RUCKUS

 
     
    121 - 240 of 266 items
    TRS Honda Ruckus Headlight Lowering Kit  Bolt-On! 3 COLORS CUSTOM YOSHIMURA TITANIUM KEY CHAIN KEYCHAIN DANMAXX GY6 ENGINE SWAP HARNESS W/ CDI , RELAY, COIL , REC.
    TRS Honda Ruckus Headlight Lowering Kit Bolt-On! 3 COLORSCUSTOM YOSHIMURA TITANIUM KEY CHAIN KEYCHAINDANMAXX GY6 ENGINE SWAP HARNESS W/ CDI , RELAY, COIL , REC.

    Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower,

    CUSTOM YOSHIMURA REAL TITANIUM HEADER FLANGE KEYCHAIN. Genuine Yoshimura with Japanese Kanji writing. Once these are gone they are gone.

    Parts Shop MAX Honda Ruckus 150cc GY6 motor swap harnes with CDI , COIL , RECTIFIER, AND STARTER RELAY WHEN BOUGHT THROUGH THE RUCK SHOP. MAX GY6 Ruckus Wire Harness Features: ~ Made for GY6 motor with stock or aftermarket controls ~ More...

    $48.00

    $40.79

    $9.00

    $7.65

    $175.00

    $168.00

    DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 Blk or Raw Dr  Pulley Sliding Sliders 16X13 Roller weights for Ruckus 49cc DYNA BEADS TIRE BALANCING CERAMIC BEADS
    DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 Blk or Raw Dr Pulley Sliding Sliders 16X13 Roller weights for Ruckus 49cc DYNA BEADS TIRE BALANCING CERAMIC BEADS

    Dual Pattern, 4 lug 4 inch lug spacing, four 12mm x 1.25 thread studs, for use with golf cart wheels OR 4x110 ATV pattern M10mmX 1.5MM For use with wheels measuring 3 inch back spacing and 4 or 5 inch front spacing 10 or 12 inch dimeter is OK....

    Expect better performance from your scooter, period. No matter what stage you are in upgrading your scooter, simply add Dr. Pulley weights and a kevlar belt for a power upgrade. Dr. Pulley roller weights are the most advanced weights available....

    Motorcycles and Scooters ride s-m-o-o-t-h with Dyna Beads ®! You simply won't believe the ride... Glass smooth ride, every time, all the time. Dramatically longer tire life No rebalancing No spoke or rim weights Eliminates tire cupping. Easy...

    $150.00

    $142.50

    $16.99

    $15.29

    $15.99

    $15.19

    Exhaust Cap Nuts for GY6 150cc 125cc QMB139 & Honda 49cc engine Exhaust studs for GY6 150cc and  Honda 49cc engine M6 FLP KYMCO HUB ADAPTER 4/110 4X4 AND 4/90 BOLT PATTERN
    Exhaust Cap Nuts for GY6 150cc 125cc QMB139 & Honda 49cc engineExhaust studs for GY6 150cc and Honda 49cc engine M6FLP KYMCO HUB ADAPTER 4/110 4X4 AND 4/90 BOLT PATTERN

    Exhaust Cap Nuts for GY6 150cc/125cc and QMB139 50cc engines.

    Exhaust studs for GY6 150cc/125cc,QMB139, & Honda 50cc engines . M6 can be used on both 49cc and 150cc gy6 . HONDA 49cc use 6mm and most stock gy6 use 6mm as well. Big Bore Heads usually use M8.

    Looking to run 4/110 wheels on your GET ? We have adapters in stock. Hub adapter has 4/110 , 4X4 and TRS 4/90 bolt pattern. You will need to run a 4+4 offset wheel since adapter is 1" think. Call us for detail as we have 12x8 4+4 Rims in stock....

    $1.99

    $1.79

    $1.99

    $1.79

    $119.00

    $107.10

    FUEL FILTER 90 TURN HORIZONTAL Gates Power Link Premium BELT HONDA RUCKUS GIFT CERTIFICATE IN $25, $50, $75 OR $100
    FUEL FILTER 90 TURN HORIZONTALGates Power Link Premium BELT HONDA RUCKUSGIFT CERTIFICATE IN $25, $50, $75 OR $100

    PERFECT STOCK OEM REPLACEMENT FUEL FILTER

    Gates Premium Power Link drive belt size 785X17.9X30 for the HONDA RUCKUS. Specifically designed for a variety of motorized CVT applications including street-legal scooters and go-karts.

     

    HAVE SOMEONE SPECIAL THAT IS HARD TO SHOP FOR ON THEIR BIRTHDAY, HOLIDAY, OR JUST A SPECIAL OCCASION. THE RUCK SHOP HAS YOU COVERED. ORDER A GIFT CERTIFICATE IN $25,$50,$75 OR $100 DOLLAR DENOMINATIONS. EACH GIFT CERTIFICATE HAS A UNIQUE CODE THAT...

    $6.95

    $6.25

    $22.99

    $20.69

    $0.00

    Genuine OKO 30mm CVK Carburetor w/ electric choke Taiwan GY6 CVK Main Jet Kit  jets 100-140 sizes GY6 OIL DIPSTICK NCY (TITANIUM)
    Genuine OKO 30mm CVK Carburetor w/ electric choke Taiwan GY6 CVK Main Jet Kit jets 100-140 sizesGY6 OIL DIPSTICK NCY (TITANIUM)

    30mm High Performance, After-Market CVK Carburetor for 150cc and 125cc GY6 4-stroke engines found on full-size street legal scooters, ATVs and off-road karts. Includes accelerator pump Air Filter Mount (outer diameter)

    Keihin Round Style Main Jet Kit Includes The Following Sizes: 100, 105, 108, 110, 114, 115, 120, 125, 130 & 140 10 Piece Set Has 1 of Each Size Thread Size: M5x0.80 Overall Length: 8mm

    NCY upgrade/replacement dipstick. Give your oil dipstick a stunning look with this titanium finish. Quality upgrade that looks great on your bike. Works on all GY6 125/150 models

    $169.00

    $135.20

    $19.99

    $18.99

    $25.99

    $23.39

    GY6 Starter Clutch Nut Tool H4 12V 35/35W HEAVY DUTY HEADLIGHT  BULB GE HARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR)
    GY6 Starter Clutch Nut Tool H4 12V 35/35W HEAVY DUTY HEADLIGHT BULB GEHARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR)

    Starter Clutch Nut Removal Tool, 1/2" Drive x 4 Prong Clutch Tool. Allows you to remove the starter clutch nut from 125cc/150cc/180cc, 4-stroke GY6 engines commonly found in Scooters, ATVs, Carts, Buggies and UTVs.

