ACCESSORIES

 
     
    1 - 152 of 152 items
    TRAILTECH VAPOR HANDLEBAR STEM WORKS ON TRS OR PASSWORD JDM 12V  Battery Tender Junior Charger 3/16" Inline Fuel Filter - Opaque
    TRAILTECH VAPOR HANDLEBAR STEM WORKS ON TRS OR PASSWORD JDM 12V Battery Tender Junior Charger3/16" Inline Fuel Filter - Opaque

    TRS Trailtech Vapor Handlebar Stem is made from 6061 and Hard Anodized. Fits all Existing TRS stems. Comes either Complete or face and Cup. FEATURES: 15 degree angle for easy viewing of LCD Works on all TRS stems

    The Battery Tender Junior Charger is much more than a trickle charger. It is lightweight, compact, fully automatic and very easy to use especially in small spaces. The car trickle charger chargers offers ideal solution for keeping your vehicle...

    3/16" In-Line Fuel Filter with New & Improved Case for more durable design. Used on Scooters, Motorcycles, ATVs, Dirt Bikes, Go-Karts, Dune Buggies and much more. Body Diameter: 22mm Hose End Diameter: 6.8mm (1/4 Inch)

    $125.00

    $115.00

    $39.95

    $35.95

    $0.99

    $0.97

    7/8'' Universal 3 function Horn, Turn and light switch 75" Throttle Cable for CVK Carb on Ruckus or GY6 w/ adjuster USA Biltwell Torker Grips - Black 7/8
    7/8'' Universal 3 function Horn, Turn and light switch 75" Throttle Cable for CVK Carb on Ruckus or GY6 w/ adjuster USABiltwell Torker Grips - Black 7/8

    This Switch is Small in size does not take up much room on your bars, It can be easily mounted over your existing clutch lever perch to save space. It is Lightweight perfect with other accessories as it is compact the width is 3/8 Inches only!...

    Throttle cable with a 76" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb. This is the most popular cable lenght used for Honda

    Biltwell grips are available in 7/8” ”. Each size number refers to the outside diameter of the bar end on the left side of your scooter. If you don’t know the O.D. of your handlebars, measure with a caliper, an open-end wrench...

    $10.99

    $10.44

    $22.00

    $20.90

    $17.95

    $16.15

    Black Fiberglass Gas Tank Cover Honda Ruckus Zoomer SHIPS FREE Chase Harper Honda Ruckus Under The Seat Storage Bag SHIPS FREE CNC Billet lever for Disc Rear Brake LEFT SIDE ONLY BLACK
    Black Fiberglass Gas Tank Cover Honda Ruckus Zoomer SHIPS FREEChase Harper Honda Ruckus Under The Seat Storage Bag SHIPS FREE CNC Billet lever for Disc Rear Brake LEFT SIDE ONLY BLACK

    Fiberglass Gas Tank Cover for the Honda Ruckus Brand Scooter. Use this to cover up your stock gas tank when stock floorboard is removed. FREE SHIPPING 

    Made specifically for the Honda Ruckus. Honda's Ruckus is an in-your-face, bare bones little goat of a utility cycle. The addition of Chase Harper USA's Under the Seat Bag really helps bring that utility aspect to bear. With it's tough Industrial...

    CNC Billet control CRG Style Top Quality with DUAL MASTER CYLINDERS for DISC FRONT AND REAR BRAKE WITH BRAKE SIGNAL SWITCHES.  SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN

    $56.99

    $54.14

    $88.00

    $83.60

    (1)

    $87.50

    $78.75

    DC 12V LED Digital Display Voltmeter Waterproof BLUE GY6  2.8mm  6.3mm Connector Kit  338 pieces HONDA RUCKUS GROM FRONT FENDER W/ BRACKET & HARDWARE
    DC 12V LED Digital Display Voltmeter Waterproof BLUE GY6 2.8mm 6.3mm Connector Kit 338 piecesHONDA RUCKUS GROM FRONT FENDER W/ BRACKET & HARDWARE

    Got a GY6 and ever wonder if the battery is charging. Don't get caught stranded. Know for sure what the charging system is putting out. Your scooter should be 12.8v to 14.0V when cruising. It works for 12V-24V.Mini size and easy to install,work...

    GY6 Connector Kit includes the following. 20 Short Green Protectors 20 Long Green Protectors 5 - 6 Pin Male Connector 2.8mm 5 - 6 pin Female Connector 2.8mm 10 - 4 Pin Male Connector 2.8mm 10- 4 pin Female Connector 2.8mm 10 - 2 pin Female...

    Tired of getting water in your face. We have the solution. OEM Honda Grom in either Black or Pearl White Fender along with our High Gloss Black Powdercaoted Stainless brackets and all the hardware that allow you to run this fender. Fills that gap...

    $9.50

    $8.55

    $24.99

    $22.49

    (1)

    $95.00

    $90.25

    Honda Ruckus Lowered Seat Frame Gloss Black or White HONDA RUCKUS TANK COVER WASHER KIT 3 COLORS FREE SHIPPING 6mm K & S Black or Stainless Steel LED License Plate Mounting Bolts
    Honda Ruckus Lowered Seat Frame Gloss Black or White HONDA RUCKUS TANK COVER WASHER KIT 3 COLORS FREE SHIPPING 6mmK & S Black or Stainless Steel LED License Plate Mounting Bolts

    Lowered Seat Frame for the Honda Ruckus. Lowers Seat by 3-1/8" (80mm) Uses Existing Hardware Made in Taiwan High Gloss Black or Gloss White

     Tired of cracking your tank cover plastics. Get rid of those honda Clips and use our Tank Washer with bolt and Nylock Nuts. Each pack comes with 4 CNC aluminum T-6160 Bilet washers and 4 m6x25mm stainless socket cap bolts and nylock nuts

    K & S Black Stainless Steel LED License Plate Mounting Bolts - License plate mounting bolts in a hex shape LED light in the center of each bolt Constant light to license plate; does not flash Sold in pairs comes in either black or stainless...

    $99.99

    $91.99

    $9.99

    $9.49

    $23.50

    $22.32

    (1)
    KICKSTAND FOR LOWERED HONDA RUCKUS ZOOMER MADE IN USA SHIPS FREE LED FLASHER 552 MADE IN USA Led Turn Signal Set, Universal Fit. BLACK
    KICKSTAND FOR LOWERED HONDA RUCKUS ZOOMER MADE IN USA SHIPS FREELED FLASHER 552 MADE IN USA Led Turn Signal Set, Universal Fit. BLACK

    This compact kickstand design is made for your lowered Honda ruckus. Simple from the outside yet in contains a spring loaded ball bearing locking mechanism on the inside. Powder Coated Gloss black and Made 100% in America.

    If you have stock signals up front, this is all you need for Rear LED blinkers or TurtleHead. LED Blinkers at both front and rear require the TRS MET ZOOMER FLASHER

    UNIVERSAL LED TURN SIGNALS 8mm Bolt SET OF TWO: Right + Left Low Power Consumption 12V 1W High Quality, Weather Sealed. Light Color: Amber LED Body: ABS Plastic, Flat Black Body. - See more at:...

    $84.00

    $71.39

    $4.99

    $15.95

    $14.35

    LEFT SIDE REAR LEVER SWITCH AND BRACKET FOR CNC ADELIN LEVERS M10 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS M6 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS
    LEFT SIDE REAR LEVER SWITCH AND BRACKET FOR CNC ADELIN LEVERS M10 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS M6 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS

    All you riders with CNC levers and No Left hand switch we now have the solution in our PATENT PENDING Ruckus CNC Left hand switch. Comes with everything you need to install a left switch on your CNC levers. Fits Adelin and most other CNC Clutch...

    We know not everyone has a local hardware store with a good selection of bolts, or you lose a bolt, or maybe you just want to upgrade your bolts. We got you covered. We are now offering M6 Stainless Steel Bolts , nuts, and washers. Get as many or...

