GY6 150cc

 
     
    1 - 254 of 254 items
    Genuine Keihin PWK 28mm Carbruretor Made in Japan Genuine OKO BLACK EDITION 28 or 30mm GY6 slide Carb PWK Tawian RRGS 4 Pot  Piston PH80 Brake Caliper
    Genuine Keihin PWK 28mm Carbruretor Made in Japan Genuine OKO BLACK EDITION 28 or 30mm GY6 slide Carb PWK Tawian RRGS 4 Pot Piston PH80 Brake Caliper

    Looking for the Originator. This is it. Straight from Japan. Keihin PWK 28mm Carb. This is the carb everyone is using on GY6 swaps on their ruckus. Great for your 170cc-200cc GY6 motor. Suggested settings: Run air screw all the way in then back...

    BLACK EDITION This is the carb everyone is using on GY6 swaps on their ruckus. Great for your 170cc-200cc GY6 motor. Suggested settings: Run air screw all the way in then back out 1/2 turn.

    FAMOUS RRGS BRAKE CALIPER. THESE HAVE BEEN SOLD OUT FOR ALMOST 1 YEAR. WE HAVE ONLY A FEW. GET THEM WHILE YOU CAN. BLACK ONLY

    $245.95

    $99.01

    $94.05

    $199.00

    $169.15

    TRAILTECH VAPOR HANDLEBAR STEM WORKS ON TRS OR PASSWORD JDM 150cc 4 Stroke Long Case GY6 Motor Engine 8 pole SHIPS FREE 232cc 4-Stroke Long-Case GY6 TAIDA RACE Engine motor
    TRAILTECH VAPOR HANDLEBAR STEM WORKS ON TRS OR PASSWORD JDM 150cc 4 Stroke Long Case GY6 Motor Engine 8 pole SHIPS FREE232cc 4-Stroke Long-Case GY6 TAIDA RACE Engine motor

    TRS Trailtech Vapor Handlebar Stem is made from 6061 and Hard Anodized. Fits all Existing TRS stems. Comes either Complete or face and Cup. FEATURES: 15 degree angle for easy viewing of LCD Works on all TRS stems

    150cc 4-Stroke Long-Case GY6 Gas Engine with automatic CVT transmission. This scooter engine is used in a wide variety of applications, including full-size street legal scooters, all terrain vehicles (ATVs), dirt bikes, and go karts. Compatible...

    DB racing and TRS have teamed up to build some of the baddest GY6 232 Engines around. We use all brand new hand selected hardware and parts for our 232cc motor builds. All of our motor builds are based off of 93 oct pump gas with a estiamate 21 HP....

    $125.00

    $115.00

    $359.00

    $323.10

    (1)

    $3,200.00

    $3,040.00

    3/16" Inline Fuel Filter - Opaque 32MM MANIFOLD FOR MIKUNI TM32-1 CARB 7/8'' Universal 3 function Horn, Turn and light switch
    3/16" Inline Fuel Filter - Opaque32MM MANIFOLD FOR MIKUNI TM32-1 CARB 7/8'' Universal 3 function Horn, Turn and light switch

    3/16" In-Line Fuel Filter with New & Improved Case for more durable design. Used on Scooters, Motorcycles, ATVs, Dirt Bikes, Go-Karts, Dune Buggies and much more. Body Diameter: 22mm Hose End Diameter: 6.8mm (1/4 Inch)

     RDR  OKO 32mm Performance Intake Manifold for 150cc and 125cc GY6 4-stroke QMJ152/157 QMI152/157 engines. This is used for TM-32 carb for the 232cc Taida motors 

    This Switch is Small in size does not take up much room on your bars, It can be easily mounted over your existing clutch lever perch to save space. It is Lightweight perfect with other accessories as it is compact the width is 3/8 Inches only!...

    $0.99

    $0.97

    $42.99

    $38.69

    $10.99

    $10.44

    75" Throttle Cable for CVK Carb on Ruckus or GY6 w/ adjuster USA ADELIN 4 POT REPLACEMENT BRAKE PAD SET PADS Allen Socket Exhaust studs for GY6  & Honda 49cc engine M8 M6
    75" Throttle Cable for CVK Carb on Ruckus or GY6 w/ adjuster USAADELIN 4 POT REPLACEMENT BRAKE PAD SET PADSAllen Socket Exhaust studs for GY6 & Honda 49cc engine M8 M6

    Throttle cable with a 76" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb. This is the most popular cable lenght used for Honda

    REPLACEMENT BRAKE PADS FOR THE 4 POT ADELIN CALIPER.

    Exhaust stud with Allen head no need to double nut these. Insert with allen or hex head and use loctite. Super strong perfect for those big bore kits. Use M6 for Honda Ruckus 49cc.

    $22.00

    $20.90

    $14.99

    $13.79

    $3.50

    $3.32

    BULLOCK RACING EXTENDED FLOAT BOWL FOR 32MM MIKUNI CARB CNC Billet  levers for Disc / Disc Brake DUAL MASTER BLK OR SIL CNC Billet lever for Disc Rear Brake LEFT SIDE ONLY BLACK
    BULLOCK RACING EXTENDED FLOAT BOWL FOR 32MM MIKUNI CARBCNC Billet levers for Disc / Disc Brake DUAL MASTER BLK OR SIL CNC Billet lever for Disc Rear Brake LEFT SIDE ONLY BLACK

    BULLOCK RACING AND TRS HAS TEAMED UP AND MADE A FLOAT BOWL FOR THE 32MM TM MIKUNI CARB . This bowl eliminates fuel starvation on big cc GY6 motors such as our race built 232cc motors. YOUTUBE INSTALLATION VIDEO

    CNC Billet control CRG Style Top Quality with DUAL MASTER CYLINDERS for DISC FRONT AND REAR BRAKE WITH BRAKE SIGNAL SWITCHES.  SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN

    CNC Billet control CRG Style Top Quality with DUAL MASTER CYLINDERS for DISC FRONT AND REAR BRAKE WITH BRAKE SIGNAL SWITCHES.  SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN

    $125.00

    $118.75

    $169.00

    $160.54

    $87.50

    $78.75

    DC 12V LED Digital Display Voltmeter Waterproof BLUE Dedicated Shorai Litium Battery LFX Charger DIRECT IGNITION HOLDER FOR 4 VALVE GY6 HEAD
    DC 12V LED Digital Display Voltmeter Waterproof BLUE Dedicated Shorai Litium Battery LFX ChargerDIRECT IGNITION HOLDER FOR 4 VALVE GY6 HEAD

    Got a GY6 and ever wonder if the battery is charging. Don't get caught stranded. Know for sure what the charging system is putting out. Your scooter should be 12.8v to 14.0V when cruising. It works for 12V-24V.Mini size and easy to install,work...

    Shorai Charge and Store Battery Management System which includes STORE MODE for maximum battery life during long-term storage, CHARGE MODE charges, balances, and performs cell diagnostics. Also features a retractable hook to hang from grips,...

    Are you running a 4 valve Gy6 Head and want to run your NCY direct ignition? Keep your igntion coil from failing out. Our CNC holder bolts to the head and comes with all stainless hardware. Loctite is recommended. Put the coil at the correct...

    $9.50

    $8.55

    $84.95

    $76.45

    $19.00

    $18.05

    Dr. Pulley HiT Performance Clutch Gy6 150-232cc  p/n 181401 GY6  2.8mm  6.3mm Connector Kit  338 pieces GY6 Big Bore 171cc  61MM complete kit with Carb . NCY or TAIDA
    Dr. Pulley HiT Performance Clutch Gy6 150-232cc p/n 181401 GY6 2.8mm 6.3mm Connector Kit 338 piecesGY6 Big Bore 171cc 61MM complete kit with Carb . NCY or TAIDA

    This performance Dr. Pulley HiT clutch is specifically made for the GY6 150cc engine. The DR. PULLEY clutch does come with the outer clutch drum. Clutch Outer diameter: 122mm - for use with 125mm ID clutch bell. Center opening: Width - 28mm;...

    GY6 Connector Kit includes the following. 20 Short Green Protectors 20 Long Green Protectors 5 - 6 Pin Male Connector 2.8mm 5 - 6 pin Female Connector 2.8mm 10 - 4 Pin Male Connector 2.8mm 10- 4 pin Female Connector 2.8mm 10 - 2 pin Female...

    Looking to get more POWWWER out of your GY6 swapped Ruckus or GY6 powered Motor. TRS has a complete bolt on kit just for you with everything you need. We even installed the Throttle cable and jet the carb for you.

    $299.00

    $269.10

    $24.99

    $22.49

    (1)

    $550.00

    $495.00

    GY6 CORKSCREW POLISHED MANDREL BENT FOR FATTY EXHAUST v3 GY6 CORKSCREW POLISHED MANDREL BENT FOR FATTY EXHAUST v5 GY6 Crankcase Oil Seal size 19.8*30*7 set of 2 Made by Honda
    GY6 CORKSCREW POLISHED MANDREL BENT FOR FATTY EXHAUST v3GY6 CORKSCREW POLISHED MANDREL BENT FOR FATTY EXHAUST v5GY6 Crankcase Oil Seal size 19.8*30*7 set of 2 Made by Honda

    THE RUCK SHOP is now offering custom 304 Mandrel Stainless Steel headers. These Madrel 304 Stainless headers come with a NEW fully polished Biltwell Baffled  Muffler and bracket.

    THE RUCK SHOP is now offering custom 304 Mandrel Stainless Steel headers. These Madrel 304 Stainless headers come with a NEW fully polished Biltwell Baffled  Muffler and bracket.

    Genuine Honda Crankcase Oil Seal size 19.8*30*7 for 150cc and 125cc GY6 4-stroke engines and 150cc GY6 4-stroke.

    Comes in pack of 2

     

    $900.00

    $855.00

    $900.00

    $855.00

    $5.99

    $5.69

    GY6 CVT Cover Spacers - Concave Contour - Sold each GY6 ENGINE REINFORCEMENT CASE BRACE Stainless steel - brace only GY6 OIL DIPSTICK NCY (TITANIUM)
    GY6 CVT Cover Spacers - Concave Contour - Sold each GY6 ENGINE REINFORCEMENT CASE BRACE Stainless steel - brace onlyGY6 OIL DIPSTICK NCY (TITANIUM)

    Have you lost your spacers and have a TRS Anklebiter (or any similar) GY6 CVT Cover on your GY6 engine? Made in-house on our CNC lathe. Concave for all CVT covers to help belt slap on longer 842 belts. Sold each just in case you only need one....

    GY6 ENGINE REINFORCEMENT CASE BRACE - Stainless steel - brace only Raw high quality STAINLESS STEEL - NO RUST!!! CAN BE HIGH MIRROR POLISHED! OR POWDER COATED TO MATCH YOUR BIKE FOR A CUSTOM ENGINE LOOK. ***CASE BRACE COMES RAW - NOT POLISHED ***...

    NCY upgrade/replacement dipstick. Give your oil dipstick a stunning look with this titanium finish. Quality upgrade that looks great on your bike. Works on all GY6 125/150 models

    $3.00

    $2.70

    $165.00

    $25.99

    $23.39

    GY6 Oil Dipstick Revolver GEEEN ONLY  CLOSEOUT SALE GY6 TWIN HEADER POLISHED MANDREL BENT FOR FATTY EXHAUST HOCA PERFORMANCE GY6 CAM A12 A9 TAIWAN MADE
    GY6 Oil Dipstick Revolver GEEEN ONLY CLOSEOUT SALEGY6 TWIN HEADER POLISHED MANDREL BENT FOR FATTY EXHAUST HOCA PERFORMANCE GY6 CAM A12 A9 TAIWAN MADE

    Looking for something to add to your Ruckus that not everyone has? The NCY Revolver Oil Dipstick is here with 7 different colors to choose from. Comes in: Silver, Gold, Orange, Red, Blue, Purple, or Green. Ships for Free. Dipstick can be adjusted...

    THE RUCK SHOP is now offering custom 304 Mandrel Stainless Steel headers. These Madrel 304 Stainless headers come with a NEW fully polished Biltwell Baffled  Muffler and bracket.

    Performance Camshaft designed specifically for the GY6 Engine. This cam is ideal for increasing low end power. With its increased leading slope and later intake valve opening makes this the perfect upgrade to go along with your larger...

    $29.99

    $14.99

    $650.00

    $552.50

    $39.99

    $35.99

    Honda  fit Brake Lever with BRAKE SWITCH  - BLACK HONDA RUCKUS  FRONT END DISC KIT RRGS NCY OR  ADELIN SHIPS FREE HONDA RUCKUS MOTO GP EXHAUST FOR GY6 MOTOR FATTY
    Honda fit Brake Lever with BRAKE SWITCH - BLACKHONDA RUCKUS FRONT END DISC KIT RRGS NCY OR ADELIN SHIPS FREE HONDA RUCKUS MOTO GP EXHAUST FOR GY6 MOTOR FATTY

    Universal Fit Brake Lever. In Black. Great for those that want to run no left switch boxes or looking for a matching lever for the NCY front end kits. Comes with brack switch. USA Stainless hardware for clamp with nylock nut for shouldered bolt....