    H4 12V 35/35W HEAVY DUTY HEADLIGHT BULB GE

    HAVING ISSUES BLEEDING MASTER CYLINDER GET THESE BANJO WASHERS WITH SEAL COMES IN A PAIR WILL NEED 2 SETS IF YOU ARE DOING FRONT BRAKES. ONE SET FOR MASTER CYLINDER ONE SET FOR CALIPER SIDE.

    $23.99

    $21.59

    $14.99

    $14.24

    $2.99

    $2.84

    Honda  fit Brake Lever with BRAKE SWITCH  - BLACK HONDA LOWER RACE FOR STEERING STEM TRIPLE TREE HONDA METROPOLITAN FUEL SENDING UNIT KIT
    Honda fit Brake Lever with BRAKE SWITCH - BLACKHONDA LOWER RACE FOR STEERING STEM TRIPLE TREE HONDA METROPOLITAN FUEL SENDING UNIT KIT

    Universal Fit Brake Lever. In Black. Great for those that want to run no left switch boxes or looking for a matching lever for the NCY front end kits. Comes with brack switch. USA Stainless hardware for clamp with nylock nut for shouldered bolt....

    JUST ORDERED THE NCY TRIPLE TREE DON'T WASTE TIME BEATING THE OLD RACE OUT OF YOUR STOCK FORK SET UP RACE, STEERING CONE (LOWER) 53212-GEE-000

    BRAND NEW Sealed Honda OEM fuel sending unit. Stage6 LCD gauge requires this in order to work properly in Honda Ruckus. Direct bolt in. Comes with new gasket. Parts circled are what kit comes with.

    $14.99

    $13.49

    $8.25

    $8.09

    $51.64

    $49.05

    HONDA OEM  MET COMPLETE GEAR SET 45T HONDA OEM EXHAUST GASKET HONDA OEM RUCKUS DRIVE FACE
    HONDA OEM MET COMPLETE GEAR SET 45T HONDA OEM EXHAUST GASKETHONDA OEM RUCKUS DRIVE FACE

    MET GEAR SET FOR 20% BETTER FINAL GEAR.

    COMES WITH 45T FINAL GEAR

    13T COUNTERSHAFT

    42T COUNTERGEAR.

     

     

     HONDA OEM EXHAUST GASKET. NUMBER 1 IN PIC.

    IN STOCK FREE SHIPPING

    HONDA OEM DRIVE FACE IN STOCK NO WAITING FOR HONDA TO ORDER. WE HAVE THEM IN STOCK

    #2 IN PICTURE

    $112.95

    $105.04

    $7.88

    $6.30

    $27.95

    $25.15

    (1)
    HONDA OEM STYLE  FUEL FILTER 90 TURN HORIZONTAL HONDA RUCKUS / METROPOLITAN AIRBOX ELIMINATOR KIT Type 1 HONDA RUCKUS AIRBOX ELIMINATOR KIT WITH UNI FILTERS Type 2
    HONDA OEM STYLE FUEL FILTER 90 TURN HORIZONTALHONDA RUCKUS / METROPOLITAN AIRBOX ELIMINATOR KIT Type 1HONDA RUCKUS AIRBOX ELIMINATOR KIT WITH UNI FILTERS Type 2

    PERFECT STOCK OEM REPLACEMENT FUEL FILTER

    Another Ruck Shop First. Here it is. Everything you need to eliminate your stock Honda / Metropolitan air box with the most popular parts. When you remove your stock air box you will need to re-jet the carburetor. We recommend you add a...

    Another Ruck Shop First. Here it is. Everything you need to eliminate your stock Honda / Metropolitan air box with the most popular parts. When you remove your stock air box you will need to re-jet the carburetor. We recommend you add a...

    $2.99

    $2.75

    $59.99

    $56.99

    $68.99

    $65.54

    (1)
    HONDA RUCKUS / ZOOMER REAR FLUSH MOUNT LED TAILLIGHT TURTLE HEAD HONDA RUCKUS 10X5 MINI FATTY W/ TIRE BOLT ON.  FREE SHIPPING Honda Ruckus Battery Box nut Clip
    HONDA RUCKUS / ZOOMER REAR FLUSH MOUNT LED TAILLIGHT TURTLE HEADHONDA RUCKUS 10X5 MINI FATTY W/ TIRE BOLT ON. FREE SHIPPINGHonda Ruckus Battery Box nut Clip

    Looking to run a flush taillight that is high and tight. Look no farther. The TRS FLUSH MOUNT LED uses a quality made in the USA Light one of the brightest in the industry.

    Here you go a Douglas polished 10x5 mini fatty wheel with a new 130/90-10 Michelin Bopper installed. Wheel has been fitted with a Kymco Hub bolted and trued. Test ridden once to make sure wheel is correct. NO need to find a tire shop to mount...

    Lost that battery box nut clip. You can't find these at Home Depot. #16 in the picture 

    $82.00

    $73.80

    $289.00

    $260.10

    $2.90

    $2.84

    Honda Ruckus Battery Box Special Screw HONDA RUCKUS OEM CARB CONNECTOR (INSULATOR) HONDA RUCKUS Carbon Fiber Tank cover High end and Thick NCY
    Honda Ruckus Battery Box Special ScrewHONDA RUCKUS OEM CARB CONNECTOR (INSULATOR) HONDA RUCKUS Carbon Fiber Tank cover High end and Thick NCY

    Lost that battery box screw. You can't find these at Home Depot. #14 in the picture 

    IS YOUR CARB CONNECTOR RIPPED OR HAVE A LEAK FROM REMOVING THE CARB OVER AND OVER OR JUST DRY ROTTEN. HERE IS A NEW ONE HONDA OEM NUMBER 6 IN THE DIAGRAM. CONNECTOR BAND ARE NOT INCLUDED.