    We know not everyone has a local hardware store with a good selection of bolts, or you lose a bolt, or maybe you just want to upgrade your bolts. We got you covered. We are now offering M6 Stainless Steel Bolts , nuts, and washers. Get as many or...

    $24.99

    $22.49

    $1.40

    $0.39

    M8 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS MOXI TAWIAN CNC HIGH QUALITY GRIPS 7/8 RED, SILVER AND BLACK NCY Throttle & Grip Set (Black, Bearing Style, 7/8")
    M8 METRIC STAINLES STEEL SOCKET CAP BOLTS NUTS AND WASHERS MOXI TAWIAN CNC HIGH QUALITY GRIPS 7/8 RED, SILVER AND BLACK NCY Throttle & Grip Set (Black, Bearing Style, 7/8")

    We know not everyone has a local hardware store with a good selection of bolts, or you lose a bolt, or maybe you just want to upgrade your bolts. We got you covered. We are now offering M6 Stainless Steel Bolts , nuts, and washers. Get as many or...

    IMPORTED SOFT RUBBER PERFORMANCE GRIPS 7/8 HANDLEBAR. CNC ALUMINUM VERY GOOD QUALITY AND HEAVY FOR ANTI-VIBRATION.  3 COLORS TO CHOOSE FROM:

    BLACK, SILVER AND RED

    Ditch your plastic-on-plastic throttle tube set up for this performance needle bearing throttle tube. How thoughtful! This throttle tube assembly works on any scooter with 7/8" diameter bars. Not for dual throttle cable setup

    $0.82

    $14.95

    $12.70

    $72.99

    $59.85

    (1)
    OTTO FACTORY GET Ruckus Motor License Mount (2 mounting Points) Ruckus / Zoomer Met Smoked Radiator Ghost Cover, 8 designs RUCKUS RAIN COVER FOR CUSTOM SEATS
    OTTO FACTORY GET Ruckus Motor License Mount (2 mounting Points)Ruckus / Zoomer Met Smoked Radiator Ghost Cover, 8 designsRUCKUS RAIN COVER FOR CUSTOM SEATS

    OTTO FACTORY GET License Plate Mount with all hardware. Can be mounted Vertical or horizontal. Powder Coated in Black with Stainless Hardware. Mounts on the GET CVT case and allows you to run your plate 12 different ways. If you like it vertical...

     Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers.

    PROTECT YOU CUSTOM SEAT COVER FROM THE RAIN AND SUN

    $34.99

    $29.74

    $24.99

    $22.49

    $48.00

    $43.20

    SOHC VTEC Valve Cover for Ruckus  / Zoomer Billet 2 colors THE RUCK SHOP VINYL STICKER 6.5 INCHES LONG 6 AVAILABLE COLORS TRS 100% Carbon Fiber Key Guard Honda Ruckus Zoomer Numbered
    SOHC VTEC Valve Cover for Ruckus / Zoomer Billet 2 colors THE RUCK SHOP VINYL STICKER 6.5 INCHES LONG 6 AVAILABLE COLORSTRS 100% Carbon Fiber Key Guard Honda Ruckus Zoomer Numbered

    We may come late to the party but we come in style. Introducing the Honda SOHC CNC Valve Cover. Made in the USA from 6061 Billet Aluminum. We cut, polish then use the same color wrinkle powdercoat as Honda. We know your Ruckus doesn't have VTEC...

    The Ruck Shop Vinyl sticker comes in Chrome, NeoChrome, Gold,Red, White or Black. 6.5 long x 2 tall. If you are ONLY getting a sticker this will ship in an envelope regular mail no tracking. Pictures are dulled down due to clear film. 3M vinyl UV...

    Finally back again. 100% Carbon Fiber MADE IN THE USA Key guard for the Honda Ruckus Zoomer 03-16. Each piece is buffed to a high shine and signed by Greyduck as well as serial numbered.

    $159.99

    $143.99

    $1.99

    $1.79

    $45.00

    $42.75

    TRS AXLE SPOOL 12mm axle MADE IN USA Fork Protector 3 colors TRS BOTTLE CAP V2 GAS CAP FOR RUCKUS & MET NO LOGO TRS GY6 STAINLESS FAN COVER FITS BOTH A AND B CASE  3 COLORS
    TRS AXLE SPOOL 12mm axle MADE IN USA Fork Protector 3 colors TRS BOTTLE CAP V2 GAS CAP FOR RUCKUS & MET NO LOGOTRS GY6 STAINLESS FAN COVER FITS BOTH A AND B CASE 3 COLORS

     We were tired of waiting for these to come in stock so we made our own. Fits all 12mm axles.. Made from 6061 Billet Aluminum right here in the USA. Comes in Raw, Anodized Black or Red

    TRS BOTTLE CAP NO LOGO Vented Gas Cap that fits both HONDA Ruckus and Metropolitan.This cap comes complete no need to swap parts from your OEM cap or break off tabs. It's ready to go. Unpack and put on. No more messing... ALL BILLET

    TRS GY6 FAN COVER IN 304 STAINLESS STEEL FIT BOTH GY6 A AND B CASE. COMES WITH STAINLESS 18-8 SCREWS. YOUR CHOICE OF RAW, POWDERED  GLOSS BLACK, MIRRORED POLISHED. MADE IN AMERICA ABOVE PIC IS GY6

    $34.99

    $27.99

    $69.99

    $62.99

    $19.99

    $16.99

    TRS HORIZONTAL LICENSE PLATE FRAME CNC 6061 ALUMINUM 2 WELDED TRS LIMITED EDITION REAR SPOILER CARBON VACUUM INFUSED USA MADE TRS LOGO WAFER SUNGLASSES BLACK UV400 PROTECTION
    TRS HORIZONTAL LICENSE PLATE FRAME CNC 6061 ALUMINUM 2 WELDEDTRS LIMITED EDITION REAR SPOILER CARBON VACUUM INFUSED USA MADETRS LOGO WAFER SUNGLASSES BLACK UV400 PROTECTION

    TRS CNC 6061 ALUMINUM LICENSE PLATE THAT IS TIG WELDED. HARD ANODIZED BLACK AND MADE HERE IN THE USA. YOU HAVE IT ALL LOOKING NICE SO DON'T FORGET THE LITTLE DETAILS. FITS GROM, RUCKUS , METROPOLITAN, AND GY6 SWAPS

    Everyone love Carbon Fiber. You want something no ones else has? Introducing TRS 100% Carbon Fiber rear Ruckus Spoiler. Our spoilers are made here in USA and vacuumed infused using the same technogy as F1 cars. There are NOT fiberglass with 1...

    TRS LOGO WAFER SUNGLASSES BLACK UV400 PROTECTION. PERFECT FOR RIDING. EVERYONE HAS ASKED FOR THESE BECUASE THEY ARE PERFECT RIDING GLASSES.

    $45.00

    $40.50

    $249.00

    (1)

    $4.99

    $4.74

    TRS Non-Slip PowderCoated  black 30oz Tumbler Cup Laser Etched TRS REAR GHOST FRAME COVER WORKS WITH FATTY MOUNTS 6061 CNC TRS Ruckus Billet Washer Dress up Kit Made in USA 3 COLORS
    TRS Non-Slip PowderCoated black 30oz Tumbler Cup Laser Etched TRS REAR GHOST FRAME COVER WORKS WITH FATTY MOUNTS 6061 CNC TRS Ruckus Billet Washer Dress up Kit Made in USA 3 COLORS

    Looking to keep your drink ice cold ? Our Double Wall Vacuum Insulated 30 oz. Cups fit most cup holders and are powdercoated in a non-slip powder and then laser etched with our TRS logo. BPA free and hold ice for 24 hrs. Like the Cup ?

    Fits Honda Ruckus 2003-2015 with or without fatty mount . Our design allows you to mount even if you have a popular fatty stretch extension kit. Made of 6061 BILLET aluminum for durability and machined right here in the USA, The TRS Rear Frame...

    Complete washer and bolt kit for your Honda Ruckus. This kit consists of 46 pieces Each set comes complete with: 6x Seat frame washers and bolts (Socket Cap Head M8) 4x Main frame washers and bolts (Socket Cap Head M10) 4x...

