ACCESSORIES

 
     
    121 - 156 of 156 items
    TrailTech TTO Tach & hour Digital Guage Black Surface Mount TRAILTECH VAPOR SPEEDO /TACH GLOSS BLACK V2 - RUCKUS TRAILTECH VAPOR SPEEDO CABLE FOR DISC BRAKE
    TrailTech TTO Tach & hour Digital Guage Black Surface Mount TRAILTECH VAPOR SPEEDO /TACH GLOSS BLACK V2 - RUCKUSTRAILTECH VAPOR SPEEDO CABLE FOR DISC BRAKE

    Trail Tech TTO Tach/Hour Meter Works on all gas engines (including fuel injected 4-cyl engines) Tracks total hours on motor, non-resettable Measures tach up 20,000 RPM in real time Remembers max RPM, resettable Spinning arrow activity icon...

    Includes: Mounting Hardware, Speed Sensor, Magnet Kit, and Temperature Sensor. Sold Separate: Protectors/Dashboards. IF YOU HAVE A RRGS DUAL CALIPER BRAKE YOU CAN MOUNT SENSOR TO BOTTOM OF CALIPER BRACKET BY TAPPING THE BRACKET. SEE PIC. COMES...

    THIS CABLE MAKE INSTALLATION CLEAN. WILL REQUIRE YOU TO DRILL AND TAPE YOUR BRAKE CALIPER MOUNT AND GLUE MAGNET TO ROTOR. WILL NEED USUALLY ONLY FOR SINGLE PISTON CALIPER LIKE ON NCY FRONT KIT IF YOU HAVE A RRGS DUAL PISTON CALIPER YOU WILL NOT...

    $37.95

    $36.05

    $139.95

    $125.95

    $29.95

    $27.85

    TRS  Mikuni DF-44 Fuel Pump Bracket in Raw or Black TRS Sidewinder Headlight Bracket and 60mm LED Trailtech light TRS 4/140  RUCKUS KYMCO HUB COVER CENTER CAP MILLED or ROUND
    TRS Mikuni DF-44 Fuel Pump Bracket in Raw or Black TRS Sidewinder Headlight Bracket and 60mm LED Trailtech lightTRS 4/140 RUCKUS KYMCO HUB COVER CENTER CAP MILLED or ROUND

    Looking for a stylish way to mount your Mikuni DF-44 Rectangular fuel pump? This is IT!

    Available in Raw or Anodized

    Looking to mount a single Trailtech LED headlight to your Ruckus forks, but you're too low? This is THE setup you NEED! It allows the best mounting of the Trailtech LED headlight on your Honda Ruckus no matter how low you are! The mount is...

    Looking to cover that ugly Kymco Hub. Look no further The Ruck Shop has you covered. 6160 CNC Billet hub cover 4/140 bolt pattern. Comes with 4 M8x1.25 stainless bolts. Will work on 4/137 4/136 and 4/144 wheels. Customer may need to open holes on...

    $25.00

    $150.00

    $135.00

    $59.00

    $53.10

    TRS 6MM CNC FENDER WASHERS WITH BOLTS - GOLD AND RED ONLY TRS 9 TO NOON LICENSE PLATE FRAME CNC  6061 ALUMINUM TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS
    TRS 6MM CNC FENDER WASHERS WITH BOLTS - GOLD AND RED ONLYTRS 9 TO NOON LICENSE PLATE FRAME CNC 6061 ALUMINUM TRS AXLE SPACER KIT FOR AFTERMARKET WHEELS AND HUBS

    The TRS Fender Washer Kits include (5) 6Mx20 stainless steel bolts and 5 washers. The fender washers will fit any 10mm bolt hole under the hood of your Honda or Ruckus. The 6Mx20 bolts is recommended for all parts under your hood such as...

    NO PILL IS NEEDED TO GET YOUR PLATE STANDING UP. IT GOES FROM NINE TO NOON WITH EASY. ALL JOKES ASIDE. IF YOU WANT TO RUN YOU PLATE VERTICAL OR HORIZONTAL ALL YOU DO IS REMOVE THE 2 LITTLE BOLTS AND REPOSITION, EASY AS THAT. COMES WITH ALL...