    This carbon fiber gas tank cover gives the Ruckus a high end and indestructable look. Nice and thick

    $1.99

    $1.89

    $23.05

    $189.99

    $170.99

    HONDA RUCKUS OEM CLUTCH PADS Ruckus GET 49cc Engine Stretch 9.5" Extension w/ brake cable Honda Ruckus Frame Splitter Alumunum Imported Ships Free
    HONDA RUCKUS OEM CLUTCH PADSRuckus GET 49cc Engine Stretch 9.5" Extension w/ brake cable Honda Ruckus Frame Splitter Alumunum Imported Ships Free

    Worn or glazed clutch pads. We have then in stock  Parts included are circled in Picture. Comes 2 pk

    TRS 9.5 Extension kit V2 NOW IN GLOSS BLACK.  FITS ALL NPS-50 2003 And Newer.  Updated version now is TIG welded, with locking design so everything is trued.  EVERY PIECE OF THIS IS MADE IN THE USA, Even the washers. 

    The Honda Ruckus Frame Splitter is an easy way to cover up your coil and fuel pump? . Designed to fit over the fuel tank or its cover, the Frame Splitter really helps cover the rear section of the front sub-frame nicely when compared to the...

    $39.99

    $159.95

    $143.95

    $29.00

    $27.54

    HONDA RUCKUS SOLID FRONT FRAME COVER GUARD BILLET T-6061 HONDA RUCKUS front or Rear Brake Shoes Pads Honda Ruckus GET, GY6, ZUMA   License Plate Mount 12 position
    HONDA RUCKUS SOLID FRONT FRAME COVER GUARD BILLET T-6061 HONDA RUCKUS front or Rear Brake Shoes PadsHonda Ruckus GET, GY6, ZUMA License Plate Mount 12 position

    Removing the OEM front frame plastics can really leave your Honda Ruckus looking bare. Well, TRS comes to the rescue with their Honda Ruckus Front Frame Cover. Cut out of 6061 billet Aluminum not just a cheap plate. These covers are attractive...

    Front or Rear Brake shoes for Honda Ruckus

    OTTO FACTORY GY6 License Plate Mount with all hardware. Can be mounted Vertical or horizontal. Powder Coated in Black with Stainless Hardware. Mounts on the GY6 CVT case and allows you to run your plate 6 different ways. If you like it vertical...

    $64.99

    $58.49

    $17.99

    $16.19

    $38.99

    $35.09

    HONDA RUCKUS IGNITION KEY OEM HONDA RUCKUS KICKSTART RACHET AND WASHER HONDA RUCKUS MET ZOOMER LED LIGHT FLASHER RELAY
    HONDA RUCKUS IGNITION KEY OEMHONDA RUCKUS KICKSTART RACHET AND WASHERHONDA RUCKUS MET ZOOMER LED LIGHT FLASHER RELAY

    HONDA RUCKUS OEM COMPLETE IGNITION. NUMBER 7 IN DIAGRAM. IGNITION AND 2 KEYS

    HONDA RUCKUS KICKSTART RACHET AND WASHER HONDA OEM PARTS

    HONDA RUCKUS LED FLASHER RELAY WITH INSTRUCTIONS AND GROUND ALREADY WIRED. Looking to add LED Blinkers or brake lights to your scooter? You will need either a set of in-line resistors for the circuit or replace the OEM flasher with our LED...

    $80.00

    $72.00

    $11.99

    $11.03

    $13.99

    $12.59

    (1)
    Honda Ruckus Metropolitan Carb Jet kit  38 Idle 78 80 82 85 Main Honda Ruckus Metropolitan Header Exhaust Flange Honda Ruckus Metropolitan REED PAR PAIR Valve Block Off 4 TYPES
    Honda Ruckus Metropolitan Carb Jet kit 38 Idle 78 80 82 85 MainHonda Ruckus Metropolitan Header Exhaust Flange Honda Ruckus Metropolitan REED PAR PAIR Valve Block Off 4 TYPES

    Genuine Keihin jet kit made for the Honda Ruckus / Metropolitan. Jet kit comes with 38 idle and 78,80,82,85 main. You will never need another jet besides these from our experiance. We also sell individual jets too.

    HONDA RUCKUS METROPOLITAN HEADER EXHAUST FLANGE STAINLESS STEEL  FOR A 3/4 o.d. (.75 od) TUBE .  MADE IN USA USE FOR CUSTOM EXHAUST FREE SHIPPING.

    THIS ITEM GET SHIPPED FIRST CLASS MAIL IF ORDERED BY ITSELF.

    If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate....

    $29.99

    $26.99

    $17.99

    $15.29

    $18.99

    $17.09

    (1)
    HONDA RUCKUS MOTO GP EXHAUST FOR GY6 MOTOR FATTY HONDA RUCKUS OEM  NEW COMPLETE SEAT BLACK 03-13 HONDA RUCKUS OEM CLUTCH SPRING
    HONDA RUCKUS MOTO GP EXHAUST FOR GY6 MOTOR FATTY HONDA RUCKUS OEM NEW COMPLETE SEAT BLACK 03-13HONDA RUCKUS OEM CLUTCH SPRING

    Honda Ruckus Moto GP exhaust for Fatty Tire 12X7, 12X8 with GY6 ENGINE SWAP. We have made an GP exhaust like no other. Our TRS exhaust follows the frame of the ruckus and allows you to change you oil. High mounted Header to help with clearence....

    THIS IS A COMPLETE SEAT BRAND NEW OEM. COMES WITH COVER, SEAT, PAD, ALL SCREWS AND HARDWARE. PERFECT FOR SOMEONE DOING A METRUCK.

    COMES WITH PARTS 2,5,12, AND 11 ON DIAGRAM. SEAT IS BLACK

    HONDA RUCKUS OEM CLUTCH SPRING.