    $39.99

    $31.99

    $49.99

    $44.99

    (1)

    $59.00

    $53.10

    TRS Ruckus Eazy Rider CNC Forward Foot Rest Footrest with Pegs TRS Ruckus Side Steps Step Rails 6061 billet for NCY Tank Cover TRS SPIDER HEADLIGHT LOWERED BAR 30W CREE LED 03-16 RUCKUS
    TRS Ruckus Eazy Rider CNC Forward Foot Rest Footrest with Pegs TRS Ruckus Side Steps Step Rails 6061 billet for NCY Tank CoverTRS SPIDER HEADLIGHT LOWERED BAR 30W CREE LED 03-16 RUCKUS

     The TRS Eazy Rider Forward Foot Rest was made because other footrest failed.  Take a close look, you can actually put your feet on the pegs!!! We extended the foot pegs and gave them a cogged end design to help with foot slippage.

     To really set off the look of your Honda Ruckus after removing the OEM Floorboards, you need to use these Honda Ruckus Side Steps. They go hand-in-hand with the Honda Ruckus Frame Splitter.

    EVER WONDER HOW A SPIDER SEES AT NIGHT? WE DID. Introducing the TRS Spider Headlight bracket with 3 options. Comes with Cree 30W 12V LED lights. Power: 30W Working Voltage: 10-45V DCLEDs: 6pcs * 5W High Intensity Cree LED Lifespan: 50,000+ Hours...

    $139.99

    $125.99

    $65.00

    $58.50

    $125.00

    $106.25

    TRS Triple Tree Cover for Honda Ruckus Zoomer 6061 billet TRS Universal Aluminum Mini Switch Unit CNC-type black 7/8 TRS UNIVERSAL CNC KEY HEAD MADE IN USA BILLET 6061
    TRS Triple Tree Cover for Honda Ruckus Zoomer 6061 billet TRS Universal Aluminum Mini Switch Unit CNC-type black 7/8 TRS UNIVERSAL CNC KEY HEAD MADE IN USA BILLET 6061

    Wanna hid that stock triple tree. Our TRS triple tree cover for the Honda Ruckus / Zoomer is the solution. Cover your rusted OEM triple tree.  Made from Billet T-6061 .25" aluminum. Comes will all stainless hardware.

    Mini Univeral 7/8 aluminum switch unit for half the price. Aluminum cast body with black powdercoat finish. Allows you to use horn, lights high/low beam, and blinkers. Comes with wiring diagram.

    TRS KEY HEAD IS MADE WITH 6061 ALUMINUM AND CNC RIGHT HERE IN MERICA . NICE LITTLE ADDITION TO YOUR HONDA RUCKUS OR MET.

    NOTE: YOU MUST GRIND OFF TOP OF KEY TO FIT INSIDE SLOT. HAS SET SCREWS. COMES ONLY IN BLACK CONTRAST CUT

    $34.99

    $26.94

    $24.95

    $22.45

    $17.99

    $16.19

    ULTIMATE GY6 BILLET ALUMINUM CVT COVER aka ANKLEBITER Universal Bar end mirror Swivels 7/8 (22mm) works on either side XK GLOW LED HEADLIGHT BULB HI/LOW BEAM H4 ERROR FREE KIT
    ULTIMATE GY6 BILLET ALUMINUM CVT COVER aka ANKLEBITERUniversal Bar end mirror Swivels 7/8 (22mm) works on either sideXK GLOW LED HEADLIGHT BULB HI/LOW BEAM H4 ERROR FREE KIT

    TRS ULTIMATE GY6 TRANSMISSION CVT COVER We have sold hundreds of our Origina CVT Cover with no issues which is still available. Now we have come out with the Ultimate CVT cover. Unique front and rear side plates

    Universal Bar end mirror Swivels 7/8 (22mm) works on either side

    Looking to keep the stock Ruckus Headlights but want Brighter lights. Get super bright Lights with less watts than stock. Easy Plug and Play and Ballast go inside Battery Box.

    $199.00

    $185.07

    (1)

    $19.99

    $17.99

    (1)

    $39.99

    TRS Ruckus Zoomer MET and GY6  Ultimate License Plate Frame USA 78 " SLIDE THROTTLE CABLE 90 DEGREE BOTH ENDS MADE IN USA Aluminum 90 DEGREE Bent Valve Stem Set  black or silver
    TRS Ruckus Zoomer MET and GY6 Ultimate License Plate Frame USA 78 " SLIDE THROTTLE CABLE 90 DEGREE BOTH ENDS MADE IN USA Aluminum 90 DEGREE Bent Valve Stem Set black or silver

    This license mount allows you to adjust the frame so that your license place can be mounted in a ton of positions and a ton of locations, making truly unique to anything out there in the market

     

     

     

    78 INCH BLACK THROTTLE CABLE MEASURED FROM BEND TO BEND. ADJUSTER CABLE BUILT INTO CABLE. SEE PICS FOR ALL THE DETAILS TESTED AND MADE IN THE U.S.A. *Don't forget to lube all cables with cable lube, WD-40 , or oil.

    Aluminum 90 Degree Bent Angle Tire Valve Stem Set - Available in Black or Silver. Outer Diameter (where stem mounts): 10mm

    $44.99

    $38.24

    (1)

    $35.00

    $29.75

    $10.99

    $9.34

    ATR RUCKUS GY6 ENGINE SWAP HARNESS WITH EXTRAS AUTHENTIC CRG BLINDSPOT 2" MIRROR WITH BILLET BAR END MOUNT Biltwell  Kung Fu Grips - Black 7/8
    ATR RUCKUS GY6 ENGINE SWAP HARNESS WITH EXTRAS AUTHENTIC CRG BLINDSPOT 2" MIRROR WITH BILLET BAR END MOUNTBiltwell Kung Fu Grips - Black 7/8

    ATR plug and play GY6 engine harness will eliminate the need to fuzz around with wiring your engine swaps! Reduce the chances of errors and problems. Pre-labeled and ready to go! COMES WITH CDI TOO Please take a look at the drop-down menus for...

    FEATURES: 6160-T6 BILLET ALUMINUM CONSTRUCTION ALL STAINLESS HARDWARE FULLY MODULAR ASSEMBLY (EACH PART CAN BE REPLACED INCLUDING THE MIRROR) WORKS ON BOTH LEFT AND RIGHT DUE TO ELBOW WE INCLUDE THE BILLET INTERNAL ADAPTER FOR VIRTUALLY EVERY...

    Biltwell grips are available in 7/8” ”. Each size number refers to the outside diameter of the bar end on the left side of your scooter. If you don’t know the O.D. of your handlebars, measure with a caliper, an open-end wrench...

    $175.00

    $166.25

    (1)

    $64.99

    $61.74

    $17.95

    $17.05

    Biltwell  Recoil Grips - Black 7/8 Biltwell  Thruster Grips - Black 7/8 BLACK LICENSE PLATE FRAME
    Biltwell Recoil Grips - Black 7/8Biltwell Thruster Grips - Black 7/8BLACK LICENSE PLATE FRAME

    Biltwell grips are available in 7/8” ”. Each size number refers to the outside diameter of the bar end on the left side of your scooter. If you don’t know the O.D. of your handlebars, measure with a caliper, an open-end wrench...

    Biltwell grips are available in 7/8” ”. Each size number refers to the outside diameter of the bar end on the left side of your scooter. If you don’t know the O.D. of your handlebars, measure with a caliper, an open-end wrench...

    FITS ALL STANDARD MOTORCYCLES FRAMES IN BLACK

    $17.95

    $16.15

    $17.95

    $16.15

    $7.50

    $6.74

    Black Round Bar End mirror  7/8 (22mm) works on either side CLEAR LED BLINKERS BILLET BEZELS ONLY . 3 COLORS CLEAR LED BLINKERS W/ AMBER LED PAIR
    Black Round Bar End mirror 7/8 (22mm) works on either sideCLEAR LED BLINKERS BILLET BEZELS ONLY . 3 COLORS CLEAR LED BLINKERS W/ AMBER LED PAIR

    A unique combining bar end weight and mirrors full height and adjustment

    NEW PRODUCT. CNC LED BEZELS IN rAW, BLACK OR RED ANODIZED MADE IN THE USA MADE OF 6160 BILLET  CENTER HOLE 17mm. These are if you already have the TRS LED from us.