    RRGS LOW DOWN FRONT END KIT CONTENTS: 1 X SET OF BLACK RRGS LOW DOWN FORKS 1 X 4 PISTON CALIPER 1 X RRGS CALIPER MOUNT 1 X FLOATING ROTOR 1 X NCY FRONT AXLE 1 X SET OF TITANIUM COATED ROTOR BOLTS

    Honda Ruckus Moto GP exhaust for Fatty Tire 12X7, 12X8 with GY6 ENGINE SWAP. We have made an GP exhaust like no other. Our TRS exhaust follows the frame of the ruckus and allows you to change you oil. High mounted Header to help with clearence....

    $14.99

    $13.49

    $420.00

    $378.00

    $330.00

    $290.39

    HONDA RUCKUS TANK COVER WASHER KIT 3 COLORS FREE SHIPPING 6mm K & S Black or Stainless Steel LED License Plate Mounting Bolts KICKSTAND FOR LOWERED HONDA RUCKUS ZOOMER MADE IN USA SHIPS FREE
    HONDA RUCKUS TANK COVER WASHER KIT 3 COLORS FREE SHIPPING 6mmK & S Black or Stainless Steel LED License Plate Mounting Bolts KICKSTAND FOR LOWERED HONDA RUCKUS ZOOMER MADE IN USA SHIPS FREE

     Tired of cracking your tank cover plastics. Get rid of those honda Clips and use our Tank Washer with bolt and Nylock Nuts. Each pack comes with 4 CNC aluminum T-6160 Bilet washers and 4 m6x25mm stainless socket cap bolts and nylock nuts

    K & S Black Stainless Steel LED License Plate Mounting Bolts - License plate mounting bolts in a hex shape LED light in the center of each bolt Constant light to license plate; does not flash Sold in pairs comes in either black or stainless...

    This compact kickstand design is made for your lowered Honda ruckus. Simple from the outside yet in contains a spring loaded ball bearing locking mechanism on the inside. Powder Coated Gloss black and Made 100% in America.

    $9.99

    $9.49

    $23.50

    $22.32

    (1)

    $84.00

    $71.39

    Koso Racing clutch for Gy6 all black LED FLASHER 552 MADE IN USA Led Turn Signal Set, Universal Fit. BLACK
    Koso Racing clutch for Gy6 all black LED FLASHER 552 MADE IN USA Led Turn Signal Set, Universal Fit. BLACK

    All black racing clutch WITH 1500 SPRINGS by KOSO for GY6 scooters. NOT A CHINESE RACE CLUTCH THAT THE PADS COME OFF ON MADE IN TAIWAN THE BEST OF THE BEST.

    If you have stock signals up front, this is all you need for Rear LED blinkers or TurtleHead. LED Blinkers at both front and rear require the TRS MET ZOOMER FLASHER

    UNIVERSAL LED TURN SIGNALS 8mm Bolt SET OF TWO: Right + Left Low Power Consumption 12V 1W High Quality, Weather Sealed. Light Color: Amber LED Body: ABS Plastic, Flat Black Body. - See more at:...

    $54.00

    $45.90

    $4.99

    $15.95

    $14.35

    LEFT SIDE REAR LEVER SWITCH AND BRACKET FOR CNC ADELIN LEVERS LFX14A4-BS12 Battery Shorai 12v 14 AH PBEq LiFePO4 Gy6 big bore LFX14L2-BS12 Battery Shorai 12v for GY6 big bore Ruckus 210 CCA
    LEFT SIDE REAR LEVER SWITCH AND BRACKET FOR CNC ADELIN LEVERS LFX14A4-BS12 Battery Shorai 12v 14 AH PBEq LiFePO4 Gy6 big bore LFX14L2-BS12 Battery Shorai 12v for GY6 big bore Ruckus 210 CCA

    All you riders with CNC levers and No Left hand switch we now have the solution in our PATENT PENDING Ruckus CNC Left hand switch. Comes with everything you need to install a left switch on your CNC levers. Fits Adelin and most other CNC Clutch...

    The Lithium Iron Phosphate battery is the ultimate in weight versus power technology. This battery weighs in at only 1.99 pounds and offers an incredible 210 C.C.A.

    The Lithium Iron Phosphate battery is the ultimate in weight versus power technology. This battery weighs in at only 1.46 pounds and offers an incredible 210 C.C.A. This is a drop in replacement for your Lead-acid battery, and will require no...

    $24.99

    $22.49

    $159.95

    $143.95

    $159.95

    $143.95

    (1)
    Lowboy low down Shock Chrome Adjustable Ruckus & GY6 230mm Lowboy low down Shock Chrome Spring Adjustable Ruckus & GY6 M10 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS
    Lowboy low down Shock Chrome Adjustable Ruckus & GY6 230mm Lowboy low down Shock Chrome Spring Adjustable Ruckus & GY6 M10 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS

    Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this Aluminum and Chrome Spring Shock

    Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this Black Shock and Chrome Spring Shock

    We know not everyone has a local hardware store with a good selection of bolts, or you lose a bolt, or maybe you just want to upgrade your bolts. We got you covered. We are now offering M6 Stainless Steel Bolts , nuts, and washers. Get as many or...

    $159.00

    $130.49

    $159.00

    $119.25

    $1.40

    M6 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS M8 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS Main jet kit PWK Carburetor Keihin Polini Stage 6 OKO 10 jets
    M6 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS M8 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS Main jet kit PWK Carburetor Keihin Polini Stage 6 OKO 10 jets

    We know not everyone has a local hardware store with a good selection of bolts, or you lose a bolt, or maybe you just want to upgrade your bolts. We got you covered. We are now offering M6 Stainless Steel Bolts , nuts, and washers. Get as many or...

    We know not everyone has a local hardware store with a good selection of bolts, or you lose a bolt, or maybe you just want to upgrade your bolts. We got you covered. We are now offering M6 Stainless Steel Bolts , nuts, and washers. Get as many or...

    PWK MAIN JET KIT for most Slide carb which include Stage6 OKO Hoca Mikuni and more. Comes with 100, 102,105,108,110,112,115,118,120,122. These are made in Tawain.

    We also sell jet individual as well. Serach PWK to find them

    $0.39

    $0.82

    $19.95

    $17.95

    MAXIMA SCOOTER GEAR OIL 80W90 GL5 150ML TUBE FOR GY6 AND GET METAL RUBBER COATED REAR BRAKE CABLE HOLDER MIKUNI NEEDLE AND SEAT FOR TM32 FLAT SLIDE CARB
    MAXIMA SCOOTER GEAR OIL 80W90 GL5 150ML TUBE FOR GY6 AND GET METAL RUBBER COATED REAR BRAKE CABLE HOLDERMIKUNI NEEDLE AND SEAT FOR TM32 FLAT SLIDE CARB

    No more filling your transmission oil with your wife's or mom's turkey baster or laying your scooter on it's side. With Maxima unique tube just cut the end off, stick it in the hole and squeeze. 150ml is the perfect amount too.

    METAL CLAMP WITH RUBBER COATING TO HOLD REAR BRAKE CABLE SO IT DOES NOT HIT THE LIP OF THE WHEEL. ATTACHES TO CVT AREA. SEE PIC

    RUNNING A MIKUNI TM SERIES CARB WELL YOU NEED THIS NEEDLE AND SEAT. THE FACTORY NEEDLE AND SEAT IF FOR GRAVITY FED TANKS. IF YOU ARE RUNNING A MIKUNI FUEL PUMP OR OEM PUMP THE OEM SEAT IS TOO BIG CAUSING

    $5.99

    $5.81

    $3.00

    $2.84

    $23.37

    Mikuni TM series Carburetor carb jets Slow/Idle or Main Mikuni TM32-1 TM32 Carb w/ correct needle seat and jetted 32mm MOXI TAWIAN CNC HIGH QUALITY GRIPS 7/8 RED, SILVER AND BLACK
    Mikuni TM series Carburetor carb jets Slow/Idle or Main Mikuni TM32-1 TM32 Carb w/ correct needle seat and jetted 32mmMOXI TAWIAN CNC HIGH QUALITY GRIPS 7/8 RED, SILVER AND BLACK

    Choose from slow/idle jet or main jets for the Mikuni TM Series Carb. Sold EACH.  Price is PER JET

    Mikuni TM32-1 Carb with 200 main jet 25 Idle jet and 1.5 Needle and Seat. This carbs do not come with these jets from the factory or needle and seat. We purchase and install the correct jet and needle/seat for your GY6 200+ cc motor. GET REQUIRED...

    IMPORTED SOFT RUBBER PERFORMANCE GRIPS 7/8 HANDLEBAR. CNC ALUMINUM VERY GOOD QUALITY AND HEAVY FOR ANTI-VIBRATION.  3 COLORS TO CHOOSE FROM:

    BLACK, SILVER AND RED

    $4.50

    $4.05

    $199.00

    $189.05

    $14.95

    $12.70

    NCY Super Transmission Set GY6 NCY Throttle & Grip Set (Black, Bearing Style, 7/8") OKO 28MM 30MM PWK REPLACEMENT FLOAT BOWL GASKET
    NCY Super Transmission Set GY6 NCY Throttle & Grip Set (Black, Bearing Style, 7/8")OKO 28MM 30MM PWK REPLACEMENT FLOAT BOWL GASKET

     This Super Trans Kit is one of the best dollar-for-dollar bolt-ons to improve your bike! Quicker accelleration, higher top speeds, and makes your CVT the smoothest operating trans in town!

    Ditch your plastic-on-plastic throttle tube set up for this performance needle bearing throttle tube. How thoughtful! This throttle tube assembly works on any scooter with 7/8" diameter bars. Not for dual throttle cable setup

    Genuine OKO float bowl gasket for PWK 28MM-30MM CARB

    $229.00

    $183.20

    $72.99

    $59.85

    (1)

    $4.99

    $4.24

    OKO A7RTKC Power Spark Plug Dual Electrode same as CR7HSA OKO CR7HIX IRIDIUM Spark Plug for all 150-232cc GY6 Password JDM Ruckus / Zoomer Gas Cap Cover V.1  Red Black or Raw
    OKO A7RTKC Power Spark Plug Dual Electrode same as CR7HSA OKO CR7HIX IRIDIUM Spark Plug for all 150-232cc GY6 Password JDM Ruckus / Zoomer Gas Cap Cover V.1 Red Black or Raw

    OKO POWER A7RTKC (CR7HSA NKA PART NUMBER) PLUG FOR ALL GY6

    OKO POWER A7RTKC (CR7HSA NKA PART NUMBER) PLUG FOR ALL GY6

    Now you can cover up your ugly steel gas cap with the Password:JDM milled aluminum gas cap cover. Our gas cap features a low profile design for the cleanest look possible. Using the included set screws, this cap is virtually impossible for...

    $4.99

    $4.24

    $10.50

    $9.45

    $37.99

    $24.69

    RDR OKO Reinforced Heavy Duty Gy6 Starter Clutch Assembly RRGS PH80 Replacement Brake Pads SPORT AND RACE Taida GY6 150 Engine Bushing Set (3pcs / set)
    RDR OKO Reinforced Heavy Duty Gy6 Starter Clutch AssemblyRRGS PH80 Replacement Brake Pads SPORT AND RACE Taida GY6 150 Engine Bushing Set (3pcs / set)

    RDR / OKO Reinenforced Heavy Duty Starter Clutch Assembly for 150cc + GY6 4-stroke QMI152/157 and QMJ152/157 engines. You will need a clutch tool to install this. These are very heavy duty for up 232cc Made in Taiwan by OKO. See related items below.

    Just like any other pad, eventually they need to be replaced. Use these to replace your worn down PH80 Disc Brake Caliper Pads. RED= SPORT ORANGE = RACE

    Is your motor sagging? These Taida GY6 bushing sets use a thick metal sleeve which makes installing bushings installation much easier.

    $49.99

    $39.99

    $21.99

    $12.99

    $12.34

    Taida GY6 150 Transmission Bearing Set and Seals Taida GY6 61mm Big Bore Cylinder Kit FORGED Piston A case 171cc Taida GY6 Big Valve Cylinder Head 53MM A CASE 28/23 VALVES
    Taida GY6 150 Transmission Bearing Set and Seals Taida GY6 61mm Big Bore Cylinder Kit FORGED Piston A case 171ccTaida GY6 Big Valve Cylinder Head 53MM A CASE 28/23 VALVES

    Taida Complete GY6 Transmission Bearing Kit and seals. No use in just getting one when you need seals too. We sell it together. Highest quality bearings. 

