RUCKUS GY6 SWAP PARTS

Here are all the parts you need for a gy6 swap basic swap. You will see some parts like wire harness and hubs that you have options. Pick whats available. Not one is better than the other. All GY6 fatty exhaust are listed below . For wheels and tire we put the wheels that we sell Rears only we do have sets as well but are found under WHEEL / RIMS SECTION

 
1 - 35 of 35 items
Lowboy low down Shock Chrome Spring Adjustable Ruckus & GY6 Michelin Power Pure SC 110/70-12 FRONT Tire TRS GY6 Extension Mount Kit - Fatty GY6 SOLID 12X8 10X8 OR 12X7
Lowboy low down Shock Chrome Spring Adjustable Ruckus & GY6 Michelin Power Pure SC 110/70-12 FRONT Tire TRS GY6 Extension Mount Kit - Fatty GY6 SOLID 12X8 10X8 OR 12X7

Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this Black Shock and Chrome Spring Shock

Michelin Pilot Power Pure SC FRONT Tire World’s first dual compound technology scooter tire (2CT) Increased safety, grip, sportiness and longevity Delivers feedback and grip in all driving conditions Slick central portion puts more rubber on...

Ruckus gy6 conversion mount. Allows you to run the 12x 7, 12x8 or 10x8 Fatty rim. Comes with clocking flange. Carb must face forward. If you want to go back to GET motor all you have to do is purchase a new lower part. LOOKING FOR EXTENDED BRAKE...

$159.00

$119.25

$79.95

$67.16

$399.00

$339.15

(2)
YOSHIMURA FATTY CARBON EXHAUST FOR 4 VALVE GY6 205cc - 232cc 150cc 4 Stroke Long Case GY6 Motor Engine 11 pole SHIPS FREE 150cc 4 Stroke Long Case GY6 Motor Engine 8 pole SHIPS FREE
YOSHIMURA FATTY CARBON EXHAUST FOR 4 VALVE GY6 205cc - 232cc 150cc 4 Stroke Long Case GY6 Motor Engine 11 pole SHIPS FREE150cc 4 Stroke Long Case GY6 Motor Engine 8 pole SHIPS FREE

Custom Genuine Yoshimura Exhaust for 4 Valve TAIDA or HOCA head and +8.2 stroker Crank. 205cc or 232cc. Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL bracket for Fatty

150cc 4-Stroke Long-Case GY6 Gas Engine with automatic CVT transmission. This scooter engine is used in a wide variety of applications, including full-size street legal scooters, all terrain vehicles (ATVs), dirt bikes, and go karts. Compatible...

150cc 4-Stroke Long-Case GY6 Gas Engine with automatic CVT transmission. This scooter engine is used in a wide variety of applications, including full-size street legal scooters, all terrain vehicles (ATVs), dirt bikes, and go karts. Compatible...

$475.00

$449.00

$426.54

(2)

$359.00

$323.10

(1)
Lowboy low down Shock Chrome Adjustable Ruckus & GY6 230mm Lowboy low down Short Shock BlK Adjustable for Ruckus & GY6 NCY ATR RUCKUS GY6 ENGINE SWAP HARNESS WITH EXTRAS
Lowboy low down Shock Chrome Adjustable Ruckus & GY6 230mm Lowboy low down Short Shock BlK Adjustable for Ruckus & GY6 NCY ATR RUCKUS GY6 ENGINE SWAP HARNESS WITH EXTRAS

Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this Aluminum and Chrome Spring Shock

Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this black on black rear shock. Top=Eye Bottom=Clevis 235mm, eye to clevis See difference in picture compared to NCY shock

ATR plug and play GY6 engine harness will eliminate the need to fuzz around with wiring your engine swaps! Reduce the chances of errors and problems. Pre-labeled and ready to go! COMES WITH CDI TOO Please take a look at the drop-down menus for...

$159.00

$130.49

$125.00

$93.75

$175.00

$166.25

(1)
DANMAXX GY6 ENGINE SWAP HARNESS W/ CDI , RELAY, COIL , REC. DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 Blk or Raw TRS  Mikuni DF-44 Fuel Pump & GY6 Coil Bracket COIL NOW INCLUDED
DANMAXX GY6 ENGINE SWAP HARNESS W/ CDI , RELAY, COIL , REC.DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 Blk or Raw TRS Mikuni DF-44 Fuel Pump & GY6 Coil Bracket COIL NOW INCLUDED

Parts Shop MAX Honda Ruckus 150cc GY6 motor swap harnes with CDI , COIL , RECTIFIER, AND STARTER RELAY WHEN BOUGHT THROUGH THE RUCK SHOP. MAX GY6 Ruckus Wire Harness Features: ~ Made for GY6 motor with stock or aftermarket controls ~ More...