    NEW PRODUCT. SUPER BRIGHT AMBER LED IN CLEAR HOUSING. 1 INCH DIAMETER. PERFECT FIT FOR BATTERY BOX MOUNTING Features: Ready to Mount high intensity LED's: Recess / Flush mount LED's mount out of sight and out of the way. Dimensions: Indicator...

    $14.99

    $13.49

    $19.99

    $17.99

    $29.99

    $26.99

    CLEAR LED BLINKERS W/ AMBER LED PAIR WITH CNC BEZEL CONTRAST CNC Billet  levers for Disc / Disc Brake DUAL MASTER BLK OR SIL CNC Billet Control levers for Drum / Disc Brake BLACK OR POLISH
    CLEAR LED BLINKERS W/ AMBER LED PAIR WITH CNC BEZEL CONTRAST CNC Billet levers for Disc / Disc Brake DUAL MASTER BLK OR SIL CNC Billet Control levers for Drum / Disc Brake BLACK OR POLISH

    NEW PRODUCT. SUPER BRIGHT AMBER LED IN CLEAR HOUSING. 1 INCH DIAMETER. PERFECT FIT FOR BATTERY BOX MOUNTING Features: Ready to Mount high intensity LED's: Recess / Flush mount LED's mount out of sight and out of the way. Dimensions: Indicator...

    CNC Billet control CRG Style Top Quality with DUAL MASTER CYLINDERS for DISC FRONT AND REAR BRAKE WITH BRAKE SIGNAL SWITCHES.  SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN

    CNC Billet control CRG Style Top Quality with Brake Switch Left for Clutch or Drum Brake Right for Disc Brake. SOLID UNITS THEY DON'T RATTLE LIKE OTHERS WE HAVE SEEN . We also install American Made O-ring in cup to help...

    $45.00

    $40.50

    $169.00

    $160.54

    $149.00

    $126.65

    (1)
    CNC Round Bar End mirrors - Black TRS  Mikuni DF-44 Fuel Pump & GY6 Coil Bracket COIL NOW INCLUDED TRS Honda Ruckus Headlight Lowering Kit  Bolt-On! 3 COLORS
    CNC Round Bar End mirrors - Black TRS Mikuni DF-44 Fuel Pump & GY6 Coil Bracket COIL NOW INCLUDEDTRS Honda Ruckus Headlight Lowering Kit Bolt-On! 3 COLORS

    CNC Billet Round Bar end Mirrors Specifications CNC machined Billet Aluminum Stainless Steel grab screw lock mirrors into place 4x mounting positions convex glass mirror diamter 7cm Fits 7/8 (22mm) handlebar Features A unique combining bar end...

    A GREAT answer as to where to put that ugly coil! Mount it down out of the way with your fuel pump, and hide them! This clever mount is designed to use the 2-bolt type coils, along with the popular Mikuni DF-44 Fuel Pump! With this bracket you...

    Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower,

    $44.99

    $38.24

    $49.00

    $44.10

    $48.00

    $40.79

    Ruckus Headlight Frame Lowering Bracket - Weld-on! GY6 Oil Dipstick Revolver GEEEN ONLY  CLOSEOUT SALE Honda  fit Brake Lever with BRAKE SWITCH  - BLACK
    Ruckus Headlight Frame Lowering Bracket - Weld-on!GY6 Oil Dipstick Revolver GEEEN ONLY CLOSEOUT SALEHonda fit Brake Lever with BRAKE SWITCH - BLACK

    Still running stock lights? Well make them look even BETTER by lowering them a bit, and getting them closer to the front wheel, and not looking like they are always sky-high all the time! Bracket comes in raw metal. you must paint or powdercoat yourself

    Looking for something to add to your Ruckus that not everyone has? The NCY Revolver Oil Dipstick is here with 7 different colors to choose from. Comes in: Silver, Gold, Orange, Red, Blue, Purple, or Green. Ships for Free. Dipstick can be adjusted...

    Universal Fit Brake Lever. In Black. Great for those that want to run no left switch boxes or looking for a matching lever for the NCY front end kits. Comes with brack switch. USA Stainless hardware for clamp with nylock nut for shouldered bolt....

    $26.00

    $23.40

    $29.99

    $14.99

    $14.99

    $13.49

    HONDA RUCKUS / ZOOMER REAR FLUSH MOUNT LED TAILLIGHT TURTLE HEAD HONDA RUCKUS Carbon Fiber Tank cover High end and Thick NCY HONDA RUCKUS CREE LED 6"  HEADLIGHT BAR W/ MOUNT 35W 3000 LUMENS
    HONDA RUCKUS / ZOOMER REAR FLUSH MOUNT LED TAILLIGHT TURTLE HEADHONDA RUCKUS Carbon Fiber Tank cover High end and Thick NCYHONDA RUCKUS CREE LED 6" HEADLIGHT BAR W/ MOUNT 35W 3000 LUMENS

    Looking to run a flush taillight that is high and tight. Look no farther. The TRS FLUSH MOUNT LED uses a quality made in the USA Light one of the brightest in the industry.

    This carbon fiber gas tank cover gives the Ruckus a high end and indestructable look. Nice and thick

    TRS Honda Ruckus 6" Single Row Performance LED Light Bar Headlight Conversion Kit Product Features: Comes with Powercoated matte black brackets. NOT a 1 piece bracket. 2 piece bracket allows for better installation and bracket not warpping....

    $82.00

    $73.80

    $189.99

    $170.99

    $109.99

    $98.99

    Ruckus GET 49cc Engine Stretch 9.5" Extension w/ brake cable Honda Ruckus Frame Splitter Alumunum Imported Ships Free HONDA RUCKUS SOLID FRONT FRAME COVER GUARD BILLET T-6061
    Ruckus GET 49cc Engine Stretch 9.5" Extension w/ brake cable Honda Ruckus Frame Splitter Alumunum Imported Ships Free HONDA RUCKUS SOLID FRONT FRAME COVER GUARD BILLET T-6061

    TRS 9.5 Extension kit V2 NOW IN GLOSS BLACK.  FITS ALL NPS-50 2003 And Newer.  Updated version now is TIG welded, with locking design so everything is trued.  EVERY PIECE OF THIS IS MADE IN THE USA, Even the washers. 

    The Honda Ruckus Frame Splitter is an easy way to cover up your coil and fuel pump? . Designed to fit over the fuel tank or its cover, the Frame Splitter really helps cover the rear section of the front sub-frame nicely when compared to the...

    Removing the OEM front frame plastics can really leave your Honda Ruckus looking bare. Well, TRS comes to the rescue with their Honda Ruckus Front Frame Cover. Cut out of 6061 billet Aluminum not just a cheap plate. These covers are attractive...

    $159.95

    $143.95

    $29.00

    $27.54

    $64.99

    $58.49

    Honda Ruckus GET, GY6, ZUMA   License Plate Mount 12 position Honda Ruckus Louvered Radiator Cover Aluminum or Copper HONDA RUCKUS MET ZOOMER LED LIGHT FLASHER RELAY
    Honda Ruckus GET, GY6, ZUMA License Plate Mount 12 positionHonda Ruckus Louvered Radiator Cover Aluminum or CopperHONDA RUCKUS MET ZOOMER LED LIGHT FLASHER RELAY

    OTTO FACTORY GY6 License Plate Mount with all hardware. Can be mounted Vertical or horizontal. Powder Coated in Black with Stainless Hardware. Mounts on the GY6 CVT case and allows you to run your plate 6 different ways. If you like it vertical...