    Taida Drop in 61mm NO boring required on your A case gy6 motor. This Taida 61mm Big Bore Cylinder kit with forged piston will increase your displacement to 170cc with a stock crankshaft. We recommend using this with a Taida Big Port Cylinder...

    Sometimes, just getting more air and fuel in and more exhaust out of the GY6 is how you want to make power, rather than feeding more into the cylinder just to cram it in with the stock sized valves. With big 28/23 valves, getting more in will...

    $49.99

    $44.99

    $179.99

    $170.99

    $159.99

    $143.99

    THE RUCK SHOP VINYL STICKER 6.5 INCHES LONG 6 AVAILABLE COLORS TRS 100% Carbon Fiber Key Guard Honda Ruckus Zoomer Numbered TRS 28MM 30MM OKO EXTENDED FLOAT BOWL T-6061 CNC
    THE RUCK SHOP VINYL STICKER 6.5 INCHES LONG 6 AVAILABLE COLORSTRS 100% Carbon Fiber Key Guard Honda Ruckus Zoomer NumberedTRS 28MM 30MM OKO EXTENDED FLOAT BOWL T-6061 CNC

    The Ruck Shop Vinyl sticker comes in Chrome, NeoChrome, Gold,Red, White or Black. 6.5 long x 2 tall. If you are ONLY getting a sticker this will ship in an envelope regular mail no tracking. Pictures are dulled down due to clear film. 3M vinyl UV...

    Finally back again. 100% Carbon Fiber MADE IN THE USA Key guard for the Honda Ruckus Zoomer 03-16. Each piece is buffed to a high shine and signed by Greyduck as well as serial numbered.

    TRS 28MM 30MM OKO EXTENDED CNC FLOAT BOWL Thank you for purchasing our TRS Extended float bowl. This bowl was designed for prevention of fuel starvation while running at Wide Open throttle for extended period of time. Normally the Mikuni Fuel...

    $1.99

    $1.79

    $45.00

    $42.75

    $125.00

    $112.50

    TRS 9 TO NOON LICENSE PLATE FRAME CNC  6061 ALUMINUM TRS AXLE SPOOL 12mm axle MADE IN USA Fork Protector 3 colors TRS BANJO BOLT W/ BLEEDER -
    TRS 9 TO NOON LICENSE PLATE FRAME CNC 6061 ALUMINUM TRS AXLE SPOOL 12mm axle MADE IN USA Fork Protector 3 colors TRS BANJO BOLT W/ BLEEDER -

    NO PILL IS NEEDED TO GET YOUR PLATE STANDING UP. IT GOES FROM NINE TO NOON WITH EASY. ALL JOKES ASIDE. IF YOU WANT TO RUN YOU PLATE VERTICAL OR HORIZONTAL ALL YOU DO IS REMOVE THE 2 LITTLE BOLTS AND REPOSITION, EASY AS THAT. COMES WITH ALL...

     We were tired of waiting for these to come in stock so we made our own. Fits all 12mm axles.. Made from 6061 Billet Aluminum right here in the USA. Comes in Raw, Anodized Black or Red

    Hydraulic banjo bolt with bleeder valve. Supplied with two sealing washers. When doing a disk conversion in tight quarters, these bolts allow for easy access to bleed your system. M8x1.25mm works

    $49.00

    $44.10

    $34.99

    $27.99

    $6.00

    $4.80

    TRS BILLET REARSETS REAR SET BACKS HONDA RUCKUS MADE IN USA TRS BOTTLE CAP V2 GAS CAP FOR RUCKUS & MET NO LOGO TRS CNC 6061 GY6 BILLET VALVE COVER MADE IN USA
    TRS BILLET REARSETS REAR SET BACKS HONDA RUCKUS MADE IN USATRS BOTTLE CAP V2 GAS CAP FOR RUCKUS & MET NO LOGOTRS CNC 6061 GY6 BILLET VALVE COVER MADE IN USA

    Not only have we made ours thicker to withstand even the big guys, we space them out away from the frame. You spend all your money to powdercoat your frame don't ruin it by using other rearsets.

    TRS BOTTLE CAP NO LOGO Vented Gas Cap that fits both HONDA Ruckus and Metropolitan.This cap comes complete no need to swap parts from your OEM cap or break off tabs. It's ready to go. Unpack and put on. No more messing... ALL BILLET

    Want something no one on the market has ? We started with a big chunk of 6061 billet aluminum and made something special. Our TRS valve cover comes in either Hard anodized Black or raw. Comes with all hardware and vent. Proper vent cover is all...

    $125.00

    $118.75

    $69.99

    $62.99

    $199.99

    $179.99

    TRS Complete Performance Oil Cooler for GY6 motors TRS GY6 STAINLESS FAN COVER FITS BOTH A AND B CASE  3 COLORS TRS HORIZONTAL LICENSE PLATE FRAME CNC 6061 ALUMINUM 2 WELDED
    TRS Complete Performance Oil Cooler for GY6 motors TRS GY6 STAINLESS FAN COVER FITS BOTH A AND B CASE 3 COLORS TRS HORIZONTAL LICENSE PLATE FRAME CNC 6061 ALUMINUM 2 WELDED

    This oil cooler kit is the perfect addition to your high performance or bone stock GY6. More oil, cooler oil, equals lower engine temperatures, longer oil life and longer engine life in all riding conditions. Includes all hardware and lines to...

    TRS GY6 FAN COVER IN 304 STAINLESS STEEL FIT BOTH GY6 A AND B CASE. COMES WITH STAINLESS 18-8 SCREWS. YOUR CHOICE OF RAW, POWDERED  GLOSS BLACK, MIRRORED POLISHED. MADE IN AMERICA ABOVE PIC IS GY6

    TRS CNC 6061 ALUMINUM LICENSE PLATE THAT IS TIG WELDED. HARD ANODIZED BLACK AND MADE HERE IN THE USA. YOU HAVE IT ALL LOOKING NICE SO DON'T FORGET THE LITTLE DETAILS. FITS GROM, RUCKUS , METROPOLITAN, AND GY6 SWAPS

    $149.00

    $126.65

    $19.99

    $16.99

    $45.00

    $40.50

    TRS LIMITED EDITION REAR SPOILER CARBON VACUUM INFUSED USA MADE TRS LOGO WAFER SUNGLASSES BLACK UV400 PROTECTION TRS R6 Under Seat Mount Smoke Taillight w/  Intergrated signals
    TRS LIMITED EDITION REAR SPOILER CARBON VACUUM INFUSED USA MADETRS LOGO WAFER SUNGLASSES BLACK UV400 PROTECTIONTRS R6 Under Seat Mount Smoke Taillight w/ Intergrated signals

    Everyone love Carbon Fiber. You want something no ones else has? Introducing TRS 100% Carbon Fiber rear Ruckus Spoiler. Our spoilers are made here in USA and vacuumed infused using the same technogy as F1 cars. There are NOT fiberglass with 1...

    TRS LOGO WAFER SUNGLASSES BLACK UV400 PROTECTION. PERFECT FOR RIDING. EVERYONE HAS ASKED FOR THESE BECUASE THEY ARE PERFECT RIDING GLASSES.

    100% brand new and high qualitY Swap your stock Ruckus Light with these. You may need in line load equalizer for turn signals to flash. LED light color: Taillight is red, turn signal is amber Voltage: 12V Lens Color: Smoke Dimension: 6.5 x 3.3 x...

    $249.00

    (1)

    $4.99

    $4.74

    $59.00

    $53.10

    (4)
    TRS REAR GHOST FRAME COVER WORKS WITH FATTY MOUNTS 6061 CNC TRS Ruckus Billet Washer Dress up Kit Made in USA 3 COLORS TRS Ruckus Eazy Rider CNC Forward Foot Rest Footrest with Pegs
    TRS REAR GHOST FRAME COVER WORKS WITH FATTY MOUNTS 6061 CNC TRS Ruckus Billet Washer Dress up Kit Made in USA 3 COLORSTRS Ruckus Eazy Rider CNC Forward Foot Rest Footrest with Pegs

    Fits Honda Ruckus 2003-2015 with or without fatty mount . Our design allows you to mount even if you have a popular fatty stretch extension kit. Made of 6061 BILLET aluminum for durability and machined right here in the USA, The TRS Rear Frame...

    Complete washer and bolt kit for your Honda Ruckus. This kit consists of 46 pieces Each set comes complete with: 6x Seat frame washers and bolts (Socket Cap Head M8) 4x Main frame washers and bolts (Socket Cap Head M10) 4x...

     The TRS Eazy Rider Forward Foot Rest was made because other footrest failed.  Take a close look, you can actually put your feet on the pegs!!! We extended the foot pegs and gave them a cogged end design to help with foot slippage.

    $49.99

    $44.99

    (1)

    $59.00

    $53.10

    $139.99

    $125.99

    TRS RUCKUS OG CNC HANDLEBAR  CNC BILLET 35MM TRS Ruckus Side Steps Step Rails 6061 billet for NCY Tank Cover TRS Ruckus Zoomer  Frame Extension Spacers Billet  2 COLORS
    TRS RUCKUS OG CNC HANDLEBAR CNC BILLET 35MM TRS Ruckus Side Steps Step Rails 6061 billet for NCY Tank CoverTRS Ruckus Zoomer Frame Extension Spacers Billet 2 COLORS

    THE RUCK SHOP IS BRINGING BACK THE OG (ORIGINAL GANGSTAR) BARS. YOU O.G. RIDERS REMEMBER THESE. WELL, THEY ARE BACK. YOU WILL NEED 35MM CLIP ON BARS WHICH YOU CAN FIND FOR UNDER $50. THIS IS A INEXPENSIVE WAY TO GET SOME AWESOME BARS ON YOUR...

     To really set off the look of your Honda Ruckus after removing the OEM Floorboards, you need to use these Honda Ruckus Side Steps. They go hand-in-hand with the Honda Ruckus Frame Splitter.

    The TRS Frame Spacers extend the frame, pushing the seat back and giving taller riders a more comfortable riding position or just stretching your ruckus as long as you can. CNC machined from solid billet AL6061-T6 aluminum for maximum strength....

    $125.00

    $118.75

    $65.00

    $58.50

    $135.00

    $114.75

    TRS SPIDER HEADLIGHT LOWERED BAR 30W CREE LED 03-16 RUCKUS TRS Triple Tree Cover for Honda Ruckus Zoomer 6061 billet TRS UNDERSEAT STORAGE THUMB SCREW
    TRS SPIDER HEADLIGHT LOWERED BAR 30W CREE LED 03-16 RUCKUS TRS Triple Tree Cover for Honda Ruckus Zoomer 6061 billet TRS UNDERSEAT STORAGE THUMB SCREW

    EVER WONDER HOW A SPIDER SEES AT NIGHT? WE DID. Introducing the TRS Spider Headlight bracket with 3 options. Comes with Cree 30W 12V LED lights. Power: 30W Working Voltage: 10-45V DCLEDs: 6pcs * 5W High Intensity Cree LED Lifespan: 50,000+ Hours...

    Wanna hid that stock triple tree. Our TRS triple tree cover for the Honda Ruckus / Zoomer is the solution. Cover your rusted OEM triple tree.  Made from Billet T-6061 .25" aluminum. Comes will all stainless hardware.

    Are you Rocking a Lower Seat frame or Dorf Seat and can't flip up the seat but need to get to your registration or paperwork and a screwdrive will not work ? We have the solution you are looking for.

    $125.00

    $106.25

    $34.99

    $26.94

    $4.25

    $3.82

    TRS UNIVERSAL CNC KEY HEAD MADE IN USA BILLET 6061 TWO BROTHER EXHAUST FLANGE STAINLESS Two Brothers TBR Tarmac Exhaust (Carbon Fiber) gy6 fatty
    TRS UNIVERSAL CNC KEY HEAD MADE IN USA BILLET 6061TWO BROTHER EXHAUST FLANGE STAINLESS Two Brothers TBR Tarmac Exhaust (Carbon Fiber) gy6 fatty

    TRS KEY HEAD IS MADE WITH 6061 ALUMINUM AND CNC RIGHT HERE IN MERICA . NICE LITTLE ADDITION TO YOUR HONDA RUCKUS OR MET.

    NOTE: YOU MUST GRIND OFF TOP OF KEY TO FIT INSIDE SLOT. HAS SET SCREWS. COMES ONLY IN BLACK CONTRAST CUT

    Looking to use your Two Brother exhaust that was on your GET motor but can't . We have the fix. Our Stainless Steel flange has a 1.25 opening perfect for a custom GY6 header. Unbolt your old header from the muffler and weld on the new header to...

    With a unique scooter like a Swapped Honda Ruckus you need a unique exhaust, Two Brothers Racing has designed something special in the Tarmac exhaust. The innovative carbon fiber Tarmac exhaust will turn heads with a new design that has been...