Dual Pattern, 4 lug 4 inch lug spacing, four 12mm x 1.25 thread studs, for use with golf cart wheels OR 4x110 ATV pattern M10mmX 1.5MM For use with wheels measuring 3 inch back spacing and 4 or 5 inch front spacing 10 or 12 inch dimeter is OK....

A GREAT answer as to where to put that ugly coil! Mount it down out of the way with your fuel pump, and hide them! This clever mount is designed to use the 2-bolt type coils, along with the popular Mikuni DF-44 Fuel Pump! With this bracket you...

$175.00

$148.75

$150.00

$142.50

$49.00

$44.10

GENUINE MIKUNI FUEL PUMP FOR GY6 SWAP MADE IN JAPAN TRS  Mikuni DF-44 Fuel Pump Bracket in Raw or Black GY6 150  SHORT AXLE FOR FATTY MOD Taiwan made not chinese
GENUINE MIKUNI FUEL PUMP FOR GY6 SWAP MADE IN JAPANTRS Mikuni DF-44 Fuel Pump Bracket in Raw or Black GY6 150 SHORT AXLE FOR FATTY MOD Taiwan made not chinese

Mikuni Pulse Fuel Pumps employ an engine’s fluctuation in crankcase pressure to pump fuel from a remote fuel tank to an engine’s carburetor Rectangular fuel pump with 1 outlet for a single carburetor

 

Looking for a stylish way to mount your Mikuni DF-44 Rectangular fuel pump? This is IT!

Available in Raw or Anodized

The Ruck Shop's Very Own. Short Axle used when installing a Fatty Tire/Rim combo with 12x8 or 10x8 rims on your GY6 Ruckus Swap. This is needed so your axle doesn't stick out like you are riding a Roman Chariot.

 

$29.99

$28.49

$25.00

$22.50

$29.99

$20.99

Final Drive Case Gasket (rear); GY6 FREE SHIPPING NCY NEOCHROME TITANIUM REAR AXLE NUT/ GY6 GY6 WHEEL FLANGED REAR WHEEL AXLE  NUT
Final Drive Case Gasket (rear); GY6 FREE SHIPPINGNCY NEOCHROME TITANIUM REAR AXLE NUT/ GY6GY6 WHEEL FLANGED REAR WHEEL AXLE NUT

Transmission cover gasket on GY6 125 - 150cc engines

High quality neochrome rear axle nut by NCY for GY6 engines. Brand: NCY Specs: M16x1.5P Fits: GY6 Engines

GY6 WHEEL FLANGED REAR WHEEL NUT FOR GY6 125CC AND 150CC MOTORS

$5.99

$4.79

$8.99

$8.09

$3.99

$3.59

SHINKO 140/70-12 SR007 TIRE Michelin Power Pure SC 140/70-12 M/C Tire AM63 AVON VIPER STRYKE 140/70-12 Tire
SHINKO 140/70-12 SR007 TIRE Michelin Power Pure SC 140/70-12 M/C Tire AM63 AVON VIPER STRYKE 140/70-12 Tire

SHINKO SR007 140/70-12. perfect tire for your 12x8 rim*

Tubeless 4-Ply Rating
DOT Approved
P Speed rating (93 mph)

**May need straps and lots of air pressure to get tire to seat 12x8.  Rim not included

Michelin Pilot Power Pure SC REAR Tire World’s first dual compound technology scooter tire (2CT) Increased safety, grip, sportiness and longevity Delivers feedback and grip in all driving conditions Slick central portion puts more rubber on...

AM63 AVON VIPER STRYKE 140/70-12. perfect tire for your 12x8 rim*

**May need straps and lots of air pressure to get tire to seat 12x8.  Rim not included

$49.99

$47.49

$83.95

$67.16

(2)

$59.00

$56.05

Exhaust studs for GY6 150cc and  Honda 49cc engine M6 Exhaust Cap Nuts for GY6 150cc 125cc QMB139 & Honda 49cc engine GY6 125-150cc Carburetor 24mm
Exhaust studs for GY6 150cc and Honda 49cc engine M6Exhaust Cap Nuts for GY6 150cc 125cc QMB139 & Honda 49cc engineGY6 125-150cc Carburetor 24mm

Exhaust studs for GY6 150cc/125cc,QMB139, & Honda 50cc engines . M6 can be used on both 49cc and 150cc gy6 . HONDA 49cc use 6mm and most stock gy6 use 6mm as well. Big Bore Heads usually use M8.

Exhaust Cap Nuts for GY6 150cc/125cc and QMB139 50cc engines.