    LOOKING FOR SOMETHING OLDSCHOOL OR DIFFERENT. LOUVERED ALUMINUM RADITOR COVER IS JUST THE THING. WE NOW OFFER IT MADE IN 100% COPPER AS WELL FOR A LIMITED TIME.

     

    HONDA RUCKUS LED FLASHER RELAY WITH INSTRUCTIONS AND GROUND ALREADY WIRED. Looking to add LED Blinkers or brake lights to your scooter? You will need either a set of in-line resistors for the circuit or replace the OEM flasher with our LED...

    $38.99

    $35.09

    $14.99

    $14.24

    $13.99

    $12.59

    (1)
    Honda Ruckus Metropolitan REED PAR PAIR Valve Block Off 4 TYPES Honda Ruckus Side Steps Alumunum Imported, Ships Free Improved Ruckus / Zoomer Aluminum Foot Pegs BLACK
    Honda Ruckus Metropolitan REED PAR PAIR Valve Block Off 4 TYPESHonda Ruckus Side Steps Alumunum Imported, Ships Free Improved Ruckus / Zoomer Aluminum Foot Pegs BLACK

    If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate....

     To really set off the look of your Honda Ruckus after removing the OEM Floorboards, you need to use these Honda Ruckus Side Steps. They go hand-in-hand with the Honda Ruckus Frame Splitter.

    IMPROVED DESIGN. NO more Meat Cutter. Tired of getting your legs cut or calves scrapped. These new pegs have rounded ends and all edges are filed smooth. Using a unique tapered design, you do not have to worry about the pegs scraping the asphalt...

    $18.99

    $17.09

    (1)

    $29.00

    $26.10

    $39.99

    $27.99

    Improved Ruckus / Zoomer Aluminum Foot Pegs RAW Improved Ruckus / Zoomer Aluminum Foot Pegs RED Left Handle Switch to use with CNC levers  V2  FREE SHIPPING
    Improved Ruckus / Zoomer Aluminum Foot Pegs RAWImproved Ruckus / Zoomer Aluminum Foot Pegs REDLeft Handle Switch to use with CNC levers V2 FREE SHIPPING

    IMPROVED DESIGN. NO more Meat Cutter. Tired of getting your legs cut or calves scrapped. These new pegs have rounded ends and all edges are filed smooth. Using a unique tapered design, you do not have to worry about the pegs scraping the asphalt...

    IMPROVED DESIGN. NO more Meat Cutter. Tired of getting your legs cut or calves scrapped. These new pegs have rounded ends and all edges are filed smooth. Using a unique tapered design, you do not have to worry about the pegs scraping the asphalt...

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual. 

    $39.99

    $27.99

    $39.99

    $27.99

    $15.00

    $12.00

    Left Handle Switch to use with CNC levers  V3  FREE SHIPPING LOWERED Password JDM Ruckus Kickstand SHIPS FREE METAL RUBBER COATED REAR BRAKE CABLE HOLDER
    Left Handle Switch to use with CNC levers V3 FREE SHIPPINGLOWERED Password JDM Ruckus Kickstand SHIPS FREE METAL RUBBER COATED REAR BRAKE CABLE HOLDER

    Left Handle Switch used with Rear Disc Brakes or our CNC brake levers. Great alternative to the Stage6 controls that seem to always be sold out. You may have to repin plug for Honda Ruckus please check OEM service manual. v3 ALL BLACK BUTTONS...

    Did you ever notice your Ruckus center stand is very heavy and a bitch to lower? Now you can ditch that weight and get a kick stand that really works. The PWJDM Kickstand is by far the cleanest looking and most functional Ruckus kick stand on the...

    METAL CLAMP WITH RUBBER COATING TO HOLD REAR BRAKE CABLE SO IT DOES NOT HIT THE LIP OF THE WHEEL. ATTACHES TO CVT AREA. SEE PIC

    $15.99

    $14.39

    $74.99

    $52.49

    $3.00

    $2.84

    Multi Function Pocket Tool Multi Tool with Sockets NCY BLACK QUICK THROTTLE TUBE
    Multi Function Pocket ToolMulti Tool with SocketsNCY BLACK QUICK THROTTLE TUBE

    Aluminum body for lighter weight. Anodized for corrosion protection and great looks. Compact size packs multi function utility. Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and flat head screwdrivers.

    Aluminum body for lighter weight. Anodized for corrosion protection and great looks. Compact size packs multi function utility. Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an 8mm hex tip, cross head and flat head screwdrivers.

    NCY Black Aluminum throttle tube. 7/8" or 22mm diameter with 4 cable mounting positions and tension adjuster for Honda Ruckus.

    $14.95

    $10.99

    $59.99

    $49.79

    TRS Handlebar BLACK 7/8 Straight with 2 inch pullback TRS Handlebar Chrome 7/8 Straight with 2 inch pullback NCY UNIVERSAL CNC KEY HEAD  3 COLORS
    TRS Handlebar BLACK 7/8 Straight with 2 inch pullback TRS Handlebar Chrome 7/8 Straight with 2 inch pullback NCY UNIVERSAL CNC KEY HEAD 3 COLORS

    Make your scoot stand-out from the crowd with some Flat-tracker style bars. Black. DIMENSIONS: Diameter: 7/8" Width: 26.5" Pullback: 2.0" Rise: 0.00"

    Make your scoot stand-out from the crowd with some Flat-tracker style bars. Brushed aluminum. DIMENSIONS: Diameter: 7/8" Width: 26.5" Pullback: 2.0" Rise: 0.00"

    NCY KEY HEAD IN GOLD, RED OR GUN METAL GRAY. NICE LITTLE ADDITION TO YOUR HONDA RUCKUS OR MET.

    NOTE: YOU MUST GRIND OFF TOP OF KEY TO FIT INSIDE SLOT. HAS SET SCREW.

    $23.95

    $21.55

    $22.95

    $20.65

    $14.99

    $12.74

    NCY, Foot Rest Footrest  (white) Ruckus NCY, Foot Rest Footrest (BLACK)  Ruckus NCY, Gas Tank Cover V2 w/ cap (White) Honda Ruckus v2
    NCY, Foot Rest Footrest (white) RuckusNCY, Foot Rest Footrest (BLACK) RuckusNCY, Gas Tank Cover V2 w/ cap (White) Honda Ruckus v2

    Stiffen up your chassis with the NCY Honda Ruckus / Zoomer Footrest Brace. This kit includes folding foot pegs for a more comfortable ride. This footrest comes painted WHITE. WE GOT THEM IN STOCK 

    Stiffen up your chassis with the NCY Honda Ruckus / Zoomer Footrest Brace. This kit includes folding foot pegs for a more comfortable ride. This footrest comes painted Black.

    Custom Honda Ruckus Gas Tank Cover (White) Give your Ruckus a custom look and also get rid of some of that unwanted weight! Covers up your stock gas tank when stock floorboard is removed.

    $124.99

    $124.99

    $103.49

    $56.99

    $46.01

    NCY, Gas Tank Cover V2 w/ cap Black Honda Ruckus NO LOGO Ruckus Headlight Frame Lowering Bracket - Weld-on! Password JDM Ruckus / Zoomer Gas Cap Cover V.1  Red Black or Raw
    NCY, Gas Tank Cover V2 w/ cap Black Honda Ruckus NO LOGO Ruckus Headlight Frame Lowering Bracket - Weld-on!Password JDM Ruckus / Zoomer Gas Cap Cover V.1 Red Black or Raw

    Custom Honda Ruckus Gas Tank Cover (Black) Give your Ruckus a custom look and also get rid of some of that unwanted weight! Covers up your stock gas tank when stock floorboard is removed.

    Still running stock lights? Well make them look even BETTER by lowering them a bit, and getting them closer to the front wheel, and not looking like they are always sky-high all the time! Bracket comes in raw metal. you must paint or powdercoat yourself

    Now you can cover up your ugly steel gas cap with the Password:JDM milled aluminum gas cap cover. Our gas cap features a low profile design for the cleanest look possible. Using the included set screws, this cap is virtually impossible for...