    $17.99

    $16.19

    $14.99

    $13.49

    $575.00

    $488.75

    Universal Bar end mirror Swivels 7/8 (22mm) works on either side XK GLOW LED HEADLIGHT BULB HI/LOW BEAM H4 ERROR FREE KIT YOSHIMURA FATTY CARBON EXHAUST FOR 4 VALVE GY6 205cc - 232cc
    Universal Bar end mirror Swivels 7/8 (22mm) works on either sideXK GLOW LED HEADLIGHT BULB HI/LOW BEAM H4 ERROR FREE KIT YOSHIMURA FATTY CARBON EXHAUST FOR 4 VALVE GY6 205cc - 232cc

    Universal Bar end mirror Swivels 7/8 (22mm) works on either side

    Looking to keep the stock Ruckus Headlights but want Brighter lights. Get super bright Lights with less watts than stock. Easy Plug and Play and Ballast go inside Battery Box.

    Custom Genuine Yoshimura Exhaust for 4 Valve TAIDA or HOCA head and +8.2 stroker Crank. 205cc or 232cc. Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL bracket for Fatty

    $19.99

    $17.99

    (1)

    $39.99

    $475.00

    TRS Ruckus Zoomer MET and GY6  Ultimate License Plate Frame USA 150cc 4 Stroke Long Case GY6 Motor Engine 11 pole SHIPS FREE 4 PIN RECTIFIER
    TRS Ruckus Zoomer MET and GY6 Ultimate License Plate Frame USA 150cc 4 Stroke Long Case GY6 Motor Engine 11 pole SHIPS FREE4 PIN RECTIFIER

    This license mount allows you to adjust the frame so that your license place can be mounted in a ton of positions and a ton of locations, making truly unique to anything out there in the market

     

     

     

    150cc 4-Stroke Long-Case GY6 Gas Engine with automatic CVT transmission. This scooter engine is used in a wide variety of applications, including full-size street legal scooters, all terrain vehicles (ATVs), dirt bikes, and go karts. Compatible...

    4 Pin Regulator/ Rectifier for 150cc and 125cc 4-stroke QMJ152/157 QMI152/157GY6 engine based scooters. Electrical items are non-returnable, please check photos and specifications before ordering.

    $44.99

    $38.24

    (1)

    $449.00

    $426.54

    (2)

    $17.95

    $17.05

    5 PIN RECTIFIER 6 PIN RECTIFIER 1 PLUG STYLE GY6 6 PIN RECTIFIER GY6 150 FOR 11 POLE
    5 PIN RECTIFIER6 PIN RECTIFIER 1 PLUG STYLE GY6 6 PIN RECTIFIER GY6 150 FOR 11 POLE

    5-pin regulator/rectifier for vehicles with up to 250cc 4-stroke engines. Electrical items are non-returnable, please check photos and specifications before ordering. 12 volt regulator 5 wire connection, 2 plugs all female Wire Length: 7½ inches

    6 Pin Regulator for 150cc and 125cc GY6 engines commonly found on Scooters, ATVs and Dune Buggies/Karts. Electrical items are non-returnable, please check photos and specifications before ordering.

     

    This 6 Pin Regulator for 150cc and 125cc GY6 engines is needed if you upgrade your 6 or 8 coil stator to an 11 coil stator.
    12 volt regulator Plug Style: 2 PLUGS 3 PIN AND 3 PIN MALE
      

    $23.25

    $19.76

    $23.99

    $22.79

    $23.99

    $21.59

    7 PIN RECTIFIER 78 " SLIDE THROTTLE CABLE 90 DEGREE BOTH ENDS MADE IN USA 85" Throttle Cable for Honda Carb stetched CVK
    7 PIN RECTIFIER78 " SLIDE THROTTLE CABLE 90 DEGREE BOTH ENDS MADE IN USA 85" Throttle Cable for Honda Carb stetched CVK

    7 Pin Regulator/Rectifier for 150cc and 125cc 4-stroke QMJ152/157 QMI152/157GY6 engine based scooters. This 7 pin plug is commonly found on "Tank" brand 150cc Chinese scooters. Electrical items are non-returnable, please check photos and...

    78 INCH BLACK THROTTLE CABLE MEASURED FROM BEND TO BEND. ADJUSTER CABLE BUILT INTO CABLE. SEE PICS FOR ALL THE DETAILS TESTED AND MADE IN THE U.S.A. *Don't forget to lube all cables with cable lube, WD-40 , or oil.

    Throttle cable with a 85" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb used mainly on extreme stretched of 13

    $22.50

    $21.37

    $35.00

    $29.75

    $18.99

    $18.04

    ATR DAN MAXX GY6 WIREHARNESS REPLACMENT RELAY 2 TYPES ATR RUCKUS GY6 ENGINE SWAP HARNESS WITH EXTRAS AUTHENTIC CRG BLINDSPOT 2" MIRROR WITH BILLET BAR END MOUNT
    ATR DAN MAXX GY6 WIREHARNESS REPLACMENT RELAY 2 TYPES ATR RUCKUS GY6 ENGINE SWAP HARNESS WITH EXTRAS AUTHENTIC CRG BLINDSPOT 2" MIRROR WITH BILLET BAR END MOUNT

    LOOKING FOR THOSE HARD TO FIND RELAYS THAT ATR AND DAN MAX GY6 HARNESSES USE. WE HAVE THEM IN STOCK PLEASE LOOK AT THE PART NUMBER ON TOP OF THE RELAY. ALL SHOULD HAVE 8 PRONGS. TWO RELAYS TO CHOOSE FROM: MY2N-J OR LY2NJ 12VDC Electrical items...

    ATR plug and play GY6 engine harness will eliminate the need to fuzz around with wiring your engine swaps! Reduce the chances of errors and problems. Pre-labeled and ready to go! COMES WITH CDI TOO Please take a look at the drop-down menus for...

    FEATURES: 6160-T6 BILLET ALUMINUM CONSTRUCTION ALL STAINLESS HARDWARE FULLY MODULAR ASSEMBLY (EACH PART CAN BE REPLACED INCLUDING THE MIRROR) WORKS ON BOTH LEFT AND RIGHT DUE TO ELBOW WE INCLUDE THE BILLET INTERNAL ADAPTER FOR VIRTUALLY EVERY...

    $9.99

    $8.99

    $175.00

    $166.25

    (1)

    $64.99

    $61.74

    BAN JIN GY6 High Torque Starter Motor Black Round Bar End mirror  7/8 (22mm) works on either side BLACK STAINLESS BRAKE LINE WITH FITTINGS 30 INCH
    BAN JIN GY6 High Torque Starter MotorBlack Round Bar End mirror 7/8 (22mm) works on either sideBLACK STAINLESS BRAKE LINE WITH FITTINGS 30 INCH

    High Torque Starter motor for 150cc and 125cc GY6 4-stroke QMJ152/157 QMI152/157 engines. This Starter Motor is recommended for any GY6 with a Big Bore Kit or Stroker Big Bore Kit. Bolt Hole Spacing: 78mm Shaft Length:

     

    A unique combining bar end weight and mirrors full height and adjustment

    BLACK STIANLESS BRAKE LINE WITH CHROME STRAIGHT FITTING AND 90 DEGREE CHROME BANJO FITTING ON OTHER END. MEASURES 30 INCHES FOR LINE. TOTAL LENGHT 33 INCHES. PERFECT FIT FOR THOSE RRGS/ADELINE FRONT END KITS.

     

    $109.00

    $103.55

    $14.99

    $13.49

    $34.99

    $29.74

    CDI Unit (Replacement); GY6 CLEAR LED BLINKERS BILLET BEZELS ONLY . 3 COLORS CLEAR LED BLINKERS W/ AMBER LED PAIR
    CDI Unit (Replacement); GY6CLEAR LED BLINKERS BILLET BEZELS ONLY . 3 COLORS CLEAR LED BLINKERS W/ AMBER LED PAIR

    AC CDI for GY6 Engines, as seen in photo. A typical CDI module consists of a small transformer, a charging circuit, a triggering circuit and a main capacitor. First, the system voltage is raised up to 400-600 Volts by a transformer inside the CDI...

    NEW PRODUCT. CNC LED BEZELS IN rAW, BLACK OR RED ANODIZED MADE IN THE USA MADE OF 6160 BILLET  CENTER HOLE 17mm. These are if you already have the TRS LED from us.

    NEW PRODUCT. SUPER BRIGHT AMBER LED IN CLEAR HOUSING. 1 INCH DIAMETER. PERFECT FIT FOR BATTERY BOX MOUNTING Features: Ready to Mount high intensity LED's: Recess / Flush mount LED's mount out of sight and out of the way. Dimensions: Indicator...

    $9.00

    $7.20

    $19.99

    $17.99

    $29.99

    $26.99

    CLEAR LED BLINKERS W/ AMBER LED PAIR WITH CNC BEZEL CONTRAST CNC Billet Control levers for Drum / Disc Brake BLACK OR POLISH CNC Round Bar End mirrors - Black
    CLEAR LED BLINKERS W/ AMBER LED PAIR WITH CNC BEZEL CONTRAST CNC Billet Control levers for Drum / Disc Brake BLACK OR POLISHCNC Round Bar End mirrors - Black

    NEW PRODUCT. SUPER BRIGHT AMBER LED IN CLEAR HOUSING. 1 INCH DIAMETER. PERFECT FIT FOR BATTERY BOX MOUNTING Features: Ready to Mount high intensity LED's: Recess / Flush mount LED's mount out of sight and out of the way. Dimensions: Indicator...

    CNC Billet control CRG Style Top Quality with Brake Switch Left for Clutch or Drum Brake Right for Disc Brake. SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN . We also install American Made O-ring in cup to help...

    CNC Billet Round Bar end Mirrors Specifications CNC machined Billet Aluminum Stainless Steel grab screw lock mirrors into place 4x mounting positions convex glass mirror diamter 7cm Fits 7/8 (22mm) handlebar Features A unique combining bar end...

    $45.00

    $40.50

    $149.00

    $126.65

    (1)

    $44.99

    $38.24

    Complete Front Hub w/ rotor adapter w/ all bolts included V2 TRS Ruckus Throttle Cable Adapter TRS  Mikuni DF-44 Fuel Pump & GY6 Coil Bracket COIL NOW INCLUDED
    Complete Front Hub w/ rotor adapter w/ all bolts included V2 TRS Ruckus Throttle Cable AdapterTRS Mikuni DF-44 Fuel Pump & GY6 Coil Bracket COIL NOW INCLUDED

    Professional Crafted front Billet Hub for 4x90 pattern front wheels (common monkey wheels as well as most ruckus custom wheels on the market, with Brake Adapter flange, 3 Titanium Finish Rotor, 3 Stainless bolts to attach adapter plate, and...

    Tired of trying to figure out what throttle cable to use on your GY6 carb when you swap it into your Ruckus? You need this part! Don't worry about having to hack up the GY6 cable bracket anymore to use your stock Honda Ruckus Throttle cable on...

    A GREAT answer as to where to put that ugly coil! Mount it down out of the way with your fuel pump, and hide them! This clever mount is designed to use the 2-bolt type coils, along with the popular Mikuni DF-44 Fuel Pump! With this bracket you...

    $124.99

    $118.74

    $17.99

    $15.29

    $49.00

    $44.10

    TRS Honda Ruckus Headlight Lowering Kit  Bolt-On! 3 COLORS TRS  Mainfold  intake riser flange  31mm DANMAXX GY6 ENGINE SWAP HARNESS W/ CDI , RELAY, COIL , REC.
    TRS Honda Ruckus Headlight Lowering Kit Bolt-On! 3 COLORSTRS Mainfold intake riser flange 31mmDANMAXX GY6 ENGINE SWAP HARNESS W/ CDI , RELAY, COIL , REC.

    Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower,

    The GY6 Intake Manifold Riser is here! Are you running the Angled Clocking Flange, and your air filter is sitting a bit too close to the cross-bar on the frame? This Intake Manifold Riser can help you get a better fitment! This raises the Angled...

    Parts Shop MAX Honda Ruckus 150cc GY6 motor swap harnes with CDI , COIL , RECTIFIER, AND STARTER RELAY WHEN BOUGHT THROUGH THE RUCK SHOP. MAX GY6 Ruckus Wire Harness Features: ~ Made for GY6 motor with stock or aftermarket controls ~ More...

    $48.00

    $40.79

    $29.99

    $23.99

    $175.00

    $168.00

    DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 Blk or Raw Dr. Pulley Roller 18X14 Weights GY6 sizes 10-14 grams Dr. Pulley Slider GY6 18X14 Weights 9 - 13 grams
    DANMAXX GY6 REAR DUAL HUB PATTERN 4X4 AND 4/110 Blk or Raw Dr. Pulley Roller 18X14 Weights GY6 sizes 10-14 gramsDr. Pulley Slider GY6 18X14 Weights 9 - 13 grams

    Dual Pattern, 4 lug 4 inch lug spacing, four 12mm x 1.25 thread studs, for use with golf cart wheels OR 4x110 ATV pattern M10mmX 1.5MM For use with wheels measuring 3 inch back spacing and 4 or 5 inch front spacing 10 or 12 inch dimeter is OK....

