, SILVER, OR RED)

    RRGS Ruckus Low Down Front Forks The RRGS Drag Forks measure 3" shorter then the normal ncy, atr, rrgs and its about 1" shorter then the KN Low Down Forks. Custom drag forks are great for lowering your scooter without cutting springs and...

    $138.95

    $260.00

    $225.00

    $202.50

    RRGS PH80 Replacement Brake Pads SPORT AND RACE Ruckus GET 49cc Engine Stretch 9.5" Extension w/ brake cable RUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA
    RRGS PH80 Replacement Brake Pads SPORT AND RACE Ruckus GET 49cc Engine Stretch 9.5" Extension w/ brake cable RUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA

    Just like any other pad, eventually they need to be replaced. Use these to replace your worn down PH80 Disc Brake Caliper Pads. RED= SPORT ORANGE = RACE

    TRS 9.5 Extension kit V2 NOW IN GLOSS BLACK.  FITS ALL NPS-50 2003 And Newer.  Updated version now is TIG welded, with locking design so everything is trued.  EVERY PIECE OF THIS IS MADE IN THE USA, Even the washers. 

    TIRED OF ROCKING THAT LONG FRONT BRAKE CABLE WHEN YOU LOWER YOUR SHOCK FORKS? WE FIXED THAT. CUSTOM MADE FOR THE RUCK SHOP 39 INCH SHORT FRONT BRAKE CABLE TRUE 39 INCES.

     

    $21.99

    $159.95

    $143.95

    $30.99

    TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS TRS AXLE SPOOL 12mm axle MADE IN USA Fork Protector 3 colors TRS BANJO BOLT W/ BLEEDER -
    TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS TRS AXLE SPOOL 12mm axle MADE IN USA Fork Protector 3 colors TRS BANJO BOLT W/ BLEEDER -

    RRGS / NCY FRONT HUB SPACER KIT THIS KIT IS TO CENTER WHEEL FOR AFTERMARKET FRONT HUB NORMALLY USED WITH DOUGLAS, TRS, OR OTHER RUCKS WHEELS. YOU MAY HAVE TO ADD (USING WASHER) OR REMOVE (FILE) A COUPLE THOUSANTH OFF THE SPACER AS WE HAVE NO...

     We were tired of waiting for these to come in stock so we made our own. Fits all 12mm axles.. Made from 6061 Billet Aluminum right here in the USA. Comes in Raw, Anodized Black or Red

    Hydraulic banjo bolt with bleeder valve. Supplied with two sealing washers. When doing a disk conversion in tight quarters, these bolts allow for easy access to bleed your system. M8x1.25mm works

    $19.99

    $18.79

    $34.99

    $27.99

    $6.00

    $4.80

    TRS Billet Aluminum Frame Caps Plugs  - 11 Styles ON SALE NOW TRS BILLET CNC HONDA RUCKUS METROPOLITAN BRAKE LEVERS V2 TRS DRAG LOW DOWN  FRONT FORKS RUCKUS ( RRGS GY6) 2 COLORS
    TRS Billet Aluminum Frame Caps Plugs - 11 Styles ON SALE NOWTRS BILLET CNC HONDA RUCKUS METROPOLITAN BRAKE LEVERS V2TRS DRAG LOW DOWN FRONT FORKS RUCKUS ( RRGS GY6) 2 COLORS

    Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly...

    HAVE DRUM BRAKES? WANT THAT CUSTOM LOOK. WE GOT YOU COVERED. BILLET 6160 SHORT LEVERS FOR THE HONDA RUCKUS / ZOOMER / METROPOLITAN. ALLOWS THE USE OF BRAKE LOCK AND BOTH SWITCHES. RAW OR ANODIZED BLACK INTRODUCTION PRICED AND FREE SHIPPING.

    TRS Ruckus Low Down Front Forks The TRS Drag Forks measure 3" shorter then the normal ncy, atr, rrgs and its about 1" shorter then the KN Low Down Forks. Custom drag forks are great for lowering your scooter without cutting springs and...