    ITEM # 3 IN PICTURE

    SOLD INDIVIDUAL FREE SHIPPING

    $330.00

    $290.39

    $149.99

    $142.49

    $3.95

    Honda Ruckus Side Steps Alumunum Imported, Ships Free Honda Ruckus Stainless GP Exhaust for OEM Motor 49cc 16mm Header Honda Ruckus Stainless Steel Exhaust OEM Motor w/ FATTY Tire v2
    Honda Ruckus Side Steps Alumunum Imported, Ships Free Honda Ruckus Stainless GP Exhaust for OEM Motor 49cc 16mm HeaderHonda Ruckus Stainless Steel Exhaust OEM Motor w/ FATTY Tire v2

     To really set off the look of your Honda Ruckus after removing the OEM Floorboards, you need to use these Honda Ruckus Side Steps. They go hand-in-hand with the Honda Ruckus Frame Splitter.

     Stainless Steel Exhaust for the Honda Ruckus. Head Pipe Bolt Hole Spacing: 45mm Head Pipe Inner Diameter: 25mm Muffler Overall Length: 17 inches Includes Mounting Kit, Premium Gasket (Fit all Honda Ruckus/Zoomer)

    You all asked for a inexpensive Stainless Steel Exhaust for the Honda Ruckus with a OEM 49cc Motor and a Fatty Tire and we got it now. Will Clear 12x8 Wheel and Tire. SHIPS FOR FREE. Head Pipe Bolt Hole Spacing: 45mm Head Pipe Inner Diameter:...

    $29.00

    $26.10

    $199.00

    $189.05

    $275.00

    $261.25

    In-Line Resistor for LED signals 10w 3 OHM Coolbox Coolant Radiator Resevior  Honda Ruckus Zoomer Met KEIHIN RUCKUS MAIN JET CHOOSE SIZE 78 - 85 SHIPS FREE
    In-Line Resistor for LED signals 10w 3 OHMCoolbox Coolant Radiator Resevior Honda Ruckus Zoomer Met KEIHIN RUCKUS MAIN JET CHOOSE SIZE 78 - 85 SHIPS FREE

    Corrects the fast-flash problem when using LED turn signals. Simple splice in installation. Sold in pairs - connectors included. NO NEED TO BUY A LED FLASHER that May or MAY NOT work.

    INSTOCK READY TO SHIP CLEAR COOLANT RESEVOIR TANK FOR HONDA RUCKUS ZOOMER OR METROPOLITAN. COMES IN RAW OR BLACK ANODIZED. MADE IN EUROPE AND IMPORTED. * CNC'd Aluminium caps * Stainless mounting bracket * This product will NOT fit with the stock...

    OEM MAIN JETS for HONDA RUCKUS CHOOSE FROM #78-85 FREE SHIPPING

    VIDEO ON JETTING AND SHIM

    $12.95

    $11.65

    $79.00

    $75.05

    $9.99

    $9.49

    KYMCO HUB FOR HONDA RUCKUS 4/140 BOLT Left Handle Switch to use with CNC levers  V2  FREE SHIPPING Left Handle Switch to use with CNC levers  V3  FREE SHIPPING
    KYMCO HUB FOR HONDA RUCKUS 4/140 BOLT Left Handle Switch to use with CNC levers V2 FREE SHIPPINGLeft Handle Switch to use with CNC levers V3 FREE SHIPPING

    LOOKING TO RUN A FATTY RIM ON A HONDA RUCKUS MOTOR HERE'S THE HUB YOU NEED. WILL REQUIRE YOU TO REMOVE THE STUD AND USE BOLTS TO USE ON AFTERMARKET WHEEL. HUB HAS 4/140 BOLT PATTERN.

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual. 

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual. v3 ALL BLACK BUTTONS...

    $56.00

    $43.68

    $15.00

    $12.00

    $15.99

    $14.39

    Malossi Variator (Performance); Honda Ruckus Zoomer METAL RUBBER COATED REAR BRAKE CABLE HOLDER Michelin Power Pure SC 140/70-12 M/C Tire
    Malossi Variator (Performance); Honda Ruckus ZoomerMETAL RUBBER COATED REAR BRAKE CABLE HOLDERMichelin Power Pure SC 140/70-12 M/C Tire

    Performance Malossi Variator for the Honda Ruckus. Will help eliminate that annoying bog after initial take-off. Multivar is very easy to fit and to modify. It is developed in detail and for specific applications. With a variator that features...

    METAL CLAMP WITH RUBBER COATING TO HOLD REAR BRAKE CABLE SO IT DOES NOT HIT THE LIP OF THE WHEEL. ATTACHES TO CVT AREA. SEE PIC

    Michelin Pilot Power Pure SC REAR Tire World’s first dual compound technology scooter tire (2CT) Increased safety, grip, sportiness and longevity Delivers feedback and grip in all driving conditions Slick central portion puts more rubber on...

    $127.00

    $95.25

    $3.00

    $2.84

    $83.95

    $67.16

    (2)
    Multi Function Pocket Tool Multi Tool with Sockets NCY 12MM X 250MM NEO CHROME FRONT AXLE FOR RUCKUS DISC KITS
    Multi Function Pocket ToolMulti Tool with SocketsNCY 12MM X 250MM NEO CHROME FRONT AXLE FOR RUCKUS DISC KITS

    Aluminum body for lighter weight. Anodized for corrosion protection and great looks. Compact size packs multi function utility. Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and flat head screwdrivers.

    Aluminum body for lighter weight. Anodized for corrosion protection and great looks. Compact size packs multi function utility. Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and flat head screwdrivers.

    TRS 12MMX250MM. Got that RRGS fork kit but no axle. Same axle that comes in the NCY AND TRS Front end Kits. Get it NOW.  Not found in States IMPORTED

    $14.95

    $13.45

    $10.99

    $25.99

    $22.09

    NCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6 NCY TRS CALIPER ADAPTER 2 PISTON CALIPER NCY Exhaust Pipe Nuts (8mm, Sold in Pairs) Gy6 big bore and Grom
    NCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6 NCY TRS CALIPER ADAPTER 2 PISTON CALIPERNCY Exhaust Pipe Nuts (8mm, Sold in Pairs) Gy6 big bore and Grom

    Replacement brake cable for the following Honda Ruckus frame extension kits: 0300-0012 PASSWORD EXTENSION Overall length: 87"

     

    NCY caliper adapter. Looking to run RRGS, DIO or NCY fork but don't want to spend a fortune on Brake set up. This bracket fits on most aftermarket NCY and RRGS forks and allows you run a NCY

     

     

     

    Installing a big valve head on your GY6 or large diameter pipe? These nuts are essential. The smaller, 10mm diameter head allows for extra clearance between your wrench and the pipe for easy access.