    Dr. Pulley 18X14Round Roller Weights for 125/150cc 4-stroke GY6 engines.
    Dr. Pulley Round Roller Weights have exceptional durability, heat resistance and are low friction and low wear.

     

    Dr. Pulley 18X14 Slider Roller Weights for 125/150cc 4-stroke GY6 engines.
    Dr. Pulley Slider Roller Weights have exceptional durability, heat resistance and are low friction and low wear.

    $150.00

    $142.50

    $14.99

    $13.49

    $22.99

    $18.39

    DYNA BEADS TIRE BALANCING CERAMIC BEADS Engine Rebuild Kit; GY6 Bearing and Gasket set  57.4 stock bore Exhaust Cap Nuts for GY6 150cc 125cc QMB139 & Honda 49cc engine
    DYNA BEADS TIRE BALANCING CERAMIC BEADSEngine Rebuild Kit; GY6 Bearing and Gasket set 57.4 stock bore Exhaust Cap Nuts for GY6 150cc 125cc QMB139 & Honda 49cc engine

    Motorcycles and Scooters ride s-m-o-o-t-h with Dyna Beads ®! You simply won't believe the ride... Glass smooth ride, every time, all the time. Dramatically longer tire life No rebalancing No spoke or rim weights Eliminates tire cupping. Easy...

    The perfect kit to completely rebuild your GY6 125/150 scooter. Whether it's a blown crank, or a frozen top end, this engine rebuild kit will do the trick perfectly when you get into those situations. The NCY Gasket set really makes this kit...

    Exhaust Cap Nuts for GY6 150cc/125cc and QMB139 50cc engines.

    $15.99

    $48.99

    $1.99

    $1.79

    Exhaust studs for GY6 150cc and  Honda 49cc engine M6 Final Drive Case Gasket (rear); GY6 FREE SHIPPING FUEL FILTER 90 TURN HORIZONTAL
    Exhaust studs for GY6 150cc and Honda 49cc engine M6Final Drive Case Gasket (rear); GY6 FREE SHIPPINGFUEL FILTER 90 TURN HORIZONTAL

    Exhaust studs for GY6 150cc/125cc,QMB139, & Honda 50cc engines . M6 can be used on both 49cc and 150cc gy6 . HONDA 49cc use 6mm and most stock gy6 use 6mm as well. Big Bore Heads usually use M8.

    Transmission cover gasket on GY6 125 - 150cc engines

    PERFECT STOCK OEM REPLACEMENT FUEL FILTER

    $1.99

    $1.79

    $5.99

    $4.79

    $6.95

    $6.25

    Gates Power Link Premium Belt  835-20-30 stock size Gates Power Link Premium Belt 842-20-30 GIFT CERTIFICATE IN $25, $50, $75 OR $100
    Gates Power Link Premium Belt 835-20-30 stock size Gates Power Link Premium Belt 842-20-30GIFT CERTIFICATE IN $25, $50, $75 OR $100

    Gates Premium Power Link drive belt size 835-20-30 for 150cc and 125cc GY6 based 4-stroke engines. Specifically designed for a variety of motorized CVT applications including street-legal scooters and go-kar

    Gates Premium Power Link drive belt size 842-20-30 for 150cc and 125cc GY6 based 4-stroke engines. Specifically designed for a variety of motorized CVT applications including street-legal scooters and go-kar

    HAVE SOMEONE SPECIAL THAT IS HARD TO SHOP FOR ON THEIR BIRTHDAY, HOLIDAY, OR JUST A SPECIAL OCCASION. THE RUCK SHOP HAS YOU COVERED. ORDER A GIFT CERTIFICATE IN $25,$50,$75 OR $100 DOLLAR DENOMINATIONS. EACH GIFT CERTIFICATE HAS A UNIQUE CODE THAT...

    $24.99

    $23.74

    $24.99

    $23.74

    $0.00

    GY6  / GET MOTOR FLYWHEEL PULLER GY6 11 coil POLE  Stator AC GY6 11 Pole / coil Stator 6Wire and 11 magnet  Flywheel combo AC
    GY6 / GET MOTOR FLYWHEEL PULLERGY6 11 coil POLE Stator ACGY6 11 Pole / coil Stator 6Wire and 11 magnet Flywheel combo AC

    Dennis Stubblefield MP#1 Flywheel Puller, 27mm x 1.00 Left Hand Thread (Male). Fits most import Scooters with 125cc/150cc GY6 4-stroke engine models as well as most Honda, Yamaha, Kawasaki, Suzuki, Tohatsu and Hodaka Scooters with Japanese...

    11 Coil Stator for 150cc and 125cc GY6 4-stroke QMI152/157 QMJ152/157 engines. Specs: Triphase Full Wave A/C Diameter: 87mm Width: 30mm Bolt Hole Spacing: 41mm Bolt Hole Diameter: 6mm Coil Wire Length: 20 inches Number of Coils: 11 Plug Style:...

    Complete 11 coil pole AC , 6 wire stator & 11 magnet flywheel. OEM replacement generator for 125 - 150 cc GY6 Chinese scooter engines. Wires: 3x Yellow 1x Green 1x Blue 1x Black YOUTUBE HOW TO INSTALL STATOR VIDEO You will need a flywheel...

    $17.99

    $17.09

    $38.99

    $35.09

    $57.99

    $49.26

    GY6 125-150cc Carburetor 24mm GY6 150  SHORT AXLE FOR FATTY MOD Taiwan made not chinese Genuine OKO 30mm CVK Carburetor w/ electric choke Taiwan
    GY6 125-150cc Carburetor 24mmGY6 150 SHORT AXLE FOR FATTY MOD Taiwan made not chinese Genuine OKO 30mm CVK Carburetor w/ electric choke Taiwan

    24mm Intake
     Air Filter Mount (outer diameter): 41.75mm
     Electric Choke
     Polished finish
    Float drain is located on the float bowl

    The Ruck Shop's Very Own. Short Axle used when installing a Fatty Tire/Rim combo with 12x8 or 10x8 rims on your GY6 Ruckus Swap. This is needed so your axle doesn't stick out like you are riding a Roman Chariot.

     

    30mm High Performance, After-Market CVK Carburetor for 150cc and 125cc GY6 4-stroke engines found on full-size street legal scooters, ATVs and off-road karts. Includes accelerator pump Air Filter Mount (outer diameter)

    $49.99

    $44.99

    $29.99

    $25.49

    $169.00

    $135.20

    GY6 8 coil Pole Stator  AC GY6 CVK Main Jet Kit  jets 100-140 sizes GY6 EXHAUST GASKET  COPPER MULTI LAYER
    GY6 8 coil Pole Stator ACGY6 CVK Main Jet Kit jets 100-140 sizesGY6 EXHAUST GASKET COPPER MULTI LAYER

    8 Coil Stator for 150cc and 125cc GY6 4-stroke QMI152/157 QMJ152/157 engines. Electrical items are non-returnable, please check photos and specifications before ordering. Specs: Full Wave A/C Diameter: 88mm Width: 30mm Bolt Hole Spacing: 41mm...

    Keihin Round Style Main Jet Kit Includes The Following Sizes: 100, 105, 108, 110, 114, 115, 120, 125, 130 & 140 10 Piece Set Has 1 of Each Size Thread Size: M5x0.80 Overall Length: 8mm

    Exhaust gasket for Gy6 150cc engines by NCY. Sold individually.

    $38.99

    $29.24

    $19.99

    $18.99

    $2.99

    $2.54

    NCY GY6 Gear Set 16x37 16X38  GY6 150 GY6 Header Exhaust Pipe GY6 HIGH COMPRESSION FORGED PISTON WITH RINGS TAIWAN
    NCY GY6 Gear Set 16x37 16X38 GY6 150GY6 Header Exhaust PipeGY6 HIGH COMPRESSION FORGED PISTON WITH RINGS TAIWAN

    GY6 Upgear kit. 7.1% upgear. 50 ton gear press required for install. Get the most out of your big bore kit or even a stock motor, with increased top speed and a more usable rev range. 20mm W x 20mm I.D you will need a transmission gasket which we sell.

    Front Exhaust Pipe for 150cc and 125cc GY6 engine based Sport Style scooters

    GY6 HIGH COMPRESSION FORGED PISTON WITH RINGS , WRISTPIN AND CLIPS . SKIRTS ARE CUT TO REDUCE MASS. PISTON IS DOMED TOPPED FOR HIGHER COMPRESSION. COMES IN 61MM ,62MM OR 63MM MADE IN TAIWAN

    $43.99

    $19.99

    $17.99

    $99.99

    $74.99

    GY6 IGNITION COIL FOR COMPOSIMO TRS COMBO FUEL BRACKET GY6 Intake Manifold Gasket GY6 MANIFOLD RISER 5MM
    GY6 IGNITION COIL FOR COMPOSIMO TRS COMBO FUEL BRACKETGY6 Intake Manifold GasketGY6 MANIFOLD RISER 5MM

    GY6 ignition coil for Horizontal cylinder, Honda style engines commonly found on ATVs, dirt bikes, mini choppers and pocket bikes. THIS COIL IS USED FOR COMPOSIMO COMBO FUEL PUMP / COIL BRACKET These engines can come with 2 styles of igntion...

    Intake manifold gasket for 150cc and 125cc GY6 4-stroke QMI152/157 and QMJ152/157 engines.

    IS YOUR CARB JUST HITTING THE FRAME. NEED A LITTLE RISE. TRY THIS 5MM RISER.

    FREE SHIPPING

    $19.99

    $17.99

    (1)

    $2.49

    $2.24

    $2.99

    $2.75

    GY6 REAR DRUM BRAKE SHOES GY6 Starter Clutch Nut Tool GY6 TRANSMISSION BEARING KIT
    GY6 REAR DRUM BRAKE SHOESGY6 Starter Clutch Nut Tool GY6 TRANSMISSION BEARING KIT

    Rear Drum Brake Shoe Set for 150cc and 125cc GY6 engine based scooters. Fits other makes and models and found in many popular 13" wheel sizes. Outer Diameter: 125mm Thickness: 28mm

    Starter Clutch Nut Removal Tool, 1/2" Drive x 4 Prong Clutch Tool. Allows you to remove the starter clutch nut from 125cc/150cc/180cc, 4-stroke GY6 engines commonly found in Scooters, ATVs, Carts, Buggies and UTVs.

    COMPLETE TRANSMISSION BEARING KIT WITH SEAL. COMES WITH ALL BEARINGs AND GASKET. IF YOU TAKE A BUTANE TORCH AND HEAT THE BACK OF THE PLATE THE BEARING USUALLY JUST FALL OUT. WE RECOMMEND YOU GET A NEW GASKET OR USE YAMABOND OR HONDABOND SEALANT.

    $14.99

    $13.49

    $23.99

    $21.59

    $34.99

    $31.49

    GY6 WHEEL FLANGED REAR WHEEL AXLE  NUT HARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR) HONDA OEM STYLE  FUEL FILTER 90 TURN HORIZONTAL
    GY6 WHEEL FLANGED REAR WHEEL AXLE NUT HARLEY DAVIDSON 10MM BANJO WASHERS WITH SEALS (PAIR)HONDA OEM STYLE FUEL FILTER 90 TURN HORIZONTAL

    GY6 WHEEL FLANGED REAR WHEEL NUT FOR GY6 125CC AND 150CC MOTORS

    HAVING ISSUES BLEEDING MASTER CYLINDER GET THESE BANJO WASHERS WITH SEAL COMES IN A PAIR WILL NEED 2 SETS IF YOU ARE DOING FRONT BRAKES. ONE SET FOR MASTER CYLINDER ONE SET FOR CALIPER SIDE.

    PERFECT STOCK OEM REPLACEMENT FUEL FILTER

    $3.99

    $3.59

    $2.99

    $2.84

    $2.99

    $2.75

    HONDA RUCKUS / ZOOMER REAR FLUSH MOUNT LED TAILLIGHT TURTLE HEAD HONDA RUCKUS Carbon Fiber Tank cover High end and Thick NCY HONDA RUCKUS CREE LED 6"  HEADLIGHT BAR W/ MOUNT 35W 3000 LUMENS
    HONDA RUCKUS / ZOOMER REAR FLUSH MOUNT LED TAILLIGHT TURTLE HEADHONDA RUCKUS Carbon Fiber Tank cover High end and Thick NCYHONDA RUCKUS CREE LED 6" HEADLIGHT BAR W/ MOUNT 35W 3000 LUMENS

    Looking to run a flush taillight that is high and tight. Look no farther. The TRS FLUSH MOUNT LED uses a quality made in the USA Light one of the brightest in the industry.