    RRGS / NCY FRONT HUB SPACER KIT THIS KIT IS TO CENTER WHEEL FOR AFTERMARKET FRONT HUB NORMALLY USED WITH DOUGLAS, TRS, OR OTHER RUCKS WHEELS. YOU MAY HAVE TO ADD (USING WASHER) OR REMOVE (FILE) A COUPLE THOUSANTH OFF THE SPACER AS WE HAVE NO...

    $15.00

    $12.00

    $49.00

    $44.10

    $19.99

    $18.79

    TRS BATTERY BOX FUEL / LIGHT BLOCK OFF BLACK OR RAW TRS BATTERY BOX FUEL / LIGHT BLOCK OFF W/ START BUTTON SWITCH TRS Billet Aluminum Frame Caps Plugs  - 11 Styles ON SALE NOW
    TRS BATTERY BOX FUEL / LIGHT BLOCK OFF BLACK OR RAW TRS BATTERY BOX FUEL / LIGHT BLOCK OFF W/ START BUTTON SWITCHTRS Billet Aluminum Frame Caps Plugs - 11 Styles ON SALE NOW

    NOT USING THE FUEL OR HIGH BEAM LIGHT FOR GY6 SWAPS? TRS HAS INTRODUCED THE SOLUTION. YOU NEED THE PLASTIC LED HIGH BEAM / FUEL LIGHT TO KEEP THE RIDGIDNESS FOR THE BATTERY BOX, THIS IS WHY MANY GY6 SWAPS HAVE BROKEN BOX TABS BECAUSE THEY REMOVE...

    LOOKING FOR A CLEAN PLACE FOR A START BUTTON? TRS HAS INTRODUCED THE SOLUTION. YOU NEED THE PLASTIC LED HIGH BEAM / FUEL LIGHT TO KEEP THE RIDGIDNESS FOR THE BATTERY BOX, THIS IS WHY MANY GY6 SWAPS HAVE BROKEN BOX TABS BECAUSE THEY REMOVE THIS...

    Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly...

    $39.99

    $33.99

    $49.99

    $44.99

    $28.00

    $22.40

    TRS BILLET CNC HONDA RUCKUS METROPOLITAN BRAKE LEVERS V2 TRS CNC ALUMINUM RUCKUS ZOOMER CVT COVER ANKLEBITER  3 COLORS TRS FORWARD FOOTREST PEG LEGS FOR  HONDA RUCKUS MADE IN USA
    TRS BILLET CNC HONDA RUCKUS METROPOLITAN BRAKE LEVERS V2TRS CNC ALUMINUM RUCKUS ZOOMER CVT COVER ANKLEBITER 3 COLORSTRS FORWARD FOOTREST PEG LEGS FOR HONDA RUCKUS MADE IN USA

    HAVE DRUM BRAKES? WANT THAT CUSTOM LOOK. WE GOT YOU COVERED. BILLET 6160 SHORT LEVERS FOR THE HONDA RUCKUS / ZOOMER / METROPOLITAN. ALLOWS THE USE OF BRAKE LOCK AND BOTH SWITCHES. RAW OR ANODIZED BLACK INTRODUCTION PRICED AND FREE SHIPPING.

    The GET Open CVT Drive Cover aka AnkleBiter Want the look of the a GY6 ? Is your clutch always running hot and slipping . Helps prolong life of belt and Clutch pads since heat is released. No problems running in rain. This Drive cover is CNC...

    The TRS FORWARD FOOTREST is a great addition to your ruckus for that extra leg room. Great for riders who are taller or want another leg position. Attaches to side of frame.

    $69.99

    $55.99

    $89.99

    $71.99

    $65.00

    $58.50

    (1)
    TRS GY6 BILLET ALUMINUM CVT COVER AKA ANKLEBITER 3 TYPES TRS Honda  Ruckus / Zoomer Ultimate CNC Handlebar Black v2 TRS Honda Ruckus CNC Lowboy Seat Frame Gloss, Raw or  White
    TRS GY6 BILLET ALUMINUM CVT COVER AKA ANKLEBITER 3 TYPESTRS Honda Ruckus / Zoomer Ultimate CNC Handlebar Black v2TRS Honda Ruckus CNC Lowboy Seat Frame Gloss, Raw or White

     Our CVT includes a .13" THICK Stainless Steel 'backing plate' to help prevent case cracking along with covering the ugly insides of the stock swingarm, a billet machined decorative front plate, and billet aluminum

    The TRS ULTIMATE BAR Setup... It's The Ultimate Ruckus Steering System. Period! That's it!!! That's the name... That's what it is... You won't find a cleaner looking integrated handlebar and stem combo from anywhere else. We here at THE RUCK SHOP...