    $56.99

    $47.01

    $19.99

    $15.99

    $37.99

    $24.69

    TRS Ruckus Fender Washer Dress-up Kit for Battery Box  3 colors RUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA Single Light: Black LED 60mm Anti-Vibe Post Mount  FREE SHIPPING
    TRS Ruckus Fender Washer Dress-up Kit for Battery Box 3 colors RUCKUS SHORTY LOWERED FRONT BRAKE CABLE 39 INCH MADE IN USA Single Light: Black LED 60mm Anti-Vibe Post Mount FREE SHIPPING

    FINALLY! A Battery Box Washer Kit that fits with the right size bolts and washers. Add that last finishing touch to your project with these all new TRS battery box dress up kit! Each kit includes 4 x 5mm washers, 3 x6mm washers and stainless...

    TIRED OF ROCKING THAT LONG FRONT BRAKE CABLE WHEN YOU LOWER YOUR SHOCK FORKS? WE FIXED THAT. CUSTOM MADE FOR THE RUCK SHOP 39 INCH SHORT FRONT BRAKE CABLE TRUE 39 INCES.

     

    Black LED Light with anti-vibe post mount (replacement light for Trail Tech brackets, does not include rubber grommet.) use this the Composimo LED mount Feature Description Brightness Modes 3 (Hi - Med - Lo) Brightness 1050 Lumens (Hi mode) Beam...

    $15.75

    $14.17

    $30.99

    $99.99

    $89.99

    Split Braided Wire Loom CLEAN CUT 1/2 OR 3/4 INCH STAGE 6 MINI LCD DISPLAY. fuel gauge Stage6 Mini LCD digital STAGE6 F1 MIRROR  F1 look left side ONLY  CHROME
    Split Braided Wire Loom CLEAN CUT 1/2 OR 3/4 INCHSTAGE 6 MINI LCD DISPLAY. fuel gauge Stage6 Mini LCD digitalSTAGE6 F1 MIRROR F1 look left side ONLY CHROME

    3/4 INCH Split Braided Wire Loom CLEAN CUT 5 foot section Our unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open...

    Item Nr.: 12939 OEM-Nr.: S6-4035 EAN-Code: 4051272113246 Who does not know the problem with inaccurate analog fuel gauge. Often you can not estimate exactly how far the bottom of the fuel remaining. Remedied the digital fuel gauge from Stage6. It...

    SINGLE MIRROR left rear view mirror from Stage6 F1 in the stylish look CHROME. The Stage6 styling department has set itself the popular F1 mirrors, which are offered by many manufacturers unchanged for years. Result is a contemporary...

    $9.99

    $9.49

    $59.99

    $35.00

    STAINLESS STEEL HONDA  RUCKUS ZOOMER  TANK COVER STOCK Password JDM Ruckus /Kickstand SHIPS FREE Switch Unit Stage6 CNC-type black
    STAINLESS STEEL HONDA RUCKUS ZOOMER TANK COVERSTOCK Password JDM Ruckus /Kickstand SHIPS FREE Switch Unit Stage6 CNC-type black

    STAINLESS STEEL TANK COVER FOR USE WHEN YOU REMOVE YOUR TANK COVER PERFECT FOR POWDER COATING. IMPORTED FROM JAPAN. FREE SHIPPING *Front has a lip that can be cut, we use Seat Frame washers

    Did you ever notice your Ruckus center stand is very heavy and a bitch to lower? Now you can ditch that weight and get a kick stand that really works. The PWJDM Kickstand is by far the cleanest looking and most functional Ruckus kick stand on the...

    Switch unit from Stage6 that will dwarf all plastic handlebar controls available so far on the market. This switch unit is an excellently finished state-of-the-art product CNC milled from aluminium. And the equipment leaves nothing to be desired...

    $79.00

    $63.20

    $74.99

    $52.49

    $49.99

    $44.99

    Switch Unit Stage6 CNC-type chrome Switch Unit Stage6 CNC-type steel grey / gun metal THE RUCK SHOP / I RUCK ON THE FIRST DATE key fob
    Switch Unit Stage6 CNC-type chromeSwitch Unit Stage6 CNC-type steel grey / gun metalTHE RUCK SHOP / I RUCK ON THE FIRST DATE key fob

    Switch unit from Stage6 that will dwarf all plastic handlebar controls available so far on the market. This switch unit is an excellently finished state-of-the-art product CNC milled from aluminium. And the equipment leaves nothing to be desired...

    Switch unit from Stage6 that will dwarf all plastic handlebar controls available so far on the market. This switch unit is an excellently finished state-of-the-art product CNC milled from aluminium. And the equipment leaves nothing to be desired...

    THE RUCK SHOP KEY FOB ONE SIDE SAYS: I RUCK ON THE FIRST DATE OTHER SIDE : THERUCKSHOP.COM PERFECT FOR YOUR RUCKUS OR MET KEYS. COMES IN BLACK, RED, OR PINK

    $49.99

    $44.99

    $49.99

    $47.49

    $2.99

    Throttle Kit Stage6 CNC Type BLACK Throttle Kit Stage6 CNC Type Chrome Throttle Kit Stage6 CNC Type steel grey / gun metal
    Throttle Kit Stage6 CNC Type BLACKThrottle Kit Stage6 CNC Type ChromeThrottle Kit Stage6 CNC Type steel grey / gun metal

    Switch unit from Stage6 that will dwarf all plastic handlebar controls available so far on the market. This switch unit is an excellently finished state-of-the-art product CNC milled from aluminium. And the equipment leaves nothing to be desired...

    Switch unit from Stage6 that will dwarf all plastic handlebar controls available so far on the market. This switch unit is an excellently finished state-of-the-art product CNC milled from aluminium. And the equipment leaves nothing to be desired...

    Switch unit from Stage6 that will dwarf all plastic handlebar controls available so far on the market. This switch unit is an excellently finished state-of-the-art product CNC milled from aluminium. And the equipment leaves nothing to be desired...

    $109.99

    $98.99

    $109.99

    $98.99

    $109.99

    $98.99

    TrailTech TTO Tach & hour Digital Guage Black Surface Mount TRAILTECH VAPOR SPEEDO /TACH GLOSS BLACK V2 - RUCKUS TRAILTECH VAPOR SPEEDO CABLE FOR DISC BRAKE
    TrailTech TTO Tach & hour Digital Guage Black Surface Mount TRAILTECH VAPOR SPEEDO /TACH GLOSS BLACK V2 - RUCKUSTRAILTECH VAPOR SPEEDO CABLE FOR DISC BRAKE

    Trail Tech TTO Tach/Hour Meter Works on all gas engines (including fuel injected 4-cyl engines) Tracks total hours on motor, non-resettable Measures tach up 20,000 RPM in real time Remembers max RPM, resettable Spinning arrow activity icon...

    Includes: Mounting Hardware, Speed Sensor, Magnet Kit, and Temperature Sensor. Sold Separate: Protectors/Dashboards. IF YOU HAVE A RRGS DUAL CALIPER BRAKE YOU CAN MOUNT SENSOR TO BOTTOM OF CALIPER BRACKET BY TAPPING THE BRACKET. SEE PIC. COMES...

    THIS CABLE MAKE INSTALLATION CLEAN. WILL REQUIRE YOU TO DRILL AND TAPE YOUR BRAKE CALIPER MOUNT AND GLUE MAGNET TO ROTOR. WILL NEED USUALLY ONLY FOR SINGLE PISTON CALIPER LIKE ON NCY FRONT KIT IF YOU HAVE A RRGS DUAL PISTON CALIPER YOU WILL NOT...

    $37.95

    $36.05

    $139.95

    $113.35

    $29.95

    TRS  BOTTLE CAP V2 GAS CAP FOR RUCKUS & MET 2 COLORS ALL BILLET TRS  Mikuni DF-44 Fuel Pump Bracket in Raw or Black TRS Sidewinder Headlight Bracket and 60mm LED Trailtech light
    TRS BOTTLE CAP V2 GAS CAP FOR RUCKUS & MET 2 COLORS ALL BILLETTRS Mikuni DF-44 Fuel Pump Bracket in Raw or Black TRS Sidewinder Headlight Bracket and 60mm LED Trailtech light

    TRS BOTTLE CAP Vented Gas Cap that fits both HONDA Ruckus and Metropolitan.This cap comes complete no need to swap parts from your OEM cap or break off tabs. It's ready to go. Unpack and put on. No more messing... ALL BILLET

    Looking for a stylish way to mount your Mikuni DF-44 Rectangular fuel pump? This is IT!