    This carbon fiber gas tank cover gives the Ruckus a high end and indestructable look. Nice and thick

    TRS Honda Ruckus 6" Single Row Performance LED Light Bar Headlight Conversion Kit Product Features: Comes with Powercoated matte black brackets. NOT a 1 piece bracket. 2 piece bracket allows for better installation and bracket not warpping....

    $82.00

    $73.80

    $189.99

    $170.99

    $109.99

    $98.99

    Honda Ruckus Frame Splitter Alumunum Imported Ships Free HONDA RUCKUS SOLID FRONT FRAME COVER GUARD BILLET T-6061 Honda Ruckus GET, GY6, ZUMA   License Plate Mount 12 position
    Honda Ruckus Frame Splitter Alumunum Imported Ships Free HONDA RUCKUS SOLID FRONT FRAME COVER GUARD BILLET T-6061 Honda Ruckus GET, GY6, ZUMA License Plate Mount 12 position

    The Honda Ruckus Frame Splitter is an easy way to cover up your coil and fuel pump? . Designed to fit over the fuel tank or its cover, the Frame Splitter really helps cover the rear section of the front sub-frame nicely when compared to the...

    Removing the OEM front frame plastics can really leave your Honda Ruckus looking bare. Well, TRS comes to the rescue with their Honda Ruckus Front Frame Cover. Cut out of 6061 billet Aluminum not just a cheap plate. These covers are attractive...

    OTTO FACTORY GY6 License Plate Mount with all hardware. Can be mounted Vertical or horizontal. Powder Coated in Black with Stainless Hardware. Mounts on the GY6 CVT case and allows you to run your plate 6 different ways. If you like it vertical...

    $29.00

    $27.54

    $64.99

    $58.49

    $38.99

    $35.09

    HONDA RUCKUS MET ZOOMER LED LIGHT FLASHER RELAY Honda Ruckus Side Steps Alumunum Imported, Ships Free Left Handle Switch to use with CNC levers  V2  FREE SHIPPING
    HONDA RUCKUS MET ZOOMER LED LIGHT FLASHER RELAYHonda Ruckus Side Steps Alumunum Imported, Ships Free Left Handle Switch to use with CNC levers V2 FREE SHIPPING

    HONDA RUCKUS LED FLASHER RELAY WITH INSTRUCTIONS AND GROUND ALREADY WIRED. Looking to add LED Blinkers or brake lights to your scooter? You will need either a set of in-line resistors for the circuit or replace the OEM flasher with our LED...

     To really set off the look of your Honda Ruckus after removing the OEM Floorboards, you need to use these Honda Ruckus Side Steps. They go hand-in-hand with the Honda Ruckus Frame Splitter.

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual. 

    $13.99

    $12.59

    (1)

    $29.00

    $26.10

    $15.00

    $12.00

    Left Handle Switch to use with CNC levers  V3  FREE SHIPPING Lowboy low down Short Shock BlK Adjustable for Ruckus & GY6 NCY MIKUNI  DF-44211 FUEL PUMP REBUILD KIT
    Left Handle Switch to use with CNC levers V3 FREE SHIPPINGLowboy low down Short Shock BlK Adjustable for Ruckus & GY6 NCY MIKUNI DF-44211 FUEL PUMP REBUILD KIT

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual. v3 ALL BLACK BUTTONS...

    Honda Ruckus low sitting rear shock. Drop that Ruckus down to even lower and be the most slammed Ruck on your block with this black on black rear shock. Top=Eye Bottom=Clevis 235mm, eye to clevis See difference in picture compared to NCY shock

    Fuel pump rebuild kit for Single outlet pump found on Ruckus Gy6 builds. Don't buy a new pump just rebuild it.

    $15.99

    $14.39

    $125.00

    $93.75

    $11.75

    GENUINE MIKUNI FUEL PUMP FOR GY6 SWAP MADE IN JAPAN MIKUNI NEEDLE AND SEAT FOR TM 28 SERIES FLAT SLIDE CARB Mikuni TM series Flat slide Carburetor carb 28mm w/  needle Seat
    GENUINE MIKUNI FUEL PUMP FOR GY6 SWAP MADE IN JAPANMIKUNI NEEDLE AND SEAT FOR TM 28 SERIES FLAT SLIDE CARBMikuni TM series Flat slide Carburetor carb 28mm w/ needle Seat

    Mikuni Pulse Fuel Pumps employ an engine’s fluctuation in crankcase pressure to pump fuel from a remote fuel tank to an engine’s carburetor Rectangular fuel pump with 1 outlet for a single carburetor

     

    RUNNING A MIKUNI TM SERIES CARB WELL YOU NEED THIS NEEDLE AND SEAT. THE FACTORY NEEDLE AND SEAT IF FOR GRAVITY FED TANKS. IF YOU ARE RUNNING A MIKUNI FUEL PUMP

    Mikuni TM series carburetors are the most popular high performance single carburetors in the sport of motorcycling. These time and track-tested carburetors have proven themselves on all terrains and in all conditions. They boast a large selection...

    $29.99

    $28.49

    $18.50

    $16.65

    $155.00

    $139.50

    Multi Function Pocket Tool Multi Tool with Sockets NCY 12MM X 250MM NEO CHROME FRONT AXLE FOR RUCKUS DISC KITS
    Multi Function Pocket ToolMulti Tool with SocketsNCY 12MM X 250MM NEO CHROME FRONT AXLE FOR RUCKUS DISC KITS

    Aluminum body for lighter weight. Anodized for corrosion protection and great looks. Compact size packs multi function utility. Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and flat head screwdrivers.

    Aluminum body for lighter weight. Anodized for corrosion protection and great looks. Compact size packs multi function utility. Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and flat head screwdrivers.

    TRS 12MMX250MM. Got that RRGS fork kit but no axle. Same axle that comes in the NCY AND TRS Front end Kits. Get it NOW.  Not found in States IMPORTED

    $14.95

    $10.99

    $25.99

    $22.09

    NCY 61mm Cylinder Kit Aluminum 171cc GY6 171 big bore Aluminum Intake Manifold 30mm GY6 FREE SHIPPING NCY Racing Big Valve Cylinder Head 2 valve, 58.5mm GY6 150
    NCY 61mm Cylinder Kit Aluminum 171cc GY6 171 big bore Aluminum Intake Manifold 30mm GY6 FREE SHIPPINGNCY Racing Big Valve Cylinder Head 2 valve, 58.5mm GY6 150

    NCY GY6 150 61mm Cylinder Kit w/o head 62.5mm outer sleeve diameter. Give your GY6 based scooter some serious power with this BOLT ON (That’s right BOLT ON!) 171.3cc kit for most GY6 125/150 engines. As far as we know, this is the only 61...

    Our intake manifolds offer a smooth bore and larger inlet diameter over stock. Combined, these two assets allow more air and more fuel into your cylinder, giving you more power. Intake manifold upgrades are a must for larger carburetors. It...

     This head will allow your cylinder to breathe better! Works great with our 58.5mm cylinder assembly. Works great with the 58.5mm Cylinder or for more compression use with 61mm cylinder.

    $156.99

    $141.29

    $29.99

    $23.99

    $117.90

    $103.75

    NCY Racing Big Valve Cylinder Head 2 valve 61mm GY6 171cc 171 NCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6 NCY TRS CALIPER ADAPTER 2 PISTON CALIPER
    NCY Racing Big Valve Cylinder Head 2 valve 61mm GY6 171cc 171NCY Brake Cable for ALL Frame Extension Kits Honda Ruckus +6 NCY TRS CALIPER ADAPTER 2 PISTON CALIPER

     This head will allow your cylinder to breathe better! Works great with our 61mm cylinder assembly. And you're wondering how can this get even better, right? Check out these Stainless Steel racing Valves to go with your new top end.

    Replacement brake cable for the following Honda Ruckus frame extension kits: 0300-0012 PASSWORD EXTENSION Overall length: 87"

     

    NCY caliper adapter. Looking to run RRGS, DIO or NCY fork but don't want to spend a fortune on Brake set up. This bracket fits on most aftermarket NCY and RRGS forks and allows you run a NCY

     

     

     

    $134.00

    $120.60

    $20.99

    $16.79

    $30.00

    $25.50

    NCY Clutch Springs (1000 RPM); GY6 blue NCY Clutch Springs (1500 RPM); GY6 YELLOW NCY Clutch Springs (2000 RPM); GY6 RED
    NCY Clutch Springs (1000 RPM); GY6 blueNCY Clutch Springs (1500 RPM); GY6 YELLOWNCY Clutch Springs (2000 RPM); GY6 RED

    Get better acceleration on your GY6 by upgrading your clutch springs! 1000 RPM NCY clutch springs, set of 3. Clutch springs help determine the RPM that the clutch will engage at. NOTE: THESE ARE FOR GY6 NOT THE HONDA RUCKUS 49CC. GY6 SPRINGS NO...

    Get better acceleration on your GY6 by upgrading your clutch springs! 1500 RPM NCY clutch springs, set of 3. Clutch springs help determine the RPM that the clutch will engage at. NOTE: THESE ARE FOR GY6 NOT THE HONDA RUCKUS 49CC. GY6 SPRINGS NO...

    Get better acceleration on your GY6 by upgrading your clutch springs! 2000 RPM NCY clutch springs, set of 3. Clutch springs help determine the RPM that the clutch will engage at. NOTE: THESE ARE FOR GY6 NOT THE HONDA RUCKUS 49CC. GY6 SPRINGS NO...

    $7.50

    $7.12

    $7.50

    $6.75

    $7.50

    $7.12

    NCY Coated Variator (115mm/Gold color); Genuine 125/150/GY6 NCY Compression Spring (GY6), 1000 rpm NCY Compression Contra Spring (GY6), 1500 rpm
    NCY Coated Variator (115mm/Gold color); Genuine 125/150/GY6NCY Compression Spring (GY6), 1000 rpmNCY Compression Contra Spring (GY6), 1500 rpm

    The ultimate variator for your GY6 transmission! This beauty is lighter than any other variator on the market and at 115mm, is ideal for all types of riding. The teflon coated roller tracks prevent debris accumulation that causes roller weights...

    Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm...

    Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1500rpm spring will go into a higher gear than a 1000rpm...

    $69.00

    $58.65

    $14.00

    $12.60

    $15.00

    $13.50

    NCY Compression Spring (GY6), 2000 rpm NCY Cylinder Gasket Set Sizes 57.4mm  58.5mm  61mm 63mm  GY6 NCY Drive Face (Aluminum);Genuine/GY6
    NCY Compression Spring (GY6), 2000 rpmNCY Cylinder Gasket Set Sizes 57.4mm 58.5mm 61mm 63mm GY6 NCY Drive Face (Aluminum);Genuine/GY6

    Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm...

    NCY Replacement cylinder gaskets for GY6 stock 57.4 all the way to a 63mm big bore kit. NCY Gasket kit. Quality replacement part.

    Choose size using drop down.

     

    High quality aluminum drive by NCY for Genuine & GY6 150cc scooters Applies to the following models: Baccio VX150 150 Baron 150-S Sport 150-VLA Classic BMS Heritage 150 Romans 150 Fly Scooters Rio 150 Genuine Blur 150 Buddy 125 Buddy 150...

    $14.00

    $12.60

    $12.99

    $12.34

    $24.99

    $21.99

    NCY Exhaust Pipe Nuts (8mm, Sold in Pairs) Gy6 big bore and Grom NCY Forged Brake Caliper 2 piston - black NCY NEOCHROME TITANIUM REAR AXLE NUT/ GY6
    NCY Exhaust Pipe Nuts (8mm, Sold in Pairs) Gy6 big bore and GromNCY Forged Brake Caliper 2 piston - black NCY NEOCHROME TITANIUM REAR AXLE NUT/ GY6

    Installing a big valve head on your GY6 or large diameter pipe? These nuts are essential. The smaller, 10mm diameter head allows for extra clearance between your wrench and the pipe for easy access.

    NCY FORGED 2 PISTON FRONT BRAKE CALIPER W/ PADS. YOU WILL NEED BANJO FITTING AND BANJO BOLT.

    High quality neochrome rear axle nut by NCY for GY6 engines. Brand: NCY Specs: M16x1.5P Fits: GY6 Engines

    $3.99

    $3.59

    $107.99

    $91.79

    $8.99

    $8.09

    NCY Oil Decompression Tube; Genuine,/GY6 TRS EGR PCV Block off Plate GY6 .25 stainless steel NCY Performance Brake Pads (Front)  Ruckus Zoomer
    NCY Oil Decompression Tube; Genuine,/GY6TRS EGR PCV Block off Plate GY6 .25 stainless steelNCY Performance Brake Pads (Front) Ruckus Zoomer

    Decompression tubes replace your dipstick and allow excess crank case pressure to be released. We recommend installing these tubes along side any cylinder kit.