    $20.99

    $16.79

    $30.00

    $25.50

    $3.99

    $3.59

    NCY Forged Brake Caliper 2 piston - black NCY Front End Kit  ( Black Fork ) For Honda Ruckus 03-16 NCY Front End Kit, (Titanium Grey) ; Honda Ruckus 03-16
    NCY Forged Brake Caliper 2 piston - black NCY Front End Kit ( Black Fork ) For Honda Ruckus 03-16NCY Front End Kit, (Titanium Grey) ; Honda Ruckus 03-16

    NCY FORGED 2 PISTON FRONT BRAKE CALIPER W/ PADS. YOU WILL NEED BANJO FITTING AND BANJO BOLT.

    NEW STYLE NCY Honda Ruckus / Zoomer Big Brake Kit. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer. Shocks have a high quality titanium grey finish. Includes: Front fork / shock Dual...

    NEW STYLE NCY Honda Ruckus / Zoomer Big Brake Kit. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer. Shocks have a high quality titanium grey finish. Includes: Front fork / shock Dual...

    $107.99

    $91.79

    $519.00

    $467.10

    $519.00

    NCY Performance Brake Pads (Front)  Ruckus Zoomer NCY Performance High Tension Coil and Cap; ZOOMER RUCKUS NCY PERFORMANCE SHOCK BLACK
    NCY Performance Brake Pads (Front) Ruckus Zoomer NCY Performance High Tension Coil and Cap; ZOOMER RUCKUS NCY PERFORMANCE SHOCK BLACK

    Performance NCY front brake pads for Genuine Buddy 50.  The pad compound is long-wearing and ensures the best stopping power for your Buddy.

    These also work with the NCY Honda Ruckus front end kits.

    Two prong high tension coil. Provides solid and consistent spark and increased ignition power. Fits Honda Ruckus and Metropolitan This also includes the spark plug cap!

    High-quality, NCY-built rear performance shock for Honda's Ruckus improves ride, handling, and looks great - this part is sure to improve your Ruckus and finish your custom build in style! Measurements:

    $20.99

    $18.89

    $39.99

    $35.99

    (1)

    $109.00

    $98.10

    NCY Slammed Front End Kit (All Black) for Honda Ruckus 03-16 NCY Slammed Front Forks lower than RRGS NCY UNIVERSAL CNC KEY HEAD  3 COLORS
    NCY Slammed Front End Kit (All Black) for Honda Ruckus 03-16NCY Slammed Front Forks lower than RRGS NCY UNIVERSAL CNC KEY HEAD 3 COLORS

    NCY Slammed Honda Ruckus / Zoomer Front End Kit. MOAR LOW is the name of the game for our newest exclusive NCY FEK. Includes everything you need to complete the front disk big brake conversion on your Honda Ruckus / Zoomer or Metropolitan (with...

     NCY Slammed Honda Ruckus / Zoomer Front End Kit. (THESE ARE NOT THE SAME AS FOUND IN THE SLAMMED FRONT END KIT THEY ARE LOWERED)

    NCY KEY HEAD IN GOLD, RED OR GUN METAL GRAY. NICE LITTLE ADDITION TO YOUR HONDA RUCKUS OR MET.

    NOTE: YOU MUST GRIND OFF TOP OF KEY TO FIT INSIDE SLOT. HAS SET SCREW.

    $699.00

    $629.10

    $199.00

    $189.05

    $14.99

    $12.74

    NCY, Foot Rest Footrest  (white) Ruckus NCY, Foot Rest Footrest (BLACK)  Ruckus NEW VERSION NCY Rear Wheel (black), Honda Ruckus 10 SPOKE
    NCY, Foot Rest Footrest (white) RuckusNCY, Foot Rest Footrest (BLACK) RuckusNEW VERSION NCY Rear Wheel (black), Honda Ruckus 10 SPOKE

    Stiffen up your chassis with the NCY Honda Ruckus / Zoomer Footrest Brace. This kit includes folding foot pegs for a more comfortable ride. This footrest comes painted WHITE. WE GOT THEM IN STOCK 

    Stiffen up your chassis with the NCY Honda Ruckus / Zoomer Footrest Brace. This kit includes folding foot pegs for a more comfortable ride. This footrest comes painted Black.

    JUST RELEASED Rear wheel rim for Honda scooters. This is the matching pair to our NCY Front End Kits for Honda Ruckus, and it has the correct hub for your stock drum brake on the rear wheel. This rear rim from NCY

    $124.99

    $112.49

    $124.99

    $112.49

    $129.99

    $119.59

    NEW VERSION NCY Rear Wheel (Silver), Honda Ruckus 10 SPOKE NO LOGO Ruckus Headlight Frame Lowering Bracket - Weld-on! PARTS BY  MAX 2mm STACKABLE SPACER FOR GY6 HUB
    NEW VERSION NCY Rear Wheel (Silver), Honda Ruckus 10 SPOKE NO LOGO Ruckus Headlight Frame Lowering Bracket - Weld-on!PARTS BY MAX 2mm STACKABLE SPACER FOR GY6 HUB

    JUST RELEASED Rear wheel rim for Honda scooters. This is the matching pair to our NCY Front End Kits for Honda Ruckus, and it has the correct hub for your stock drum brake on the rear wheel. This rear rim from NCY

    Still running stock lights? Well make them look even BETTER by lowering them a bit, and getting them closer to the front wheel, and not looking like they are always sky-high all the time! Bracket comes in raw metal. you must paint or powdercoat yourself

    2mm stackable positive offset spacer for gy6 hub. USE THESE TO CENTER YOUR WHEEL OR TO OFFSET HUB SO AFTERMARKET WHEELS CAN CLEAR AXLE.