    LOOKING FOR A SEAT FRAME TO MOVE YOU BACK AND LOW. WE GOT IT. COMES WITH ALL STAINLESS HARDWARE, ANODIZED DOWNSTAR WASHERS (SAVES YOU $24.00) AND POWDERCOATED GLOSS BLACK, RAW OR WHITE. LIMITED QUANTITIES AVAIALABLE.

    $147.00

    $124.95

    $399.00

    $303.24

    $230.00

    $195.50

    TRS HONDA Ruckus Met Key Ignition Billet Cover  2 STYLES TRS HONDA RUCKUS STEM NECK ALLOWS SPEEDO BLINKER LIGHT TRS INTAKE BRACKET FOR AIRBOX DELETE KIT SHIPS FREE
    TRS HONDA Ruckus Met Key Ignition Billet Cover 2 STYLES TRS HONDA RUCKUS STEM NECK ALLOWS SPEEDO BLINKER LIGHTTRS INTAKE BRACKET FOR AIRBOX DELETE KIT SHIPS FREE

     Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock.
    CNC Machined out of 6061 Billet Aluminum

    TRS OLDSCHOOL TOP CLAMP NECK FOR HONDA RUCKUS. ALLOWS THE USE OF THE STOCK SPEEDO AND TURN SIGNAL INDICATOR. THIS IS FOR 7/8 BARS. CNC BILLET AND ANODIZED BLACK AND STAINLESS PLATE. COMES WITH ALL HARDWARE. Installation notes: Remove blinker lens...

    TIRED OF ZIP TIES. THIS INTAKE BRACKET REPLACED THE PVC COUPLER WE INCLUDE IN OUR AIRBOX DELETE KIT. BRACKET IS SHIPPED RAW AND MUST BE HAND BENT. YOU CAN PAINT OR POWDERCOAT IT ANY COLOR YOU CHOOSE.

    $39.99

    $31.99

    $100.00

    $90.00

    (1)

    $24.99

    $22.49

    TRS MINI RACHET WRENCH SET TRS R6 Under Seat Mount Smoke Taillight w/  Intergrated signals TRS Ruckus / Zoomer Anti-Flex Frame Bushing - SHIPS FREE
    TRS MINI RACHET WRENCH SET TRS R6 Under Seat Mount Smoke Taillight w/ Intergrated signalsTRS Ruckus / Zoomer Anti-Flex Frame Bushing - SHIPS FREE

    17-piece kit fits just about anywhere and packed full of essential bits PERFECT FOR YOUR RUCKUS OR MET. Quality ratchet and bits made from tool steel Comes with 5 cross head, 3 flat head, 2 torx head, 5 sockets and extension

     

    100% brand new and high qualitY Swap your stock Ruckus Light with these. You may need in line load equalizer for turn signals to flash. LED light color: Taillight is red, turn signal is amber Voltage: 12V Lens Color: Smoke Dimension: 6.5 x 3.3 x...

    The TRS Ruckus Anti-Flex Bushing is the answer to those who are tired of that lean that you often see with the Ruckus. This “lean” or “slant,”  is a problem created when your Ruckus has a load

    $9.99

    $8.99

    $59.00

    $53.10

    (4)

    $27.98

    $25.18

    TRS Ruckus / Zoomer Metropolitan Radiator CNC Cover TRS Ruckus BILLET Handlebar Stem neck  7/8  3 Styles TRS RUCKUS CUSTOM SEAT COVERS BRIDE RECARO DIAMOND AND MORE
    TRS Ruckus / Zoomer Metropolitan Radiator CNC CoverTRS Ruckus BILLET Handlebar Stem neck 7/8 3 Styles TRS RUCKUS CUSTOM SEAT COVERS BRIDE RECARO DIAMOND AND MORE

    Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are 6160 aluminum cut sweetness that your...

    What makes our stem different from all the others? Where is the steering tube? Say goodbye to home made hacks and shim kits to get your BMX style stem to fit, THE RUCK SHOP Billet Aluminum Steering Stem is a direct swap for the stock handlebar. 

     TRS NOW OFFERS CUSTOM SEAT COVERS. ALL YOU NEED TO DO IS REMOVE YOU OLD SEAT COVER AND INSTALL with Staple Gun. (We recommend Electric or Air Staple gun). Limited Styles. At this time we do not offer custom one off's seats.