    PCV block off plate used for removing PCV system on GY6 engines. Most GY6 scooters have sub-par PCV systems often causing massive vacuum leaks that lead to poor performance. When installing this block off plate, it is highly recommended you...

    Performance NCY front brake pads for Genuine Buddy 50.  The pad compound is long-wearing and ensures the best stopping power for your Buddy.

    These also work with the NCY Honda Ruckus front end kits.

    $14.00

    $13.02

    $11.99

    $9.59

    $20.99

    $18.89

    NCY PERFORMANCE SHOCK BLACK NCY Racing Brake Rear Drum Shoes (Blue) GY6 150cc+ NCY Racing Clutch ( Buddy 125/ 150 GY6 ) Gen 4
    NCY PERFORMANCE SHOCK BLACKNCY Racing Brake Rear Drum Shoes (Blue) GY6 150cc+NCY Racing Clutch ( Buddy 125/ 150 GY6 ) Gen 4

    High-quality, NCY-built rear performance shock for Honda's Ruckus improves ride, handling, and looks great - this part is sure to improve your Ruckus and finish your custom build in style! Measurements:

    PERFORMANCE REAR GY6 BRAKE SHOES BY NCY. HAS VENTED SHOES TO PREVENT GLAZING.

     

    Very nice quality racing clutch 4th GEN. WITH 1500 SPRINGS by NCY for GY6 scooters NOT A CHINESE RACE CLUTCH THAT THE PADS COME OFF ON MADE IN TAIWAN THE BEST OF THE BEST. This is the upgraded version of the blue, third generation racing clutch....

    $109.00

    $100.28

    $20.99

    $18.89

    $65.99

    $56.09

    NCY Stroker Crankshaft (+2.5 mm stroke) GY6 Free shipping to 48 NCY Turbo Fan ORANGE WHITE OR CHROME GY6 NCY UNIVERSAL CNC KEY HEAD  3 COLORS
    NCY Stroker Crankshaft (+2.5 mm stroke) GY6 Free shipping to 48 NCY Turbo Fan ORANGE WHITE OR CHROME GY6 NCY UNIVERSAL CNC KEY HEAD 3 COLORS

    NCY high performance stroker crank for GY6/Buddy 150/Blur. Increases standard stroke by 2.5mm, more displacement equals more power! MUST SPLIT CASE TO INSTALL

    Turbo fan in ORANGE, WHITE OR CHROME for Honda/GY6 scooter engines. FITS BOTH GY6 50 AND 150 CC MOTORS

    NCY KEY HEAD IN GOLD, RED OR GUN METAL GRAY. NICE LITTLE ADDITION TO YOUR HONDA RUCKUS OR MET.

    NOTE: YOU MUST GRIND OFF TOP OF KEY TO FIT INSIDE SLOT. HAS SET SCREW.

    $200.00

    $170.00

    $16.00

    $14.40

    $14.99

    $12.74

    NGK CR7HIX Iridium Spark Plug GY6 NGK CR7HSA Spark Plug NO REV LIMIT GY6 AC CDI
    NGK CR7HIX Iridium Spark Plug GY6NGK CR7HSA Spark PlugNO REV LIMIT GY6 AC CDI

    Got a Big Bore Kit or any performance mods you need better spark. This plug is one of the first mods that needs to be done.

    STOCK NGK PLUG FOR GY6 Thread Size: 10mm Reach: 12.7mm (1/2 inch) Hex Size: 16mm (5/8 inch) Gap: 0.7mm (.028 inch) Heat Range: 7 Does not include terminal nut

    No Rev Limit Performance CDI with Alternating Current for 150cc and 125cc 4-stroke GY6 engines. This Performance CDIs special design removes the RPM limiter and increases firing speed at higher speeds. Please see our Warranty & Returns Policy.

    $11.00

    $10.78

    $3.25

    $39.99

    OTTO FACTORY GY6 License Plate Mount  (Two mounting Points) PARTS BY  MAX 2mm STACKABLE SPACER FOR GY6 HUB TRS Ruckus Fender Washer Dress-up Kit for Battery Box  3 colors
    OTTO FACTORY GY6 License Plate Mount (Two mounting Points)PARTS BY MAX 2mm STACKABLE SPACER FOR GY6 HUBTRS Ruckus Fender Washer Dress-up Kit for Battery Box 3 colors

    OTTO FACTORY GY6 License Plate Mount with all hardware. Can be mounted Vertical or horizontal. Powder Coated in Black with Stainless Hardware. Mounts on the GY6 CVT case and allows you to run your plate 6 different ways. If you like it vertical...

    2mm stackable positive offset spacer for gy6 hub. USE THESE TO CENTER YOUR WHEEL OR TO OFFSET HUB SO AFTERMARKET WHEELS CAN CLEAR AXLE.

    $10 EACH SHIPS FREE 

    FINALLY! A Battery Box Washer Kit that fits with the right size bolts and washers. Add that last finishing touch to your project with these all new TRS battery box dress up kit! Each kit includes 4 x 5mm washers, 3 x6mm washers and stainless...

    $34.99

    $29.74

    $10.00

    $9.00

    $15.75

    $14.17

    Performance Clutch Hub Drum Gy6 - FIVE BLADE Performance Clutch Hub Drum Gy6 - SNOWFLAKE Performance GY6 ignition Coil
    Performance Clutch Hub Drum Gy6 - FIVE BLADEPerformance Clutch Hub Drum Gy6 - SNOWFLAKEPerformance GY6 ignition Coil

    After-Market Clutch Bell/Drum Type-1 for 150cc and 125cc 4-stroke GY6 engine based scooters, ATVs and off-road karts. Number of Splines: 19 Overall Inner Diameter: 125mm Overall Outer Diameter: 137mm Splined Inner Diameter (peak to peak): 13.5mm

    After-Market Clutch Bell/Drum Type-1 for 150cc and 125cc 4-stroke GY6 engine based scooters, ATVs and off-road karts. Number of Splines: 19 Overall Inner Diameter: 125mm Overall Outer Diameter: 137mm Splined Inner Diameter (peak to peak): 13.5mm

    Igntion Coil with a single attachment for 150cc and 125cc GY6 Engine based scooters and vehicles. Please see our Warranty & Returns Policy.

    $34.99

    $31.49

    $33.99

    $30.59

    $15.00

    $12.00

    Premium Exhaust Gasket Set PWK  Genuine  OKO 28MM - 30MM SLIDE Transparent Float Bowl RRGS / ADELIN 4 PISTON BIG BRAKE KIT 3 COLORS
    Premium Exhaust Gasket SetPWK Genuine OKO 28MM - 30MM SLIDE Transparent Float BowlRRGS / ADELIN 4 PISTON BIG BRAKE KIT 3 COLORS

    This Premium Exhaust Gasket Set includes a premium metal gasket, 2 stainless steel exhaust studs and 2 stainless steel exhaust cap nuts. Please select Exhaust Stud diameter from drop down menu.

    This OKO clear fuel bowl is made to be used with PWK type carburetors. The clear fuel bowl aids in tuning as you can easily check the fuel level, make sure float levels are at the right height and check for debris or sediment in your fuel.

    HAVE YOUR OWN FORKS BUT ARE LOOKING FOR 4 PISTON BRAKES. RRGS OR ADELIN (WHATEVER WE HAVE IN STOCK) CALIPER BRACKET,220MM FLOATING ROTOR, TITANIUM ROTOR BOLTS , 4 PISTON ADELIN CALIPER W/ PADS (BLACK, SILVER, OR RED)

    $14.99

    $17.99

    $16.19

    $260.00

    $208.00

    RRGS DRAG FRONT FORKS RUCKUS GY6  BLACK (DISC) SHIPS FREE TRS DRAG LOW DOWN  FRONT FORKS RUCKUS ( RRGS GY6) 2 COLORS RUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA
    RRGS DRAG FRONT FORKS RUCKUS GY6 BLACK (DISC) SHIPS FREETRS DRAG LOW DOWN FRONT FORKS RUCKUS ( RRGS GY6) 2 COLORSRUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA

    RRGS Ruckus Low Down Front Forks The RRGS Drag Forks measure 3" shorter then the normal ncy, atr, rrgs and its about 1" shorter then the KN Low Down Forks. Custom drag forks are great for lowering your scooter without cutting springs and...

    TRS Ruckus Low Down Front Forks The TRS Drag Forks measure 3" shorter then the normal ncy, atr, rrgs and its about 1" shorter then the KN Low Down Forks. Custom drag forks are great for lowering your scooter without cutting springs and...

    TIRED OF ROCKING THAT LONG FRONT BRAKE CABLE WHEN YOU LOWER YOUR SHOCK FORKS? WE FIXED THAT. CUSTOM MADE FOR THE RUCK SHOP 39 INCH SHORT FRONT BRAKE CABLE TRUE 39 INCES.

     

    $225.00

    $202.50

    $225.00

    $191.25

    $30.99

    Single Light: Black LED 60mm Anti-Vibe Post Mount  FREE SHIPPING SLIDE CARB CABLE ADJUSTMENT FITTING Teflon Coated Intake Manifold (GY6) ; NCY FREE SHIPPING TO 48 ST
    Single Light: Black LED 60mm Anti-Vibe Post Mount FREE SHIPPINGSLIDE CARB CABLE ADJUSTMENT FITTINGTeflon Coated Intake Manifold (GY6) ; NCY FREE SHIPPING TO 48 ST

    Black LED Light with anti-vibe post mount (replacement light for Trail Tech brackets, does not include rubber grommet.) use this the Composimo LED mount Feature Description Brightness Modes 3 (Hi - Med - Lo) Brightness 1050 Lumens (Hi mode) Beam...

    Did you brake yours and can't find them. We got them in stock ready to ship.

    NCY intake manifolds offer a smooth bore and larger inlet diameter over stock. Combined, these two assets allow more air and more fuel into your cylinder, giving you more power. Intake manifold upgrades are a must for larger carburetors. It...

    $99.99

    $89.99

    $2.99

    $32.99

    OKO Teflon Coated SHORT Intake Manifold (GY6) 30MM The Ruck Shop  Main jet for PWK Carb CHOOSE SIZE THE RUCK SHOP / I RUCK ON THE FIRST DATE key fob
    OKO Teflon Coated SHORT Intake Manifold (GY6) 30MM The Ruck Shop Main jet for PWK Carb CHOOSE SIZETHE RUCK SHOP / I RUCK ON THE FIRST DATE key fob

    OKO intake manifolds offer a smooth bore and larger inlet diameter over stock. Combined, these two assets allow more air and more fuel into your cylinder, giving you more power. Intake manifold upgrades are a must for larger carburetors. It...

    PWK main jet that you need when running slide carb. Stock jets in carb are too big for GY6 motors or BBK. Keihin Hex Main Jet Thread Size: M5x0.80 Overall Length: 16.5mm

    THE RUCK SHOP KEY FOB ONE SIDE SAYS: I RUCK ON THE FIRST DATE OTHER SIDE : THERUCKSHOP.COM PERFECT FOR YOUR RUCKUS OR MET KEYS. COMES IN BLACK, RED, OR PINK

    $29.99

    $23.99

    $2.99

    $2.84

    $2.99

    The Ruck Shop pilot slow jet for PWK  Slide Carb TRAILTECH VAPOR SPEEDO CABLE FOR DISC BRAKE TRS Sidewinder Headlight Bracket and 60mm LED Trailtech light
    The Ruck Shop pilot slow jet for PWK Slide CarbTRAILTECH VAPOR SPEEDO CABLE FOR DISC BRAKETRS Sidewinder Headlight Bracket and 60mm LED Trailtech light

    PWK pilot / idle jet that you need when running slide carb. Stock jets in carb are too big for GY6 motors or BBK.

    CHOOSE YOUR SIZE 35 OR 32


       Keihin Round Idle Jet
    Thread Size: M6x0.75
    Overall Length: 28mm

    THIS CABLE MAKE INSTALLATION CLEAN. WILL REQUIRE YOU TO DRILL AND TAPE YOUR BRAKE CALIPER MOUNT AND GLUE MAGNET TO ROTOR. WILL NEED USUALLY ONLY FOR SINGLE PISTON CALIPER LIKE ON NCY FRONT KIT IF YOU HAVE A RRGS DUAL PISTON CALIPER YOU WILL NOT...

    Looking to mount a single Trailtech LED headlight to your Ruckus forks, but you're too low? This is THE setup you NEED! It allows the best mounting of the Trailtech LED headlight on your Honda Ruckus no matter how low you are! The mount is...