    $28.00

    $19.59

    $69.99

    $55.99

    $225.00

    $191.25

    TRS FORWARD FOOTREST PEG LEGS FOR  HONDA RUCKUS MADE IN USA TRS Frame Extension Mount for Fatty Rim using Stock Ruckus Motor TRS Honda  Ruckus / Zoomer Ultimate CNC Handlebar Black v2
    TRS FORWARD FOOTREST PEG LEGS FOR HONDA RUCKUS MADE IN USATRS Frame Extension Mount for Fatty Rim using Stock Ruckus MotorTRS Honda Ruckus / Zoomer Ultimate CNC Handlebar Black v2

    The TRS FORWARD FOOTREST is a great addition to your ruckus for that extra leg room. Great for riders who are taller or want another leg position. Attaches to side of frame.

    Ruckus GET FATTY FOR 8" WHEEL conversion mount. Allows you to run the 12x8, OR 10x8 Fatty rim. Our mount is a SOLID piece of BILLET ALUMINUM so it's super strong. 

     

    The TRS ULTIMATE BAR Setup... It's The Ultimate Ruckus Steering System. Period! That's it!!! That's the name... That's what it is... You won't find a cleaner looking integrated handlebar and stem combo from anywhere else. We here at THE RUCK SHOP...

    $65.00

    $58.50

    (1)

    $399.00

    $379.04

    $399.00

    $371.07

    TRS RRGS NCY DRUM ADAPTER NOW IN BILLET 6061 ALUMINUM 2 COLORS TRS RUCKUS OG CNC HANDLEBAR  CNC BILLET 35MM TRS TRANSFORMER HANDLE BARS 7 COLORS 7/8 RUCKUS GROM
    TRS RRGS NCY DRUM ADAPTER NOW IN BILLET 6061 ALUMINUM 2 COLORSTRS RUCKUS OG CNC HANDLEBAR CNC BILLET 35MM TRS TRANSFORMER HANDLE BARS 7 COLORS 7/8 RUCKUS GROM

    Looking to run RRGS, Adelin, TRS or NCY front forks but wanna keep the OEM drum brakes. We have a fix for ya. Simple bolt on bracket with all the hardware and spacers included. These are now in Billet 6061

    THE RUCK SHOP IS BRINGING BACK THE OG (ORIGINAL GANGSTAR) BARS. YOU O.G. RIDERS REMEMBER THESE. WELL, THEY ARE BACK. YOU WILL NEED 35MM CLIP ON BARS WHICH YOU CAN FIND FOR UNDER $50. THIS IS A INEXPENSIVE WAY TO GET SOME AWESOME BARS ON YOUR...

    EVER GET TIRED OF THE SAME STYLE HANDLE BARS? WITH THE NEW TRS TRANSFORMER BARS YOU CAN USE YOUR IMAGINATION WITH OVER 50 DIFFERENT STYLES TO CREATE!! AVAILABLE IN ANODIZED BLACK, RED, LIME GREEN, GUN METAL, SILVER, ORANGE, AND BLUE. EACH SET...

    $49.99

    $42.49

    $125.00

    $118.75

    $99.00

    $87.12

    (1)
    TWIN POWER CHROME BANJO FITTING STRAIGHT 10MM UNIVERSAL 35MM  CLIP ONS BARS SILVER OR BLACK
    TWIN POWER CHROME BANJO FITTING STRAIGHT 10MMUNIVERSAL 35MM CLIP ONS BARS SILVER OR BLACK

    TWIN POWER CHROME BANJO FITTING STRAIGHT 10MM USED NORMALLY ON RRGS CALIPERS OR NCY CALIPERS

    Universal Clip on Handlebars 35mm in 7/8. Perfect for our TRS OG HANDLEBARS . This bars allow you to adjust your pullback and your angle. So many combinations for every riders feel.

    $10.95

    $59.99

    $53.99

    1 - 71 of 71 items