    $10 EACH SHIPS FREE 

    $129.99

    $118.29

    $19.99

    $15.99

    $10.00

    $9.00

    Password JDM Ruckus / Zoomer Gas Cap Cover V.1  Red Black or Raw TRS Ruckus Fender Washer Dress-up Kit for Battery Box  3 colors Polini Variator Guides 3 pk
    Password JDM Ruckus / Zoomer Gas Cap Cover V.1 Red Black or RawTRS Ruckus Fender Washer Dress-up Kit for Battery Box 3 colors Polini Variator Guides 3 pk

    Now you can cover up your ugly steel gas cap with the Password:JDM milled aluminum gas cap cover. Our gas cap features a low profile design for the cleanest look possible. Using the included set screws, this cap is virtually impossible for...

    FINALLY! A Battery Box Washer Kit that fits with the right size bolts and washers. Add that last finishing touch to your project with these all new TRS battery box dress up kit! Each kit includes 4 x 5mm washers, 3 x6mm washers and stainless...

    Replace those broken Guides on your Hi-Speed Variator for the ruckus YOUTUBE INSTALL VIDEO

    $37.99

    $24.69

    $15.75

    $14.17

    $5.95

    $5.65

    Polished Douglas 12x8  3+5 4/110 Solid Ruckus Fatty Rim Polished Douglas 12x8  3+5 4/137 Ruckus Fatty Rim RED Label Relay and Starter Solenoid; GY6
    Polished Douglas 12x8 3+5 4/110 Solid Ruckus Fatty RimPolished Douglas 12x8 3+5 4/137 Ruckus Fatty Rim RED LabelRelay and Starter Solenoid; GY6

    Douglas 12x8 3+5 Offset with 4/110 bolt pattern. Our rim comes with a TRS center hub cap to hide axle nut.  WE DON'T use O-rings to hold cap on that fly off. 
    We fully polish the rim because factocy is just not good enough.

    Douglas 12x8 3+5 Offset with 4/137 .190mm 10mm bolt pattern. Polished Rim. Must use an Kymco hub or similar. This wheel is for a GET motor. Customer must have a long stretch kit to clear wheel.

     

    High-quality replacement starter relay (solenoid) for 125 - 150 cc GY6 Chinese scooter engines.

    $189.00

    $179.55

    $138.95

    $132.00

    $10.99

    $9.89

    RRGS / ADELIN 4 PISTON BIG BRAKE KIT 3 COLORS RRGS DRAG FRONT FORKS RUCKUS GY6  BLACK (DISC) SHIPS FREE RUCKSHOP TRS 8 SPOKE POLISHED W/ HUB CAP WHEEL SET V2
    RRGS / ADELIN 4 PISTON BIG BRAKE KIT 3 COLORSRRGS DRAG FRONT FORKS RUCKUS GY6 BLACK (DISC) SHIPS FREERUCKSHOP TRS 8 SPOKE POLISHED W/ HUB CAP WHEEL SET V2

    HAVE YOUR OWN FORKS BUT ARE LOOKING FOR 4 PISTON BRAKES. RRGS OR ADELIN (WHATEVER WE HAVE IN STOCK) CALIPER BRACKET,220MM FLOATING ROTOR, TITANIUM ROTOR BOLTS , 4 PISTON ADELIN CALIPER W/ PADS (BLACK, SILVER, OR RED)

    RRGS Ruckus Low Down Front Forks The RRGS Drag Forks measure 3" shorter then the normal ncy, atr, rrgs and its about 1" shorter then the KN Low Down Forks. Custom drag forks are great for lowering your scooter without cutting springs and...

    THE RUCK SHOP SPOKE WHEEL SET FRONT 12X4 4X90 BOLT PATTER REAR 12X8 3+5 OFFSET 4/110 BOLT PATTERN FULLY POLISHED ON MACHINE (WE POLISH THEM FACTORY POLISH JOB IS NOT GOOD ENOUGH) LIMITED QUANITIES AVAILABLE.

    $260.00

    $208.00

    $225.00

    $202.50

    $650.00

    $552.50

    Ruckus High Performance Contra Spring RUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA Single Light: Black LED 60mm Anti-Vibe Post Mount  FREE SHIPPING
    Ruckus High Performance Contra SpringRUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA Single Light: Black LED 60mm Anti-Vibe Post Mount FREE SHIPPING

    INSIDE DIAMETER = 50.0, LENGTH = 90mm, +30% STIFFER THAN STOCK. Variator springs. An under estimated part of optimal variator adjustment is the variator back pressure spring. (Torque Spring) This spring puts back pressure on the back converter...

    TIRED OF ROCKING THAT LONG FRONT BRAKE CABLE WHEN YOU LOWER YOUR SHOCK FORKS? WE FIXED THAT. CUSTOM MADE FOR THE RUCK SHOP 39 INCH SHORT FRONT BRAKE CABLE TRUE 39 INCES.

     

    Black LED Light with anti-vibe post mount (replacement light for Trail Tech brackets, does not include rubber grommet.) use this the Composimo LED mount Feature Description Brightness Modes 3 (Hi - Med - Lo) Brightness 1050 Lumens (Hi mode) Beam...

    $14.99

    $13.49

    $30.99

    $27.89

    $99.99

    $89.99

    Split Braided Wire Loom CLEAN CUT 1/2 OR 3/4 INCH STAINLESS STEEL HONDA  RUCKUS ZOOMER  TANK COVER THE RUCK SHOP / I RUCK ON THE FIRST DATE key fob
    Split Braided Wire Loom CLEAN CUT 1/2 OR 3/4 INCHSTAINLESS STEEL HONDA RUCKUS ZOOMER TANK COVERTHE RUCK SHOP / I RUCK ON THE FIRST DATE key fob

    3/4 INCH Split Braided Wire Loom CLEAN CUT 5 foot section Our unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open...