    $35.99

    $32.39

    $74.99

    $69.74

    $125.00

    $105.00

    (1)
    TRS RUCKUS OG CNC HANDLEBAR  CNC BILLET 35MM TRS RUCKUS REAR FRAME LICENSE PLATE MOUNT 4 COLORS TRS Ruckus Zoomer  Frame Extension Spacers Billet  2 COLORS
    TRS RUCKUS OG CNC HANDLEBAR CNC BILLET 35MM TRS RUCKUS REAR FRAME LICENSE PLATE MOUNT 4 COLORS TRS Ruckus Zoomer Frame Extension Spacers Billet 2 COLORS

    THE RUCK SHOP IS BRINGING BACK THE OG (ORIGINAL GANGSTAR) BARS. YOU O.G. RIDERS REMEMBER THESE. WELL, THEY ARE BACK. YOU WILL NEED 35MM CLIP ON BARS WHICH YOU CAN FIND FOR UNDER $50. THIS IS A INEXPENSIVE WAY TO GET SOME AWESOME BARS ON YOUR...

    Got a new ruckus but don't like that big tail light assemble and you want to remove it but don't want the grind marks showing. We got the answer. The TRS mount hides the grind marks

    The TRS Frame Spacers extend the frame, pushing the seat back and giving taller riders a more comfortable riding position or just stretching your ruckus as long as you can. CNC machined from solid billet AL6061-T6 aluminum for maximum strength....

    $125.00

    $118.75

    $82.00

    $73.80

    $135.00

    $114.75

    TRS SHINEY RUCKUS MAIN FRAME BOLTS (4 PACK) TRS Stage 6 to CVK Carburetor Throttle Cable 75 INCH USA TRS TRANSFORMER HANDLE BARS 7 COLORS 7/8 RUCKUS GROM
    TRS SHINEY RUCKUS MAIN FRAME BOLTS (4 PACK)TRS Stage 6 to CVK Carburetor Throttle Cable 75 INCH USATRS TRANSFORMER HANDLE BARS 7 COLORS 7/8 RUCKUS GROM

    LOOKING TO UPGRADE YOUR STOCK FRAME BOLTS WE HAVE THE CORRECT THREAD AND PITCH FOR THE HONDA RUCKUS FRAME. GRADE 12.9 STEEL ZINC PLATED FOR CORROSSION RESISTANCE. COMES WITH STAINLESS STEEL WASHERS.

    TRS Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. TRS Throttle SSP to CVK throttle cable will also work...

    EVER GET TIRED OF THE SAME STYLE HANDLE BARS? WITH THE NEW TRS TRANSFORMER BARS YOU CAN USE YOUR IMAGINATION WITH OVER 50 DIFFERENT STYLES TO CREATE!! AVAILABLE IN ANODIZED BLACK, RED, LIME GREEN, GUN METAL, SILVER, ORANGE, AND BLUE. EACH SET...

    $11.50

    $10.35

    $37.00

    $33.30

    $99.00

    $87.12

    (1)
    TRS UNDERSEAT STORAGE THUMB SCREW TRS VIP SERIES  RUCKUS ZOOMER CVT COVER ANKLEBITER  2 STYLES TVR AIR INTAKE SYSTEM HONDA RUCKUS MET ZOOMER
    TRS UNDERSEAT STORAGE THUMB SCREW TRS VIP SERIES RUCKUS ZOOMER CVT COVER ANKLEBITER 2 STYLESTVR AIR INTAKE SYSTEM HONDA RUCKUS MET ZOOMER

    Are you Rocking a Lower Seat frame or Dorf Seat and can't flip up the seat but need to get to your registration or paperwork and a screwdrive will not work ? We have the solution you are looking for.

    The TRS VIP SERIES Open CVT Drive Cover aka AnkleBiter for THE HONDA GET MOTOR.
    Want the look of the a GY6 ? Is your clutch always running hot and slipping . Helps prolong life of belt and Clutch pads since heat is released.

    This TVR air intake kit was designed with the Honda Ruckus/Metropolitan tuner in mind. It is fully adjustable to maximize the power and efficiency of your GET Honda Ruckus no matter the temperature, altitude, or humidity levels in your area....

    $4.25

    $3.82

    $124.99

    $112.49

    $79.00

    $75.05

    121 - 156 of 156 items