    $3.99

    $3.79

    $29.95

    $150.00

    $135.00

    TRS  Stainless Steel GY6 Starter Motor Cover  2 colors TRS 407'S 2 PIECE 12X5 REAR WHEEL RUCKUS HUB INCLIDED TRS 6MM CNC FENDER WASHERS WITH BOLTS - GOLD AND RED ONLY
    TRS Stainless Steel GY6 Starter Motor Cover 2 colors TRS 407'S 2 PIECE 12X5 REAR WHEEL RUCKUS HUB INCLIDED TRS 6MM CNC FENDER WASHERS WITH BOLTS - GOLD AND RED ONLY

    Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers. 

    TRS 2 PIECE 12X5 3+2 OFFSET WITH 4/140 BOLT PATTERN. PERFECT FOR THE RUCKUS MOTOR. FREE KYMCO REAR HUB  INCLUDED HAS HUB CAP TO CLEAR AXLE AND NUT ON HUB. CAP IS ATTACHED WITH BOLTS FROM THE REAR NOT AN O-RING.

    The TRS Fender Washer Kits include (5) 6Mx20 stainless steel bolts and 5 washers. The fender washers will fit any 10mm bolt hole under the hood of your Honda or Ruckus. The 6Mx20 bolts is recommended for all parts under your hood such as...

    $49.99

    $44.99

    (1)

    $499.00

    $424.15

    $15.00

    $12.00

    TRS ALL IN ONE GY6 MANIFOLD RISER ANGLED CLOCKING FLANGE 56MM V2 TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS TRS BATTERY BOX FUEL / LIGHT BLOCK OFF BLACK OR RAW
    TRS ALL IN ONE GY6 MANIFOLD RISER ANGLED CLOCKING FLANGE 56MM V2TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS TRS BATTERY BOX FUEL / LIGHT BLOCK OFF BLACK OR RAW

    The GY6 Intake Manifold Riser and angled clock flange all in one is here! V2 NOW COMES IN 30MM JUST IN CASE YOU WANT TO RUN BIG BORE HEAD No more 2 piece setups that need a gasket to seal. This Intake Manifold Riser can help you get a better fitment!

    RRGS / NCY FRONT HUB SPACER KIT THIS KIT IS TO CENTER WHEEL FOR AFTERMARKET FRONT HUB NORMALLY USED WITH DOUGLAS, TRS, OR OTHER RUCKS WHEELS. YOU MAY HAVE TO ADD (USING WASHER) OR REMOVE (FILE) A COUPLE THOUSANTH OFF THE SPACER AS WE HAVE NO...

    NOT USING THE FUEL OR HIGH BEAM LIGHT FOR GY6 SWAPS? TRS HAS INTRODUCED THE SOLUTION. YOU NEED THE PLASTIC LED HIGH BEAM / FUEL LIGHT TO KEEP THE RIDGIDNESS FOR THE BATTERY BOX, THIS IS WHY MANY GY6 SWAPS HAVE BROKEN BOX TABS BECAUSE THEY REMOVE...

    $64.99

    $59.79

    $19.99

    $18.79

    $39.99

    $33.99

    TRS BATTERY BOX FUEL / LIGHT BLOCK OFF W/ START BUTTON SWITCH TRS Billet Aluminum Frame Caps Plugs  - 11 Styles ON SALE NOW TRS Billet Aluminum Manual CAM Timing Chain Tensioner  GY6
    TRS BATTERY BOX FUEL / LIGHT BLOCK OFF W/ START BUTTON SWITCHTRS Billet Aluminum Frame Caps Plugs - 11 Styles ON SALE NOWTRS Billet Aluminum Manual CAM Timing Chain Tensioner GY6

    LOOKING FOR A CLEAN PLACE FOR A START BUTTON? TRS HAS INTRODUCED THE SOLUTION. YOU NEED THE PLASTIC LED HIGH BEAM / FUEL LIGHT TO KEEP THE RIDGIDNESS FOR THE BATTERY BOX, THIS IS WHY MANY GY6 SWAPS HAVE BROKEN BOX TABS BECAUSE THEY REMOVE THIS...

    Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly...

    TRS GY6 cam chain billet manual adjuster. Are you running a big Bore Kit with a oversize Crank? If so normally you need a longer chain and stock GY6 auto adjuster just doesn't work. Or maybe your tensioner is just wore out. Made in USA. Comes...

    $49.99

    $44.99

    $28.00

    $22.40

    $44.99

    $40.49

    TRS FORWARD FOOTREST PEG LEGS FOR  HONDA RUCKUS MADE IN USA TRS FUEL  HOSE LINE 3/16" X 3 FT LONG SECTION TRS GY6 150cc Aluminum Spacer Gasket  for Stroker Cranks
    TRS FORWARD FOOTREST PEG LEGS FOR HONDA RUCKUS MADE IN USATRS FUEL HOSE LINE 3/16" X 3 FT LONG SECTION TRS GY6 150cc Aluminum Spacer Gasket for Stroker Cranks

    The TRS FORWARD FOOTREST is a great addition to your ruckus for that extra leg room. Great for riders who are taller or want another leg position. Attaches to side of frame.

     3/16" FUEL LINE 3 FT LONG Transparent Polyurethane Fuel Line

    TRS Line is a premium polyurethane , 85 durometer, which provides for superior abrasion, kink, tear, oxidation and chemical resistance.

    LIGHT BLUE TRANSPARENT

    TRS 2.2mm, 7.9mm or 8.2mm Stroker Crankshaft Spacer for 54mm stud A-Case Cylinder Stud Spacing which is the motor we sell and most common. Use the 2.2mm for the NCY 2.2 or 2.5 stroker crank and 7.9 or 8.2mm for 8.2 crank. Remember you have head...

    $65.00

    $58.50

    (1)

    $9.99

    $8.99

    $27.99

    $25.19

    TRS Honda  Ruckus / Zoomer Ultimate CNC Handlebar Black v2 TRS RUCKUS CUSTOM SEAT COVERS BRIDE RECARO DIAMOND AND MORE TRS HONDA Ruckus Met Key Ignition Billet Cover  2 STYLES
    TRS Honda Ruckus / Zoomer Ultimate CNC Handlebar Black v2TRS RUCKUS CUSTOM SEAT COVERS BRIDE RECARO DIAMOND AND MORE TRS HONDA Ruckus Met Key Ignition Billet Cover 2 STYLES

    The TRS ULTIMATE BAR Setup... It's The Ultimate Ruckus Steering System. Period! That's it!!! That's the name... That's what it is... You won't find a cleaner looking integrated handlebar and stem combo from anywhere else. We here at THE RUCK SHOP...

     TRS NOW OFFERS CUSTOM SEAT COVERS. ALL YOU NEED TO DO IS REMOVE YOU OLD SEAT COVER AND INSTALL with Staple Gun. (We recommend Electric or Air Staple gun). Limited Styles. At this time we do not offer custom one off's seats.

     Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock.
    CNC Machined out of 6061 Billet Aluminum

    $399.00

    $371.07

    $125.00

    $105.00

    (1)

    $39.99

    $31.99

    TRS HONDA RUCKUS STEM NECK ALLOWS SPEEDO BLINKER LIGHT TRS MINI RACHET WRENCH SET TRS NCY DIRECT IGNITION HOLDER FOR GY6 MOTORS
    TRS HONDA RUCKUS STEM NECK ALLOWS SPEEDO BLINKER LIGHTTRS MINI RACHET WRENCH SET TRS NCY DIRECT IGNITION HOLDER FOR GY6 MOTORS

    TRS OLDSCHOOL TOP CLAMP NECK FOR HONDA RUCKUS. ALLOWS THE USE OF THE STOCK SPEEDO AND TURN SIGNAL INDICATOR. THIS IS FOR 7/8 BARS. CNC BILLET AND ANODIZED BLACK AND STAINLESS PLATE. COMES WITH ALL HARDWARE. Installation notes: Remove blinker lens...

    17-piece kit fits just about anywhere and packed full of essential bits PERFECT FOR YOUR RUCKUS OR MET. Quality ratchet and bits made from tool steel Comes with 5 cross head, 3 flat head, 2 torx head, 5 sockets and extension

     

    Are you running a NCY Direct ignition and always breaking the little spring inside or your bracket is broken like below? NEW TRS Billet 6160 Direct Ignition holder keeps the coil in place and mounts in between the plastics. Just loosen the 2...

    $100.00

    $90.00

    $9.99

    $22.00

    $19.80

    TRS RRGS NCY DRUM ADAPTER NOW IN BILLET 6061 ALUMINUM 2 COLORS TRS Ruckus BILLET Handlebar Stem neck  7/8  3 Styles TRS RUCKUS REAR FRAME LICENSE PLATE MOUNT 4 COLORS SHIPS FREE
    TRS RRGS NCY DRUM ADAPTER NOW IN BILLET 6061 ALUMINUM 2 COLORSTRS Ruckus BILLET Handlebar Stem neck 7/8 3 Styles TRS RUCKUS REAR FRAME LICENSE PLATE MOUNT 4 COLORS SHIPS FREE

    Looking to run RRGS, Adelin, TRS or NCY front forks but wanna keep the OEM drum brakes. We have a fix for ya. Simple bolt on bracket with all the hardware and spacers included. These are now in Billet 6061

    What makes our stem different from all the others? Where is the steering tube? Say goodbye to home made hacks and shim kits to get your BMX style stem to fit, THE RUCK SHOP Billet Aluminum Steering Stem is a direct swap for the stock handlebar. 

    Got a new ruckus but don't like that big tail light assemble and you want to remove it but don't want the grind marks showing. We got the answer. The TRS mount hides the grind marks

    $49.99

    $42.49

    $74.99

    $69.74

    $82.00

    $73.80

    TRS Stage 6 to CVK Carburetor Throttle Cable 75 INCH USA TRS TRANSFORMER HANDLE BARS 7 COLORS 7/8 RUCKUS GROM Uni Filter Clamp-On Dual Layer Pod Air Filter ID 1.75 STRAIGHT
    TRS Stage 6 to CVK Carburetor Throttle Cable 75 INCH USATRS TRANSFORMER HANDLE BARS 7 COLORS 7/8 RUCKUS GROMUni Filter Clamp-On Dual Layer Pod Air Filter ID 1.75 STRAIGHT

    TRS Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. TRS Throttle SSP to CVK throttle cable will also work...

    EVER GET TIRED OF THE SAME STYLE HANDLE BARS? WITH THE NEW TRS TRANSFORMER BARS YOU CAN USE YOUR IMAGINATION WITH OVER 50 DIFFERENT STYLES TO CREATE!! AVAILABLE IN ANODIZED BLACK, RED, LIME GREEN, GUN METAL, SILVER, ORANGE, AND BLUE. EACH SET...

    Straight
        Urethane Flange
        Inner Diameter: 1 3/4 inches
        Outer Diameter: 3½ inches
        Overall Length: 4.6 inches

    $37.00

    $33.30

    $99.00

    $87.12

    (1)

    $18.00

    $16.20

    UNIVERSAL 35MM  CLIP ONS BARS SILVER OR BLACK YOSHIMURA CARBON GY6 CUSTOM FATTY EXHAUST V2  FREE SHIP YOSHIMURA CARBON RS-9 FULL CARBON V2 EXHAUST FOR GY6
    UNIVERSAL 35MM CLIP ONS BARS SILVER OR BLACK YOSHIMURA CARBON GY6 CUSTOM FATTY EXHAUST V2 FREE SHIP YOSHIMURA CARBON RS-9 FULL CARBON V2 EXHAUST FOR GY6

    Universal Clip on Handlebars 35mm in 7/8. Perfect for our TRS OG HANDLEBARS . This bars allow you to adjust your pullback and your angle. So many combinations for every riders feel.

    Custom GY6 Genuine Yoshimura Exhaust with Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL bracket for Fatty 12x7 or 12x8 tire. Comes with all mounting hardware and exhaust plug.

    TRS Custom GY6 Genuine Yoshimura RS-9 FULL CARBON Exhaust with Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL bracket for Fatty 10 inch 12x7, 12x8 or 13" tire. Comes with all mounting...

    $59.99

    $53.99

    $429.99

    $408.49

    $575.00

    YOSHIMURA CARBON RS-9 STAINESS/ CARBON CAP EXHAUST FOR GY6 V3 YOSHIMURA STAINLESS TRS COMP SERIES GY6 FATTY CUSTOM EXHAUST
    YOSHIMURA CARBON RS-9 STAINESS/ CARBON CAP EXHAUST FOR GY6 V3YOSHIMURA STAINLESS TRS COMP SERIES GY6 FATTY CUSTOM EXHAUST

    TRS Custom GY6 Genuine Yoshimura RS-9 STAINLESS WITH CARBON CAP Exhaust with Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL

    Tired of same ol' stuff get our Custom GY6 Genuine Yoshimura TRS COMP SERIES Stainless Exhaust with Stainless header PROFESSINALLY TIG welded non of this home garage welding crap. With custom STAINLESS STEEL bracket for Fatty 12x7 or 12x8 tire.

    $489.00

    $440.10

    $429.99

    $399.89

    1 - 254 of 254 items