    STAINLESS STEEL TANK COVER FOR USE WHEN YOU REMOVE YOUR TANK COVER PERFECT FOR POWDER COATING. IMPORTED FROM JAPAN. FREE SHIPPING *Front has a lip that can be cut, we use Seat Frame washers

    THE RUCK SHOP KEY FOB ONE SIDE SAYS: I RUCK ON THE FIRST DATE OTHER SIDE : THERUCKSHOP.COM PERFECT FOR YOUR RUCKUS OR MET KEYS. COMES IN BLACK, RED, OR PINK

    $9.99

    $9.49

    $79.00

    $63.20

    $2.99

    $2.69

    TRAILTECH VAPOR SPEEDO CABLE FOR DISC BRAKE TRS Sidewinder Headlight Bracket and 60mm LED Trailtech light TRS 4/140  RUCKUS KYMCO HUB COVER CENTER CAP MILLED or ROUND
    TRAILTECH VAPOR SPEEDO CABLE FOR DISC BRAKETRS Sidewinder Headlight Bracket and 60mm LED Trailtech lightTRS 4/140 RUCKUS KYMCO HUB COVER CENTER CAP MILLED or ROUND

    THIS CABLE MAKE INSTALLATION CLEAN. WILL REQUIRE YOU TO DRILL AND TAPE YOUR BRAKE CALIPER MOUNT AND GLUE MAGNET TO ROTOR. WILL NEED USUALLY ONLY FOR SINGLE PISTON CALIPER LIKE ON NCY FRONT KIT IF YOU HAVE A RRGS DUAL PISTON CALIPER YOU WILL NOT...

    Looking to mount a single Trailtech LED headlight to your Ruckus forks, but you're too low? This is THE setup you NEED! It allows the best mounting of the Trailtech LED headlight on your Honda Ruckus no matter how low you are! The mount is...

    Looking to cover that ugly Kymco Hub. Look no further The Ruck Shop has you covered. 6160 CNC Billet hub cover 4/140 bolt pattern. Comes with 4 M8x1.25 stainless bolts. Will work on 4/137 4/136 and 4/144 wheels. Customer may need to open holes on...

    $29.95

    $150.00

    $135.00

    $59.00

    $53.10

    TRS 407'S 2 PIECE 12X5 REAR WHEEL RUCKUS HUB INCLIDED TRS 6MM CNC FENDER WASHERS WITH BOLTS - GOLD AND RED ONLY TRS 727'S FULLY CNC 2 PIECE WHEEL FRONT & REAR SET SHIPS FREE!
    TRS 407'S 2 PIECE 12X5 REAR WHEEL RUCKUS HUB INCLIDED TRS 6MM CNC FENDER WASHERS WITH BOLTS - GOLD AND RED ONLYTRS 727'S FULLY CNC 2 PIECE WHEEL FRONT & REAR SET SHIPS FREE!

    TRS 2 PIECE 12X5 3+2 OFFSET WITH 4/140 BOLT PATTERN. PERFECT FOR THE RUCKUS MOTOR. FREE KYMCO REAR HUB  INCLUDED HAS HUB CAP TO CLEAR AXLE AND NUT ON HUB. CAP IS ATTACHED WITH BOLTS FROM THE REAR NOT AN O-RING.

    The TRS Fender Washer Kits include (5) 6Mx20 stainless steel bolts and 5 washers. The fender washers will fit any 10mm bolt hole under the hood of your Honda or Ruckus. The 6Mx20 bolts is recommended for all parts under your hood such as...

    THE RUCK SHOP TRS 727'S CUSTOM BILLET roll forged 6061 heat treated aircraft grade aluminum wheels.
    2 PIECE SERIES HIGH POLISHED CENTERS

    $499.00

    $424.15

    $15.00

    $12.00

    $999.00

    $799.20

    TRS 863'S FULLY CNC 2 PIECE WHEEL FRONT & REAR SET SHIPS FREE! TRS 9 TO NOON LICENSE PLATE FRAME CNC  6061 ALUMINUM TRS 954'S 2 PIECE 12X8 REAR WHEEL RUCKUS 4/140 HUB INCLUDED
    TRS 863'S FULLY CNC 2 PIECE WHEEL FRONT & REAR SET SHIPS FREE!TRS 9 TO NOON LICENSE PLATE FRAME CNC 6061 ALUMINUM TRS 954'S 2 PIECE 12X8 REAR WHEEL RUCKUS 4/140 HUB INCLUDED

     THE RUCK SHOP TRS 863'S CUSTOM BILLET roll forged 6061 heat treated aircraft grade aluminum wheels.

    NO PILL IS NEEDED TO GET YOUR PLATE STANDING UP. IT GOES FROM NINE TO NOON WITH EASY. ALL JOKES ASIDE. IF YOU WANT TO RUN YOU PLATE VERTICAL OR HORIZONTAL ALL YOU DO IS REMOVE THE 2 LITTLE BOLTS AND REPOSITION, EASY AS THAT. COMES WITH ALL...

    TRS 2 PIECE 12X8 3+5 OFFSET WITH 4/140 BOLT PATTERN. PERFECT FOR THE RUCKUS MOTOR.  HAVE A FATTY MOUNT KIT SUCH OUR TRS FATTY MOUNT KIT COMES WITH KYMCO HUB INCLUDED

    $999.00

    $799.20

    $49.00

    $44.10

    $499.00

    $424.15

    TRS ALL IN ONE GY6 MANIFOLD RISER ANGLED CLOCKING FLANGE 56MM V2 TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS TRS BATTERY BOX FUEL / LIGHT BLOCK OFF BLACK OR RAW
    TRS ALL IN ONE GY6 MANIFOLD RISER ANGLED CLOCKING FLANGE 56MM V2TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS TRS BATTERY BOX FUEL / LIGHT BLOCK OFF BLACK OR RAW

    The GY6 Intake Manifold Riser and angled clock flange all in one is here! V2 NOW COMES IN 30MM JUST IN CASE YOU WANT TO RUN BIG BORE HEAD No more 2 piece setups that need a gasket to seal. This Intake Manifold Riser can help you get a better fitment!

    RRGS / NCY FRONT HUB SPACER KIT THIS KIT IS TO CENTER WHEEL FOR AFTERMARKET FRONT HUB NORMALLY USED WITH DOUGLAS, TRS, OR OTHER RUCKS WHEELS. YOU MAY HAVE TO ADD (USING WASHER) OR REMOVE (FILE) A COUPLE THOUSANTH OFF THE SPACER AS WE HAVE NO...

    NOT USING THE FUEL OR HIGH BEAM LIGHT FOR GY6 SWAPS? TRS HAS INTRODUCED THE SOLUTION. YOU NEED THE PLASTIC LED HIGH BEAM / FUEL LIGHT TO KEEP THE RIDGIDNESS FOR THE BATTERY BOX, THIS IS WHY MANY GY6 SWAPS HAVE BROKEN BOX TABS BECAUSE THEY REMOVE...