    Available in Raw or Anodized

    Looking to mount a single Trailtech LED headlight to your Ruckus forks, but you're too low? This is THE setup you NEED! It allows the best mounting of the Trailtech LED headlight on your Honda Ruckus no matter how low you are! The mount is...

    $69.99

    $55.99

    $25.00

    $22.50

    $150.00

    $135.00

    TRS 4/140  RUCKUS KYMCO HUB COVER CENTER CAP MILLED or ROUND TRS 6MM CNC FENDER WASHERS WITH BOLTS - GOLD AND RED ONLY TRS 9 TO NOON LICENSE PLATE FRAME CNC  6061 ALUMINUM
    TRS 4/140 RUCKUS KYMCO HUB COVER CENTER CAP MILLED or ROUNDTRS 6MM CNC FENDER WASHERS WITH BOLTS - GOLD AND RED ONLYTRS 9 TO NOON LICENSE PLATE FRAME CNC 6061 ALUMINUM

    Looking to cover that ugly Kymco Hub. Look no further The Ruck Shop has you covered. 6160 CNC Billet hub cover 4/140 bolt pattern. Comes with 4 M8x1.25 stainless bolts. Will work on 4/137 4/136 and 4/144 wheels. Customer may need to open holes on...

    The TRS Fender Washer Kits include (5) 6Mx20 stainless steel bolts and 5 washers. The fender washers will fit any 10mm bolt hole under the hood of your Honda or Ruckus. The 6Mx20 bolts is recommended for all parts under your hood such as...

    NO PILL IS NEEDED TO GET YOUR PLATE STANDING UP. IT GOES FROM NINE TO NOON WITH EASY. ALL JOKES ASIDE. IF YOU WANT TO RUN YOU PLATE VERTICAL OR HORIZONTAL ALL YOU DO IS REMOVE THE 2 LITTLE BOLTS AND REPOSITION, EASY AS THAT. COMES WITH ALL...

    $59.00

    $53.10

    $15.00

    $12.00

    $49.00

    $44.10

    TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS TRS BATTERY BOX FUEL / LIGHT BLOCK OFF BLACK OR RAW TRS BATTERY BOX FUEL / LIGHT BLOCK OFF W/ START BUTTON SWITCH
    TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS TRS BATTERY BOX FUEL / LIGHT BLOCK OFF BLACK OR RAW TRS BATTERY BOX FUEL / LIGHT BLOCK OFF W/ START BUTTON SWITCH

    RRGS / NCY FRONT HUB SPACER KIT THIS KIT IS TO CENTER WHEEL FOR AFTERMARKET FRONT HUB NORMALLY USED WITH DOUGLAS, TRS, OR OTHER RUCKS WHEELS. YOU MAY HAVE TO ADD (USING WASHER) OR REMOVE (FILE) A COUPLE THOUSANTH OFF THE SPACER AS WE HAVE NO...

    NOT USING THE FUEL OR HIGH BEAM LIGHT FOR GY6 SWAPS? TRS HAS INTRODUCED THE SOLUTION. YOU NEED THE PLASTIC LED HIGH BEAM / FUEL LIGHT TO KEEP THE RIDGIDNESS FOR THE BATTERY BOX, THIS IS WHY MANY GY6 SWAPS HAVE BROKEN BOX TABS BECAUSE THEY REMOVE...

    LOOKING FOR A CLEAN PLACE FOR A START BUTTON? TRS HAS INTRODUCED THE SOLUTION. YOU NEED THE PLASTIC LED HIGH BEAM / FUEL LIGHT TO KEEP THE RIDGIDNESS FOR THE BATTERY BOX, THIS IS WHY MANY GY6 SWAPS HAVE BROKEN BOX TABS BECAUSE THEY REMOVE THIS...

    $19.99

    $18.79

    $39.99

    $33.99

    $49.99

    $44.99

    TRS Billet Aluminum Frame Caps Plugs  - 11 Styles ON SALE NOW TRS BILLET CNC HONDA RUCKUS METROPOLITAN BRAKE LEVERS V2 TRS CNC ALUMINUM RUCKUS ZOOMER CVT COVER ANKLEBITER  3 COLORS
    TRS Billet Aluminum Frame Caps Plugs - 11 Styles ON SALE NOWTRS BILLET CNC HONDA RUCKUS METROPOLITAN BRAKE LEVERS V2TRS CNC ALUMINUM RUCKUS ZOOMER CVT COVER ANKLEBITER 3 COLORS

    Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly...

    HAVE DRUM BRAKES? WANT THAT CUSTOM LOOK. WE GOT YOU COVERED. BILLET 6160 SHORT LEVERS FOR THE HONDA RUCKUS / ZOOMER / METROPOLITAN. ALLOWS THE USE OF BRAKE LOCK AND BOTH SWITCHES. RAW OR ANODIZED BLACK INTRODUCTION PRICED AND FREE SHIPPING.

    The GET Open CVT Drive Cover aka AnkleBiter Want the look of the a GY6 ? Is your clutch always running hot and slipping . Helps prolong life of belt and Clutch pads since heat is released. No problems running in rain. This Drive cover is CNC...

    $28.00

    $22.40

    $69.99

    $55.99

    $89.99

    $83.69

    TRS FORWARD FOOTREST PEG LEGS FOR  HONDA RUCKUS MADE IN USA TRS GY6 BILLET ALUMINUM CVT COVER AKA ANKLEBITER 3 TYPES TRS Honda  Ruckus / Zoomer Ultimate CNC Handlebar Black v2
    TRS FORWARD FOOTREST PEG LEGS FOR HONDA RUCKUS MADE IN USATRS GY6 BILLET ALUMINUM CVT COVER AKA ANKLEBITER 3 TYPESTRS Honda Ruckus / Zoomer Ultimate CNC Handlebar Black v2

    The TRS FORWARD FOOTREST is a great addition to your ruckus for that extra leg room. Great for riders who are taller or want another leg position. Attaches to side of frame.

     Our CVT includes a .13" THICK Stainless Steel 'backing plate' to help prevent case cracking along with covering the ugly insides of the stock swingarm, a billet machined decorative front plate, and billet aluminum

    The TRS ULTIMATE BAR Setup... It's The Ultimate Ruckus Steering System. Period! That's it!!! That's the name... That's what it is... You won't find a cleaner looking integrated handlebar and stem combo from anywhere else. We here at THE RUCK SHOP...

    $65.00

    $58.50

    (1)

    $147.00

    $132.30

    $399.00

    $371.07

    TRS Honda Ruckus CNC Lowboy Seat Frame Gloss, Raw or  White TRS HONDA Ruckus Met Key Ignition Billet Cover  2 STYLES TRS HONDA RUCKUS STEM NECK ALLOWS SPEEDO BLINKER LIGHT
    TRS Honda Ruckus CNC Lowboy Seat Frame Gloss, Raw or White TRS HONDA Ruckus Met Key Ignition Billet Cover 2 STYLES TRS HONDA RUCKUS STEM NECK ALLOWS SPEEDO BLINKER LIGHT

    LOOKING FOR A SEAT FRAME TO MOVE YOU BACK AND LOW. WE GOT IT. COMES WITH ALL STAINLESS HARDWARE, ANODIZED DOWNSTAR WASHERS (SAVES YOU $24.00) AND POWDERCOATED GLOSS BLACK, RAW OR WHITE. LIMITED QUANTITIES AVAIALABLE.

     Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock.
    CNC Machined out of 6061 Billet Aluminum

    TRS OLDSCHOOL TOP CLAMP NECK FOR HONDA RUCKUS. ALLOWS THE USE OF THE STOCK SPEEDO AND TURN SIGNAL INDICATOR. THIS IS FOR 7/8 BARS. CNC BILLET AND ANODIZED BLACK AND STAINLESS PLATE. COMES WITH ALL HARDWARE. Installation notes: Remove blinker lens...

    $230.00

    $184.00

    $39.99

    $31.99

    $100.00

    $90.00

    TRS INTAKE BRACKET FOR AIRBOX DELETE KIT SHIPS FREE TRS MINI RACHET WRENCH SET TRS R6 Under Seat Mount Smoke Taillight w/  Intergrated signals
    TRS INTAKE BRACKET FOR AIRBOX DELETE KIT SHIPS FREE TRS MINI RACHET WRENCH SET TRS R6 Under Seat Mount Smoke Taillight w/ Intergrated signals

    TIRED OF ZIP TIES. THIS INTAKE BRACKET REPLACED THE PVC COUPLER WE INCLUDE IN OUR AIRBOX DELETE KIT. BRACKET IS SHIPPED RAW AND MUST BE HAND BENT. YOU CAN PAINT OR POWDERCOAT IT ANY COLOR YOU CHOOSE.

    17-piece kit fits just about anywhere and packed full of essential bits PERFECT FOR YOUR RUCKUS OR MET. Quality ratchet and bits made from tool steel Comes with 5 cross head, 3 flat head, 2 torx head, 5 sockets and extension

     

    100% brand new and high qualitY Swap your stock Ruckus Light with these. You may need in line load equalizer for turn signals to flash. LED light color: Taillight is red, turn signal is amber Voltage: 12V Lens Color: Smoke Dimension: 6.5 x 3.3 x...

    $24.99

    $22.49

    $9.99

    $59.00

    $53.10

    (4)
    TRS Ruckus / Zoomer Anti-Flex Frame Bushing - SHIPS FREE TRS Ruckus / Zoomer Metropolitan Radiator CNC Cover TRS Ruckus BILLET Handlebar Stem neck  7/8  3 Styles
    TRS Ruckus / Zoomer Anti-Flex Frame Bushing - SHIPS FREE TRS Ruckus / Zoomer Metropolitan Radiator CNC CoverTRS Ruckus BILLET Handlebar Stem neck 7/8 3 Styles

    The TRS Ruckus Anti-Flex Bushing is the answer to those who are tired of that lean that you often see with the Ruckus. This “lean” or “slant,”  is a problem created when your Ruckus has a load

    Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are 6160 aluminum cut sweetness that your...

    What makes our stem different from all the others? Where is the steering tube? Say goodbye to home made hacks and shim kits to get your BMX style stem to fit, THE RUCK SHOP Billet Aluminum Steering Stem is a direct swap for the stock handlebar. 

    $27.98

    $25.18

    $35.99

    $32.39

    $74.99

    $69.74

    TRS RUCKUS CUSTOM SEAT COVERS BRIDE RECARO DIAMOND AND MORE TRS RUCKUS OG CNC HANDLEBAR  CNC BILLET 35MM TRS RUCKUS REAR FRAME LICENSE PLATE MOUNT 4 COLORS SHIPS FREE
    TRS RUCKUS CUSTOM SEAT COVERS BRIDE RECARO DIAMOND AND MORE TRS RUCKUS OG CNC HANDLEBAR CNC BILLET 35MM TRS RUCKUS REAR FRAME LICENSE PLATE MOUNT 4 COLORS SHIPS FREE

     TRS NOW OFFERS CUSTOM SEAT COVERS. ALL YOU NEED TO DO IS REMOVE YOU OLD SEAT COVER AND INSTALL with Staple Gun. (We recommend Electric or Air Staple gun). Limited Styles. At this time we do not offer custom one off's seats.

    THE RUCK SHOP IS BRINGING BACK THE OG (ORIGINAL GANGSTAR) BARS. YOU O.G. RIDERS REMEMBER THESE. WELL, THEY ARE BACK. YOU WILL NEED 35MM CLIP ON BARS WHICH YOU CAN FIND FOR UNDER $50. THIS IS A INEXPENSIVE WAY TO GET SOME AWESOME BARS ON YOUR...

    Got a new ruckus but don't like that big tail light assemble and you want to remove it but don't want the grind marks showing. We got the answer. The TRS mount hides the grind marks

    $125.00

    $105.00

    (1)

    $125.00

    $118.75

    $82.00

    $73.80

    TRS Ruckus Zoomer  Frame Extension Spacers Billet  2 COLORS TRS SHINEY RUCKUS MAIN FRAME BOLTS (4 PACK) TRS Stage 6 to CVK Carburetor Throttle Cable 75 INCH USA
    TRS Ruckus Zoomer Frame Extension Spacers Billet 2 COLORSTRS SHINEY RUCKUS MAIN FRAME BOLTS (4 PACK)TRS Stage 6 to CVK Carburetor Throttle Cable 75 INCH USA

    The TRS Frame Spacers extend the frame, pushing the seat back and giving taller riders a more comfortable riding position or just stretching your ruckus as long as you can. CNC machined from solid billet AL6061-T6 aluminum for maximum strength....

    LOOKING TO UPGRADE YOUR STOCK FRAME BOLTS WE HAVE THE CORRECT THREAD AND PITCH FOR THE HONDA RUCKUS FRAME. GRADE 12.9 STEEL ZINC PLATED FOR CORROSSION RESISTANCE. COMES WITH STAINLESS STEEL WASHERS.

    TRS Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. TRS Throttle SSP to CVK throttle cable will also work...

    $135.00

    $114.75

    $11.50

    $37.00

    $33.30

    TRS TRANSFORMER HANDLE BARS 7 COLORS 7/8 RUCKUS GROM TRS UNDERSEAT STORAGE THUMB SCREW TRS VIP SERIES  RUCKUS ZOOMER CVT COVER ANKLEBITER  2 STYLES
    TRS TRANSFORMER HANDLE BARS 7 COLORS 7/8 RUCKUS GROMTRS UNDERSEAT STORAGE THUMB SCREW TRS VIP SERIES RUCKUS ZOOMER CVT COVER ANKLEBITER 2 STYLES

    EVER GET TIRED OF THE SAME STYLE HANDLE BARS? WITH THE NEW TRS TRANSFORMER BARS YOU CAN USE YOUR IMAGINATION WITH OVER 50 DIFFERENT STYLES TO CREATE!! AVAILABLE IN ANODIZED BLACK, RED, LIME GREEN, GUN METAL, SILVER, ORANGE, AND BLUE. EACH SET...

    Are you Rocking a Lower Seat frame or Dorf Seat and can't flip up the seat but need to get to your registration or paperwork and a screwdrive will not work ? We have the solution you are looking for.

    The TRS VIP SERIES Open CVT Drive Cover aka AnkleBiter for THE HONDA GET MOTOR.
    Want the look of the a GY6 ? Is your clutch always running hot and slipping . Helps prolong life of belt and Clutch pads since heat is released.

    $99.00

    $87.12

    (1)

    $4.25

    $3.82

    $124.99

    $112.49

    TVR AIR INTAKE SYSTEM HONDA RUCKUS MET ZOOMER WIZARDS METAL POLISH FOR MOTORCYCLES
    TVR AIR INTAKE SYSTEM HONDA RUCKUS MET ZOOMER WIZARDS METAL POLISH FOR MOTORCYCLES

    This TVR air intake kit was designed with the Honda Ruckus/Metropolitan tuner in mind. It is fully adjustable to maximize the power and efficiency of your GET Honda Ruckus no matter the temperature, altitude, or humidity levels in your area....

    THIS IS THE BEST STUFF WE HAVE USED AND WE HAVED A LOT OF POLISHES. Metal Polish™ for Motorcycles The Magic Is In The Cloth™ Part No. 22011, 3.0 oz • Brightens and protects ALL metals: aluminum, chrome*, stainless, brass, copper,...

    $79.00

    $75.05

    $12.99

    1 - 152 of 152 items