24mm Intake
 Air Filter Mount (outer diameter): 41.75mm
 Electric Choke
 Polished finish
Float drain is located on the float bowl

$1.99

$1.79

$1.99

$1.79

$49.99

$44.99

Uni Filter Clamp-On Dual Layer Pod Air Filter ID 1.75 STRAIGHT 75" Throttle Cable for CVK Carb on Ruckus or GY6 w/ adjuster USA NCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6
Uni Filter Clamp-On Dual Layer Pod Air Filter ID 1.75 STRAIGHT75" Throttle Cable for CVK Carb on Ruckus or GY6 w/ adjuster USANCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6

Straight
    Urethane Flange
    Inner Diameter: 1 3/4 inches
    Outer Diameter: 3½ inches
    Overall Length: 4.6 inches

Throttle cable with a 76" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb. This is the most popular cable lenght used for Honda

Replacement brake cable for the following Honda Ruckus frame extension kits: 0300-0012 PASSWORD EXTENSION Overall length: 87"

 

$18.00

$16.20

$22.00

$20.90

$20.99

$16.79

Polished Douglas 12x8  3+5 4/110 Solid Ruckus Fatty Rim RUCKSHOP OLDSCHOOL POLISHED REAR WHEEL W/ HUB CAP HONDA RUCKUS MOTO GP EXHAUST FOR GY6 MOTOR FATTY
Polished Douglas 12x8 3+5 4/110 Solid Ruckus Fatty RimRUCKSHOP OLDSCHOOL POLISHED REAR WHEEL W/ HUB CAPHONDA RUCKUS MOTO GP EXHAUST FOR GY6 MOTOR FATTY

Douglas 12x8 3+5 Offset with 4/110 bolt pattern. Our rim comes with a TRS center hub cap to hide axle nut.  WE DON'T use O-rings to hold cap on that fly off. 
We fully polish the rim because factocy is just not good enough.

THE RUCK SHOP OLDSCHOOL  REAR 12X8 3+5 OFFSET 4/110 BOLT PATTERN FULLY POLISHED ON MACHINE (WE POLISH THEM FACTORY POLISH JOB IS NOT GOOD ENOUGH) LIMITED QUANITIES AVAILABLE.

Honda Ruckus Moto GP exhaust for Fatty Tire 12X7, 12X8 with GY6 ENGINE SWAP. We have made an GP exhaust like no other. Our TRS exhaust follows the frame of the ruckus and allows you to change you oil. High mounted Header to help with clearence....

$189.00

$179.55

$299.00

$269.10

$330.00

$290.39

YOSHIMURA CARBON GY6 CUSTOM FATTY EXHAUST V2  FREE SHIP YOSHIMURA CARBON RS-9 FULL CARBON V2 EXHAUST FOR GY6 YOSHIMURA CARBON RS-9 STAINESS/ CARBON CAP EXHAUST FOR GY6 V3
YOSHIMURA CARBON GY6 CUSTOM FATTY EXHAUST V2 FREE SHIP YOSHIMURA CARBON RS-9 FULL CARBON V2 EXHAUST FOR GY6YOSHIMURA CARBON RS-9 STAINESS/ CARBON CAP EXHAUST FOR GY6 V3

Custom GY6 Genuine Yoshimura Exhaust with Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL bracket for Fatty 12x7 or 12x8 tire. Comes with all mounting hardware and exhaust plug.

TRS Custom GY6 Genuine Yoshimura RS-9 FULL CARBON Exhaust with Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL bracket for Fatty 10 inch 12x7, 12x8 or 13" tire. Comes with all mounting...

TRS Custom GY6 Genuine Yoshimura RS-9 STAINLESS WITH CARBON CAP Exhaust with Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL

$429.99

$386.99

$575.00

$546.25

$489.00

$440.10

YOSHIMURA STAINLESS TRS COMP SERIES GY6 FATTY CUSTOM EXHAUST Allen Socket Exhaust studs for GY6  & Honda 49cc engine M8 M6
YOSHIMURA STAINLESS TRS COMP SERIES GY6 FATTY CUSTOM EXHAUST Allen Socket Exhaust studs for GY6 & Honda 49cc engine M8 M6

Tired of same ol' stuff get our Custom GY6 Genuine Yoshimura TRS COMP SERIES Stainless Exhaust with Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL bracket for Fatty 12x7 or 12x8 tire.

Exhaust stud with Allen head no need to double nut these. Insert with allen or hex head and use loctite. Super strong perfect for those big bore kits. Use M6 for Honda Ruckus 49cc.

$429.99

$365.49

$3.50

$3.32

1 - 35 of 35 items