    $64.99

    $59.79

    $19.99

    $18.79

    $39.99

    $33.99

    TRS BATTERY BOX FUEL / LIGHT BLOCK OFF W/ START BUTTON SWITCH TRS Billet Aluminum Frame Caps Plugs  - 11 Styles ON SALE NOW TRS BILLET CNC HONDA RUCKUS METROPOLITAN BRAKE LEVERS V2
    TRS BATTERY BOX FUEL / LIGHT BLOCK OFF W/ START BUTTON SWITCHTRS Billet Aluminum Frame Caps Plugs - 11 Styles ON SALE NOWTRS BILLET CNC HONDA RUCKUS METROPOLITAN BRAKE LEVERS V2

    LOOKING FOR A CLEAN PLACE FOR A START BUTTON? TRS HAS INTRODUCED THE SOLUTION. YOU NEED THE PLASTIC LED HIGH BEAM / FUEL LIGHT TO KEEP THE RIDGIDNESS FOR THE BATTERY BOX, THIS IS WHY MANY GY6 SWAPS HAVE BROKEN BOX TABS BECAUSE THEY REMOVE THIS...

    Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly...

    HAVE DRUM BRAKES? WANT THAT CUSTOM LOOK. WE GOT YOU COVERED. BILLET 6160 SHORT LEVERS FOR THE HONDA RUCKUS / ZOOMER / METROPOLITAN. ALLOWS THE USE OF BRAKE LOCK AND BOTH SWITCHES. RAW OR ANODIZED BLACK INTRODUCTION PRICED AND FREE SHIPPING.

    $49.99

    $44.99

    $28.00

    $22.40

    $69.99

    $55.99

    TRS CNC ALUMINUM RUCKUS ZOOMER CVT COVER ANKLEBITER  3 COLORS TRS DOUGLAS HONDA RUCKUS 12X4 SOLID FRONT RIM HIGH POLISHED TRS DRAG LOW DOWN  FRONT FORKS RUCKUS ( RRGS GY6) 2 COLORS
    TRS CNC ALUMINUM RUCKUS ZOOMER CVT COVER ANKLEBITER 3 COLORSTRS DOUGLAS HONDA RUCKUS 12X4 SOLID FRONT RIM HIGH POLISHED TRS DRAG LOW DOWN FRONT FORKS RUCKUS ( RRGS GY6) 2 COLORS

    The GET Open CVT Drive Cover aka AnkleBiter Want the look of the a GY6 ? Is your clutch always running hot and slipping . Helps prolong life of belt and Clutch pads since heat is released. No problems running in rain. This Drive cover is CNC...

    TRS CUSTOM SOLID HIGHLY POLISHED roll forged 6061 heat treated aircraft grade aluminum wheels. Specification : Width 12"x4" .190 thick, 6061 heat treated aircraft grade aluminum 4x90 patternpolished finish (We high speed polish to get a even...

    TRS Ruckus Low Down Front Forks The TRS Drag Forks measure 3" shorter then the normal ncy, atr, rrgs and its about 1" shorter then the KN Low Down Forks. Custom drag forks are great for lowering your scooter without cutting springs and...

    $89.99

    $83.69

    $195.00

    $225.00

    $191.25

    TRS FORWARD FOOTREST PEG LEGS FOR  HONDA RUCKUS MADE IN USA TRS Frame Extension Mount for Fatty Rim using Stock Ruckus Motor TRS Front Wheel Hub Adapter Gy6 brake pattern IMPROVED DESIGN V2
    TRS FORWARD FOOTREST PEG LEGS FOR HONDA RUCKUS MADE IN USATRS Frame Extension Mount for Fatty Rim using Stock Ruckus MotorTRS Front Wheel Hub Adapter Gy6 brake pattern IMPROVED DESIGN V2

    The TRS FORWARD FOOTREST is a great addition to your ruckus for that extra leg room. Great for riders who are taller or want another leg position. Attaches to side of frame.

    Ruckus GET FATTY FOR 8" WHEEL conversion mount. Allows you to run the 12x8, OR 10x8 Fatty rim. Our mount is a SOLID piece of BILLET ALUMINUM so it's super strong. 

     

    Finally ready to ship. Wheel adapter to fit Hub. Made to fit common GY6 brake pattern. Made in USA. Comes with Stainless bolts to attached to adapter and 3 titanium finished bolts for rotor attachment. NO WASHER NEEDED.

    $65.00

    (1)

    $399.00

    $379.04

    $56.99

    $45.59

    TRS FUEL  HOSE LINE 3/16" X 3 FT LONG SECTION TRS GY6 150cc Aluminum Spacer Gasket  for Stroker Cranks TRS GY6 Extension Mount Kit - Fatty GY6 SOLID 12X8 10X8 OR 12X7
    TRS FUEL HOSE LINE 3/16" X 3 FT LONG SECTION TRS GY6 150cc Aluminum Spacer Gasket for Stroker Cranks TRS GY6 Extension Mount Kit - Fatty GY6 SOLID 12X8 10X8 OR 12X7

     3/16" FUEL LINE 3 FT LONG Transparent Polyurethane Fuel Line

    TRS Line is a premium polyurethane , 85 durometer, which provides for superior abrasion, kink, tear, oxidation and chemical resistance.

    LIGHT BLUE TRANSPARENT

    TRS 2.2mm, 7.9mm or 8.2mm Stroker Crankshaft Spacer for 54mm stud A-Case Cylinder Stud Spacing which is the motor we sell and most common. Use the 2.2mm for the NCY 2.2 or 2.5 stroker crank and 7.9 or 8.2mm for 8.2 crank. Remember you have head...

    Ruckus gy6 conversion mount. Allows you to run the 12x 7, 12x8 or 10x8 Fatty rim. Comes with clocking flange. Carb must face forward. If you want to go back to GET motor all you have to do is purchase a new lower part. LOOKING FOR EXTENDED BRAKE...

    $9.99

    $8.99

    $27.99

    $25.19

    $399.00

    $379.04

    (2)
    121 - 240 of 266 items